Anyone know how to verify the voice gateway send the dtmf through the PRI
port? Any debug command or ccm trace we can get?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and lo
Can anyone explain what's the different between vm pilot method(hunt pilot
-- hunt list... + direct routing rule in cuc) and cti route point method(set
the dn of route point which forward all to vm) when implementing cuc AA?
___
For more information regar
Tamer Ismail***
>
> *CONNECT Professional Services*
>
> **Website: www.connectps.com**
>
>
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *So Gwaai
> *Sent:* Sunday, December 05,
In Lab 1 , I'm confused what the via zone gk behaior: what I understanding
is that gk will ignore "invia" when receiving ARQ message. But I found that
cucm-->trunk-->gk+cube-->cucme is through normal gatekeepr behavior
But
cucme-->gk+cube-->trunk-->cucm is through CUBE.
Anyone can explain thi
According to the CUCM system guide, the sip dial rule for 7965 is "optional"
since this phone type run KPML. And under srst mode, sip phone use the dial
rule which received from cucm.
I've just want to know that whether we need to config the sip dial-rule for
the SRST?
Hi guys,
Some interesting founding: when I call from pstn phone to hq vm pilot number
using primary-ni, it failed and get following error message: Cause i =
0xC0E50D - Message not compatible with call state".
But when I call to hq phone, it's normal.
After I change to primary-net5 , it success to
Hi guys,
Anyone know that how to send caller name under voip dial-peer, not pots
dial-peer?
Under the GK testing (UCM --> GK--> UCME) I can click "display IE Delivery"
in UCM and then I can see the caller name in the phone which registered in
UCME, but I can't find any command under UCME which l
Just sharing:
The next version of CUCM (8.x) can be run on Cisco UCS (Unified Computing
System).
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
For the AAR configuration, we need to set AAR CSS in the line only. How
about the function in the GW since we can set this in the incoming call
setting?
I feel quite confusing that aar is use in between ip-phone, not between
ip-phone and GW.
Thanks for the help
___
Hi all,
Just testing the AAR and success, but when I put the aar group to none in
line and add it to device, the phone can't rerouting it. Anyone know that
the difference between putting aar group in line and in device?
And I found that the gateway also has aar group setting, is that for another
I use trunk method, base on the following:
http://www.cisco.com/en/US/docs/ios/lanswitch/configuration/guide/lsw_hwic_ethsw_ic_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1049866
Hope that can help.
On Wed, Sep 2, 2009 at 12:56 PM, Jonathan Charles wrote:
> It is a legacy config b
Just want to fully replace the UCM build-in TFTP function.
On Tue, Sep 1, 2009 at 4:22 PM, Tanner Ezell wrote:
> That really depends on what you what to accomplish... can you be more
> specific.
>
> On Tue, Sep 1, 2009 at 1:18 AM, So Gwaai wrote:
>
>> Hi guys,
>>
&g
Hi guys,
Anyone know that I can use the third-party TFTP server or not. And what file
do I need to put into the TFTP server?
Thanks for any help
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
3725 cannot act as UCME 7 & SRST 7 since the limitation of the IOS (up to
12.4.15 T)
The IOS requirment is at least 12.4 22 T (correct me if I'm wrong)
On Mon, Aug 17, 2009 at 1:36 AM, Ravindra Lakpriya wrote:
> Hello guys,
>
> I'm in process for buying some equipments for the home lab.
>
> I'm
not hard and fast)
>
> US/Canada – 911 for emergency
> UK – 999 for emergency
> Europe – 112 for emergency
>
>
> Best regards
>
> Mick
>
> E: m...@pobox.net.uk
>
>
> --
> *From: *Bill Hatcher
> *Date: *Sun, 16 Aug 200
When access the pstn, we need to dial 9 in US, but how about in other
countries?
It seems different countries have different pstn access code although this
code is not sent to carrier. Where I can find this info?
Thanks for any help.
___
For more inform
Anyone have the solution to let "SNMP master agent" run in the UCM which run
in vmware? I know this is one of the major limitation of install cisco uc
appliance in vmware.
___
For more information regarding industry leading CCIE Lab training, please visit
sk) it takes maybe 2 minutes to bring UCM up.
> How long does it take for the CLI to come up? And are you logging into the
> CLI after it does.
>
> As I recall, there is an issue with VMware UCM that prevents anything from
> happening until after you log into the CLI.
>
> On Sat,
Hi,
I'd just want to know if any significance improvement when I move my vmware
based (vmware workstation 6.5) CUC from the SATA harddisk to SSD harddisk?
Since I need to wait more than 10 min to get the GUI login prompt after the
CLI prompt appear...
Thanks for any help
_
19 matches
Mail list logo
