Add End-Users with telephone numbers..
They will show up in Corporate Directory
:)
On Thu, Apr 10, 2014 at 9:08 AM, Dharambir wrote:
>
> Hi
> how can we configure cucm so that cisco phone displays all users
> directory.
>
> Sent from Samsung Mobile
>
>
Hey Karen,
Try upgrading or downgrading the phone firmware, then restart the tftp
service.
If it still doesn't work, try to register this phone on another call
manager.. If it still doesn't register, it might be because the phone is
messed up inside..
Are all the acting this way.. Which models a
If you don't give spanning tree portfast, then on reboot etc the device
(phone or desktop) will take 30 seconds to boot up..
On 11 Jun 2013 20:00, "singh" wrote:
>
> hi Guys,
>
> Is the command " spanning tree portfast" required under the switch ports
> on a switch connected to the phone? Doesn't
Hey ravi,
I believe it means that mgcp packets was disrupted in between transmission
resulting in packet loss etc. This error implies that there is a bug in the
ios. Try upgrading the ios and check
Regards
Shabeeb
On 21 May 2013 04:28, "ie ravindra" wrote:
> Dear All,
>
> Whats is the real mean
Hi..
Firstly, are you using CUCM or CME??
Secondly, try using a Static IP on the IP Phone. (*try using a 79XX ip
phone.. it is easier to know wat is happening*).
Thirdly, try registering a phone with static IP in the same vlan as that of
the Call Manager
Fourthly, If your using CME, make sure the
Hi,
Try restarting all the services from CUC and respective services in CUCM (*all
nodes in both servers*). Also check the application server. plus
the licensing on CUC.
Then you will have to check if there is communications from the CUC to the
CUCM servers. I mean the AXL communication. you can
try restarting the ccm services..
or did you try and figure what the issue was???
On Fri, Dec 2, 2011 at 8:02 AM, ccielabrat wrote:
> I noticed a weird thing while testing MGCP.
>
> If I call out to my pstn phone and answer the call by pressing the answer
> soft key , the call will disconnect af
Hi,
I know this must be lame and you must have already tried it, but just
incase, did you try to *manually hard-restart the IP Phone*?
Ive had a smilar problem once or twice. I had used phone button template.
It would work fine for a few days, then all of a sudden it would start
working ony like a
when you try to access your voicemail from the ip phone, what do you get??
i mean what message does it play???
On Thu, Oct 13, 2011 at 7:34 AM, Zurdo Spike wrote:
> hi expert im having problems with the integration between CUCM and UC
> everything works fine but when i tried to leave a mess in
lab exam study question? There are no FXO
> ports on the lab exam.
>
> - Reply message -
> From: "Shabeeb Mohammed"
> Date: Sat, Aug 6, 2011 9:40 am
> Subject: [OSL | CCIE_Voice] FXO lines !
> To: "Cisco Voip"
> Cc:
>
>
> configure 2 differ
configure 2 different line to use the 2 fxo line separately... i mean each
fxo line will be under separate partition and css...
On Sat, Aug 6, 2011 at 1:34 PM, Cisco Voip wrote:
> Hi all.
>
> I am using cisco 2801 with 2 fxo cards. Running CME version 7. I am using
> 7940 phone. Now is there an
The only reasons for MGCP to not register with the CUCM are -
a. Hostname mismatch
b. Domain Mismatch
c. cucm in not binded to the serial interface..
regards
shabeeb
On Sun, Jul 17, 2011 at 2:46 PM, Ashraf Ayyash wrote:
> have you got it registers with the CCM before on any of your VM spansho
i dont perticularly remember doing this on VM.. but yes i think i have.
im sorry, i dint understand what you eant by the ccm snapshots
could you clarify..
On Sun, Jul 17, 2011 at 2:46 PM, Ashraf Ayyash wrote:
> have you got it registers with the CCM before on any of your VM spanshots ?
>
> i f
Hey,
It does not violate anything.. i like to keep it simple.. i mean, i dont
like too much partitions and css..
once these start increasing, (in future) troubleshooting any issue will be a
big headache..
Cheers mate..
On Sun, Jul 17, 2011 at 9:40 AM, Peter wrote:
> Hi Shabeeb,
>
> Thanks for
im not very sure, but try doing these -
a. restart the TFTP & CUCM services
b. remove the ip domain name command. try without this..
c. erase the complete config of the router and try again.
cheers..
On Sun, Jul 17, 2011 at 12:35 PM, steven moran wrote:
>
>
> No matter what I do I cannot get
point number 2 should be enough..
On Sun, Jul 17, 2011 at 7:18 AM, Peter wrote:
> Hi,
>
> Suppose there is some requirement in the lab like, only certain extensions
> should use "Call Park" or "Meetme" feature, what will be the solution to get
> full marks?
>
> 1) By putting these Park numbers or
>
> *De:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *En nombre de *Shabeeb Mohammed
> *Enviado el:* Sábado, 09 de Julio de 2011 11:33 p.m.
> *Para:* **ccie_voice@onlinestudylist.com**
> *Asunto:* Re: [OSL | CCIE_Voice] PSTN-WAN
,DC=***,DC=***
while Connecting to ldap://172.16.39.21:389
please see the 2nd attached file
What could be the problem.. anyone???
Also I know that this is not CCIE kind of hard, but ive been stuck with this
for a while now..
Thanks
Shabeeb Mohammed
On Thu, Jul 7, 2011 at 8:59 PM, Georg
just make sure that the phone model is *7941 *or *7941G*..
check, try and update :)
On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa wrote:
> Hello I have a doubt what is reason the ip phone 7941 do not registered
> to cucm the status reject, I am sure the MAC and phone type in the cucm is
> a
work, try removing the DHCP from the CUCM and put them in the
router/switch.. while doing this dont forget the to use the option 150..
Regards
Shabeeb Mohammed
On Thu, Jun 16, 2011 at 6:39 PM, Vinay Kumar6 wrote:
> Hi,
>
> Facing difficulty in registering the HQ Phones to CUCM, R
45[0-3] will do... we will get 4 numbers here..
On Sun, Jun 12, 2011 at 8:17 AM, donny f wrote:
> hi all,
>
> when we asked to configure "park" up to 4 simultaneous call.
>
> mean we will need 45[0-3] or 45[0-4] ?
>
> tks
>
> ___
> For more inf
chill dude.. my colleague had to attempt the exam 6 times before he got
thru... and worst of all, no repeated questions..
just study.. yu gonna get thru soon..
if you looking for a different guide,
check http://www.ievoicelab.com/
its good.. really good..
cheers mate..
On Tue, Jun 7, 2011 at 6:
Hi,
All you need is the IOS supporting voice. then activate the telephony
services with auto registration.
Connect the phones and it should work.
If you need to confire each phone via GUI, then you will need the GUI file
in your flash. this is separate and it doesnt come with the IOS. There are
l
23 matches
Mail list logo