I have no experience in doing this but once upon a time I was also looking for
this and I had an old bookmark that could be helpful ( you might have already
come across it.)
http://www.cisco.com/en/US/docs/ios/voice/ivr/configuration/guide/ivrappb.html#wpxref17121
http://www.cisco.com/en/US/docs/ios/voice/vxml/developer/guide/refgde3.html
Ps. Your skills need to be TCL aware
________________________________
From: "ccie_voice-requ...@onlinestudylist.com"
<ccie_voice-requ...@onlinestudylist.com>
To: ccie_voice@onlinestudylist.com
Sent: Wednesday, 22 February 2012 10:47 PM
Subject: CCIE_Voice Digest, Vol 72, Issue 127
Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com
To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com
You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."
Today's Topics:
1. Re: VXML on MGCP Gateways (Ricardo)
2. Re: srst softkeys (Jonathan Charles)
3. Re: LAN QoS, cBarge in CME SRST (Baktha Muralidharan)
4. Re: cBarge in CME SRST (Rynard Coetzee)
5. When does IPMA route point show as registered? (Anthony Alba)
----------------------------------------------------------------------
Message: 1
Date: Wed, 22 Feb 2012 12:00:04 -0500
From: Ricardo <ricardoareval...@gmail.com>
To: wormh...@sch.hu
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] VXML on MGCP Gateways
Message-ID:
<CAJzGwY2yh4xZ+oA-gV__6GZWA=138x5BYmYGc40CYs7KBSwO=g...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Yes Peter, I have done all those options and they all work.
I just want to know how to configure VXML on MGCP, I have seen several
comments that it can be done, but nobody seems to know how to do it, and
there is no clear documentation about it in Cisco web page
I think this could come in handy, and a good trick up our sleeves.
Regards
//r.a.
2012/2/22 "Farkas P?ter" <wormh...@sch.bme.hu>
> I am not familiar with VXML but you may do it as configuring the gateway
> being also as a H323 gw and send the call back to it from CUCM. You set up
> a dial-peer for incoming h323 call and enable bacd on it.
>
> Also if you have CU or CUC than it can do it for you.
>
> Peter
> ----- Original Message -----
> From: Ricardo <ricardoareval...@gmail.com>
> Date: Wednesday, February 22, 2012 3:51 pm
> Subject: [OSL | CCIE_Voice] VXML on MGCP Gateways
> To: ccie_voice@onlinestudylist.com
>
>
> > Hi Guys,
> >
> > I am doing a lab thinking out of the box... what if we want to set a
> b-acd
> > tcl-like but for a gateway running MGCP, so a message is played before
> > sending to receptionist or . I know TCL doesn't work with MGCP, but VXML
> > does... do you have any idea how to set it up?
> >
> > best regards
> >
> > //r.a.
> > _______________________________________________
> > For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120222/c24037af/attachment-0001.html>
------------------------------
Message: 2
Date: Wed, 22 Feb 2012 11:07:05 -0600
From: Jonathan Charles <jonv...@gmail.com>
To: Ken Wyan <kew...@gmail.com>
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] srst softkeys
Message-ID:
<caplpvzifwmgo+-ujb2-azldzs35rwekm8w4_u1_vqe3mlhu...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Has a recent call been made?
Redial will be dimmed if there are no calls to redial...
Jonathan
On Wed, Feb 22, 2012 at 10:16 AM, Ken Wyan <kew...@gmail.com> wrote:
> I configured srst ( using telephony-service) .
>
> When phones are in fallback mode Redial softkey is dimmed on 7965 phones.
>
> As per cisco docs , only unsupported softkeys are dimmed in srst mode.
>
> Is this normal or can be any mistake?
>
> Ken
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120222/16c7858c/attachment-0001.html>
------------------------------
Message: 3
Date: Wed, 22 Feb 2012 12:29:23 -0500
From: Baktha Muralidharan <muralic...@gmail.com>
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] LAN QoS, cBarge in CME SRST
Message-ID:
<ca+ne39wyazxle+mxgqyv72zwxsokvdn36uy6usze-krmf8t...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
If nothing specific is required for traffic from/to the phones, I would not
do anything there.
Run the auto qos on an unused port.
Thanks,
/Baktha
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 22 Feb 2012 02:13:29 -0800 (PST)
> From: Vega Wong <vega2...@yahoo.com.au>
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] LAN QoS
> Message-ID:
> <1329905609.25199.yahoomailclas...@web65905.mail.ac4.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi all
>
> Just want to get some advise regarding LAN QoS.
>
> Let say if the question ask to apply priority queue and specify certain
> drop % based on a COS value to the interface that connect to the router.
> What would you do with the interface that connecting to the phone?
>
> The reason I asked is because if auto-qos is used on the phone ports, a
> few config line will be generated, such as policy map etc. Do you normally
> leave those in there on the phone ports?
>
> Cheers
>
> Vega
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> </archives/ccie_voice/attachments/20120222/4edd7d04/attachment-0001.html>
>
>
Pls make sure you have configured the ephone-dns to be octo-line
thanks,
/Baktha
------------------------------
>
> Message: 2
> Date: Wed, 22 Feb 2012 12:35:57 +0000
> From: Rynard Coetzee <rynard.coet...@bytes.co.za>
> To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
> Subject: [OSL | CCIE_Voice] cBarge in CME SRST
> Message-ID:
>
> <97D19F256B859A48A6A93E8A9210E52A17AF8BBE@BYTESEXCH2K10N1.bytes.local>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi All
> I have an issue to get the cBarge to work when my H323 GW goes into SRST
> ,the shared line shows up on both phones ,but when I have an active call on
> one phone ,I don`t see the number on the other phone ,and the other phone
> does not go into remote in use state when I press the shared line button. I
> have privacy turned off under the ephones and also under the telephony
> service. Also my CFB is registered to the router when in srst mode ,I am
> able to make a normal ad-hoc conference when in srst mode.
> Any ideas ?
> Regards
> Rynard
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> </archives/ccie_voice/attachments/20120222/4065d064/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 22 Feb 2012 13:58:15 +0100
> From: "Farkas P?ter" <wormh...@sch.bme.hu>
> To: Rynard Coetzee <rynard.coet...@bytes.co.za>
> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
> Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST
> Message-ID: <770ca7cc57a8.4f44f...@sch.bme.hu>
> Content-Type: text/plain; charset=us-ascii
>
> Have you tried to turn off privacy and enable remote-in-use sofktkey
> through an ephone-template attached to the ephone? Privacy setting on
> ephone has a bug in SRST mode.
>
> Peter
> ----- Original Message -----
> From: Rynard Coetzee <rynard.coet...@bytes.co.za>
> Date: Wednesday, February 22, 2012 1:51 pm
> Subject: [OSL | CCIE_Voice] cBarge in CME SRST
> To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
>
>
> > Hi All
> > I have an issue to get the cBarge to work when my H323 GW goes into
> SRST ,the shared line
> > shows up on both phones ,but when I have an active call on one phone ,I
> don`t see the number on
> > the other phone ,and the other phone does not go into remote in use
> state when I press the
> > shared line button. I have privacy turned off under the ephones and also
> under the telephony
> > service. Also my CFB is registered to the router when in srst mode ,I am
> able to make a normal
> > ad-hoc conference when in srst mode.
> > Any ideas ?
> > Regards
> > Rynard
> > _______________________________________________
> > For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
> ********************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120222/c9bea1f5/attachment-0001.html>
------------------------------
Message: 4
Date: Thu, 23 Feb 2012 06:03:06 +0000
From: Rynard Coetzee <rynard.coet...@bytes.co.za>
To: "wormh...@sch.hu" <wormh...@sch.hu>
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST
Message-ID:
<97D19F256B859A48A6A93E8A9210E52A17AF8C26@BYTESEXCH2K10N1.bytes.local>
Content-Type: text/plain; charset="iso-8859-1"
Yes I have tried it under the template and under the ephone.
-----Original Message-----
From: "Farkas P?ter" [mailto:wormh...@sch.bme.hu]
Sent: 22 February 2012 02:58 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST
Have you tried to turn off privacy and enable remote-in-use sofktkey through an
ephone-template attached to the ephone? Privacy setting on ephone has a bug in
SRST mode.
Peter
----- Original Message -----
From: Rynard Coetzee <rynard.coet...@bytes.co.za>
Date: Wednesday, February 22, 2012 1:51 pm
Subject: [OSL | CCIE_Voice] cBarge in CME SRST
To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
> Hi All
> I have an issue to get the cBarge to work when my H323 GW goes into
> SRST ,the shared line shows up on both phones ,but when I have an
> active call on one phone ,I don`t see the number on the other phone
> ,and the other phone does not go into remote in use state when I press
> the shared line button. I have privacy turned off under the ephones
> and also under the telephony service. Also my CFB is registered to the router
> when in srst mode ,I am able to make a normal ad-hoc conference when in srst
> mode.
> Any ideas ?
> Regards
> Rynard
> _______________________________________________
> For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
------------------------------
Message: 5
Date: Thu, 23 Feb 2012 14:47:31 +0800
From: Anthony Alba <ascanio.al...@gmail.com>
To: CCIE Study <ccie_voice@onlinestudylist.com>
Subject: [OSL | CCIE_Voice] When does IPMA route point show as
registered?
Message-ID:
<CADkWibfDrCf-oHNHrvOvz5jX+-mjU=j91chpg1ervjvjym6...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
I would like to build-up a step-by-step IPMA Proxy mode checklist and
verification.
If you configure the IPMA route point (with DN a superset of Managers' DNs
like 5XXX), configure the IPMA Service Parameters
on both Pub/Sub and restart he IPMA service, ought the IPMA route point
appear as registered?
(at this stage I have no Managers or Assistants configured)
In my brief testing this usually doesn't happen (I suspect my VMs), but I
would like to confirm whether the IPMA route point should appear registered
or unregistered without any user configuration (yet).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120223/ef70f719/attachment.html>
------------------------------
_______________________________________________
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice
End of CCIE_Voice Digest, Vol 72, Issue 127
*******************************************
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
