I agree sounds like you didn't create the hunt pilot or hunt list
Sent using the free mail.com iPhone App
On 9/3/12 at 8:19 AM, Bruno Takahashi wrote:
> I think the first question is, can you dial to 2220? I assume not since you
>
> already get a busy tone when pressing the Message button.
>
> 2
> Priority goes in this order
>
> Priority queue out
> Shape
> Share
>
> If lets say for example you want cos 5 to be in the priority queue but it
> also states that cos 5 should have no more than 25 percent of the bandwidth.
> Of course in the mappings you need to put cos 5 in que 1. Then y
Take a look to make sure your transcoder is good and registered at sc. Also if
you have RSVP or qos between sc and hq check to make sure that configuration is
good. Make a call between phones from hq and sc and see if audio is good.
Jason
On 8/15/12 at 12:37 PM, Randall Crumm wrote:
> Hello,
I agree with Dan there isn't a service URL to configure with Unity Connection.
Only URL you need to make sure is there and changed from host name to ip
address is the authentication URL in Enterprise Parameters.
Jason
On 8/1/12 at 9:49 PM, Dan Quinlan (daquinla) wrote:
> There isn't one. You
If you are only setting it up in desk phone mode you can ignore the tftp
errors. You only need tftp working when you need to set it up in softphone
mode. Meaning you created a UPC device in CUCM for it.
Jason
On 7/23/12 at 10:10 AM, A NN wrote:
> Hi list,
>
> I set up CUPC in deskphone mode
