Hello,
I am running into some problems with cucm/gatekeeper configuration.
For some reason only the PUB trunk is being registered.
Is the SUB trunk to register automatically or do i need to configure
something for that to happen ?
interface Loopback0
ip address 177.1.254.1 255.255.255.255
ip
Hi,
It seems you don't have Sub in CM Group configured for your trunk. Remember
to restart it later.
regards
kobel
On Sun, Jan 9, 2011 at 22:39, Joli-coeur Wouter wrote:
> Hello,
>
> I am running into some problems with cucm/gatekeeper configuration.
> For some reason only the PUB trunk is bei
Hi Joli:
Make sure your trunk has been assigned a device pool that has a call manager
group with both servers listed. If it is using the Default DP it would only
be registering to the PUB.
hth...scd
On Sun, Jan 9, 2011 at 2:39 PM, Joli-coeur Wouter wrote:
> Hello,
>
> I am running into some p
Hi,
Check that the device pool that you have assigned to the trunk has
appropriate CCM GROUP that contains both Call Managers...
Cheers,
On Sun, Jan 9, 2011 at 9:39 PM, Joli-coeur Wouter wrote:
> Hello,
>
> I am running into some problems with cucm/gatekeeper configuration.
> For some reason o
Thanks for the info
I have a sub configured for the correct CM group and the device pool has the
correct CM group and the trunk is in the correct device pool.
I think it might be a vmware problem or database problem?
i just want to be sure that normally both trunks should show up if they are
can you ping the sub? check connectivity between pub/sub and between gk/sub
too.
what's the db replication status?
you can check this by running this command on the sub and pub:
"show perf query class "Number of Replicates Created and State of
Replication"
The state has to be "2".
On Sun, Jan
ist.com] On Behalf Of Joli-coeur Wouter
Sent: dimanche 9 janvier 2011 23:53
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Gatekeeper trunk registration (SUB)
Thanks for the info
I have a sub configured for the correct CM group and the device pool has the
correct CM group and t
Could be a replication problem. Make sue the ccm cluster is in sync.
Sent from my Verizon Wireless Phone
- Reply message -
From: "Joli-coeur Wouter"
Date: Sun, Jan 9, 2011 5:52 pm
Subject: [OSL | CCIE_Voice] Gatekeeper trunk registration (SUB)
To:
Thanks for the info
I
Good Luck.
From: Friderich Claude To: Joli-coeur Wouter ; ccie_voice@onlinestudylist.comSent: Sun, January 9, 2011 7:00:46 PMSubject: Re: [OSL | CCIE_Voice] Gatekeeper trunk registration (SUB)
Hi,
Yes both trunks should be shown on your gk endpoints
You can check if everything is ok in the CCM re
Try Changing the CCM Group listing nd make the Sub the 1st in the listing or
priority and see whether SUB trunk is getting registered??
ThanksM
--- On Mon, 1/10/11, bkvalent...@gmail.com wrote:
From: bkvalent...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Gatekeeper trunk registration (SUB)
To
@onlinestudylist.com; bkvalent...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Gatekeeper trunk registration (SUB)
Try Changing the CCM Group listing nd make the Sub the 1st in the listing or
priority and see whether SUB trunk is getting registered??
Thanks
M
--- On Mon, 1/10/11, bkvalent...@gmail.com
11 matches
Mail list logo