2833’
option, while keeping oob method - ‘Use DTMF KPML’ option checked. After this
change, DTMF was correctly recognized by CUC.
Thanks for your input.
-Tapan
From: Dan Quinlan (daquinla)
Sent: Monday, June 11, 2012 11:58 PM
To: Tapan Gautam (tgautam)
Cc: ccie_voice
Bill,
If I turn off crtp, everything works fine.
Thanks,
Tapan
From: Bill Lake [mailto:whl...@gmail.com]
Sent: Tuesday, June 12, 2012 11:29 AM
To: Krishna
Cc: Dan Quinlan (daquinla); Tapan Gautam (tgautam);
ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] DTMF from
Hey Guys,
When I call CUC pilot from BR1 phone, the dtmf tones are not recognized
properly by CUC, i.e. BR1 phone cannot login to mailbox or select any other
option via DTMF. If I remove crtp, everything works fine.
Topology:
SCCP phone(BR1 site) à g729r8 with crtp à CUCM à SIP
Based on my testing in the home lab, I suggest to not use 'ntp master'
and ntp server at the same time. To sync to an external source, all you
need is 'ntp server' command. Also, I could not find a cli command to
setup ntp in CUCM, only way to do it is via GUI.
Good luck!!!
Hth,
Tapan
Try this
http://pushkarbhatkoti.wordpress.com/category/cue-voicemail-vpim-network
ing-cue-to-unity-in-10-minutes/
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Joaquim
Fernandes
Sent: Friday, August 06, 2010 8:23 AM
To:
I think, if you read the explanation as,
it configures the drop thresholds for queue set 2 to 40 and 60 percent
of the allocated memory, guarantees 100% of the allocated memory, and
configures 200% as the maximum memory that this queue set can have
before packets are dropped. , it would make
Remove $ from dial-peer 7. It'll wait for inter-digit timeout and match
dial-peer 9 after you press the last digit.
Let me know if that works.
Hth,
Tapan
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Erwan Erwan
Sent:
Hi Matthew,
My understanding is that you trust dscp on uplink ports. There is a
cos-dscp mapping table and you enable mapping using mls qos map
cos-dscp command. More details here,
https://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_no
te09186a0080883f9e.shtml
Hope
Hi Jeff,
Have you tried following configuration. If not, give it a shot.
!
gatekeeper
zone local ZONE_1 asccie.com 10.5.200.1
zone prefix ZONE_1 1775... gw-priority 10 CUCM_GK_TRUNK_2
zone prefix ZONE_1 1775... gw-priority 9 CUCM_GK_TRUNK_1
zone prefix ZONE_1 1775...
Clear counters. Place a call and check interface stats using 'show mls
qos interface port# statistics'. Could not locate any other command.
Tapan
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Erwan Erwan
Sent: Monday, May 24,
10 matches
Mail list logo