I am trying to configure the HWIC-9-ESSW module for connecting to the IP
phones.
For normal switch ports this should be configured as an access port.
I am can get the phones to register when configured as an access port, it
works fine when configured as a trunk port.
Want to make sure if trunk is t
For the records. I was able to get it to work . My Call manager cluster is
on a VMWARE setup.
I had to deactivate and activate the scope for BR1 and that fixed the issue.
Thanks for all those who responded.
Regards
Suresh
On Tue, Apr 22, 2008 at 12:28 AM, Suresh Velayudhan <[EMAIL PROTEC
I have a problem where the BR1 phones are not able to obtain the IP address
from the DHCP configured on the PUB.
Here are the relevant BR1 configs. This is from the IPExpert lab workbook.
Section 1.4
interface FastEthernet0/1/6
switchport trunk native vlan 110
switchport mode trunk
switchport