Hi All,
Let say we need to make sure the same call feature remains during SRST, and
there is a share line with cbarge during normal CUCM operation. However, if the
requirement is
"Do not pre-define any ephone or ephone-dn in running-config"
how would you interupt this?
The simplest way is t
Hi all
Just want to get some advise regarding LAN QoS.
Let say if the question ask to apply priority queue and specify certain drop %
based on a COS value to the interface that connect to the router. What would
you do with the interface that connecting to the phone?
The reason I asked is beca
Hi all
First of all, let me clarify that I am not trying to break NDA or trying to
sell anything here, just something I cant get my head around with.
I just had my second attmpt yesterday, and I failed. What really demoralising
for me is that I thought I was fully prepared. What even more demo
uot; as follows?
class-map match-any foo
match access-group rtpports
match ip dscp cs1
thanks,
/Baktha
Message: 3
Date: Sat, 4 Feb 2012 00:18:28 -0800 (PST)
From: Vega Wong
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Vol2 Lab8 Question5.6
Message-ID:
Hi experts
I am working on question 5.6 in Vol 2 Lab 8. But I dont understand how the DSG
explains the answers.
Questions:
HQ and BR1 - 768kbps
PQ for 4 calls
5% for signalling
mark the excess RTP traffic (failed RSVP) to 33%. (this type of RTP been marked
as CS1 in earlier question)
Ensure FR
Hi
I found it easier to understand or familise with the configuration steps if
practise IPMA and Extension Mobilty separately.
As for the URL, you can find them in the CUCM SRND.
Cheers
--- On Wed, 25/1/12, Jeferson Guardia wrote:
From: Jeferson Guardia
Subject: Re: [OSL | CCIE_Voice
Hi experts
I am working on Vol 2. Lab 7 and try to fully understand the topic of voice
mail access during AAR, but I am struggling to have a clear picture. Here is
the setup
HQ GW - MGCP
BR GW - H323
HQ Phones, and BR Phones are both SCCP. The line on both phone been assigned to
the same AAR g
Hi there
Actually, as this is a real live customer, so perhaps suggest to the customer
that he can run his remote sites as CME, and setup a trunk between the CUCM at
the main site and the CMEs at the remote sites.
Of course there will be implication in regards to the dial plan and other
confi
Hi experts
I am working on the topic of LAN QoS. I understand we will be given tasks to
modify the setting on the egress queues of the switches. The setting includes,
buffer sizes, shape and share setting etc.
My question is, is there a best practise on what values these figures should
chan
: vega2...@yahoo.com.au
Subject: Re: [OSL | CCIE_Voice] H323 debug messages
iOS 12.4 troubleshooting guide.
Sent from my iPad
On 4/10/2011, at 6:52 PM, "Vega Wong" wrote:
Hi experts
I am trying to practise different scenario with H323 gateways and gatekeepers.
Does anyon
Hi experts
I am trying to practise different scenario with H323 gateways and
gatekeepers.
Does anyone have any good reference to read those output from debug h225
asn1 ??
Thanks
___
For more information regarding industry leading CCIE L
g-if)#ip access-group 100 in
apply it to the up link interface, now I don't do ACL's very often so I could
easily have this wrong, you might have to configure it on the router and have
it block on the incoming port from the switch. This should stop all ip
239.1.1.1 traffic.
callers, the PSTN phone is getting the moh stream
from CUCM.
--- On Thu, 29/9/11, Bill Lake wrote:
From: Bill Lake
Subject: Re: [OSL | CCIE_Voice] MOH with H323 gateway
To: "Ashraf Ayyash"
Cc: "DeShon Crayton" , "Vega Wong"
, ccie_voice@onlinestudylist.com
Re
the mgcp gw, I can hear the moh stream from router (my own music file).
I am really confused here, I just cant work out why I cant get the h323 to
stream the moh to the PSTN caller as the mgcp gw does.
Thanks guys
--- On Wed, 28/9/11, Vega Wong wrote:
From: Vega Wong
Subject: Re:
SL | CCIE_Voice] MOH with H323 gateway
To: "'Vega Wong'" , ccie_voice@onlinestudylist.com
Received: Wednesday, 28 September, 2011, 8:20 AM
Hello Vega, There could be many reasons as to why the MOH for the h323 gw is
not working properly. Can you forward your config.. I wo
Hi Experts
I am doing some testing with streaming multicast MOH from the router flash, but
I encounter a strange issue. Hoping someone can point me to the right direction
to tackle this.
I have setup two sites - HQ and BR1. HQ is setup with H323 gateway, BR1 is
setup with mgcp gateway. I have
Actually I sorted it out, I didnt set the CSS in the CTI Route point and CTI
port.
I outlooked it.
Thanks :)
--- On Sat, 10/9/11, Ashraf Ayyash wrote:
From: Ashraf Ayyash
Subject: Re: [OSL | CCIE_Voice] Problem with UC and CUCME integration
To: "Vega Wong"
Cc: "
Hi team
Can you tell me where I can check the MWI setting in UC whether it is notified
or Unsolicited?
I tried to configure as unsolicited but it doesnt work.
Thanks team
--- On Tue, 6/9/11, Ashraf Ayyash wrote:
From: Ashraf Ayyash
Subject: Re: [OSL | CCIE_Voice] Problem with UC and CUC
Hi Experts
This is not exactly a specific question but rather hoping you can share your
experience.
I am going through the topic of route plan. From various lab exercises, I can
see that there are quite a few different approach or way to achieve the route
plan requirements. Then I have to ask
not reset the phone which is registered to
the Sub, and the new configure doesnt seems to pass to the Sub?
Did I miss something here?
--- On Tue, 2/8/11, CCIEVoiceKP wrote:
From: CCIEVoiceKP
Subject: Re: [OSL | CCIE_Voice] Stange problem with Subscriber and Publisher
To: "Vega Wong
Hi Experts
I am having a strange problem with my Pub and Sub. I have installed them on
EXI, and the services can starts up in each of the CUCM fine.
My problem is, when the phones are registered to the Sub, any config other than
the DN doesnt seems to pass down to the phones. i.e. Date group,
Hi
In that case, you can use translation rule to add the + sign in front of the
number
--- On Thu, 28/7/11, CCIE for Me wrote:
From: CCIE for Me
Subject: Re: [OSL | CCIE_Voice] Plus sign on display of phone - assistance
To: "Kshitij Singhi" ,
ccie_voice@onlinestudylist.com
Received: Thur
Hi
Thanks for the advices,
I sort out the offline issue, it was because I didnt setup DNS for CUPC to
connect to CUPS. Once thats setup, IM works as well as Presence status.
Just one more thing, by manually adding the contact, I couldnt save the phone
number of the contact. That means I cant
Hi Experts
I am working on CUPS and CUPC at the moment, I just have some questions with
the setup. So far I have done:
I have successfully set up the integration between CUCM and CUPS. As I can see
all the users and the SIP trunks automatically appears in CUPS.
IPPM works on IP phones, I can
Hi experts
Many experts had advised that time management is a very important ( if not the
most important) aspect during the lab. This leads me to wonder some of the
smaller things during the lab:
1. What can we bring in to the lab? Water bottle?
2. How long is the lunch break? Is it allocated at
: Re: [OSL | CCIE_Voice] Problem with 7961
To: "Bill Lake"
Cc: "Vega Wong" , ccie_voice@onlinestudylist.com
Received: Sunday, 10 July, 2011, 11:05 PM
I had this problem once where my 7961 and 7970 would simply NOT work when I
issued not only the 1234567879*0# sequence, but
Hi Experts
I think my 7961 phone is faulty, when I plugged it into the switch, all LED are
on and stayed on. Nothing come up on the screen.
I tried to factory default it by pressing the "#" key, but it doesnt seems to
response.
Has anyone encounter something like this?
Please help
Thnaks
__
Hi experts
I have installed uccx in vmware, the installation seems fine.
However, I am having problem with the CUCM integration (which is also installed
in vm).
I have tried to run "Cisco JTAPI Resync", but I keep getting this error:
"An error has occurred while trying to resynchronize the
Hi guys
I need help in setting up AA in Unity Connection.
I have setup a new call handlers called AA in Unity Connection with the
extension set to 5000 with the setup of the user inputs.
In CUCM, I have created a CTI route point with DN 5000, setting the CFA to
voice mail.
The prob
hi guys
Where did you attempt your lab exam?
Cheers
--- On Mon, 20/6/11, Cristobal Priego wrote:
From: Cristobal Priego
Subject: Re: [OSL | CCIE_Voice] interesting post
To: "George Goglidze"
Cc: ccie_voice@onlinestudylist.com
Received: Monday, 20 June, 2011, 7:01 AM
that's why i said it's i
Hi
I am trying to setup up two frame relay PVCs on a serial interface (WIC-1T).
On one PVC, I will have a bandwidth of 1536kbps, and 768kbps on the other
one. This gets me thinking that the total bandwidth would be 2304kbps
(2.25Mbps).
I may be wrong, but I thought on a serial interface -
31 matches
Mail list logo
