has a check in the check box.
>
> *From:* Mohammed Al Baqari
> *To:* 'ccielabrat' ; ccie_voice@onlinestudylist.com
> *Sent:* Thursday, December 8, 2011 12:13 AM
> *Subject:* Re: [OSL | CCIE_Voice] Dtmf problem with MVA
>
> Use the command “debug voice applicat
8, 2011 12:13 AM
Subject: Re: [OSL | CCIE_Voice] Dtmf problem with MVA
Use the command “debug voice application” and post the output after your enter
the DTMF digits.
Regards,
Mohammed Al Baqari
From:ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On
1:59 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Dtmf problem with MVA
I have MVA configured on my h323 router, with the appropriate dial peers as
per the Cucm help pages.
I am able to call into the piloting dn and I can hear the MVA application
prompt me for my pin.
When I
I have MVA configured on my h323 router, with the appropriate dial peers as
per the Cucm help pages.
I am able to call into the piloting dn and I can hear the MVA application
prompt me for my pin.
When I press any digits, they are not recognized.
I've tried to force a g711 codec and ensured Dtmf-re
Hello I have a doubt, when is configured CUBE and this have xcode configured
and also other xcode registered to CCM, how I can to know the xcode of where
this being used?
Thanks.
La informaci?n incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO
ile 2 mtp
>> codec g711alaw
>> maximum sessions hardware 8
>> maximum sessions software 100
>> associate application SCCP
>>
>> Date: Sat, 28 May 2011 23:53:21 +0200
>> From: Miron Kobelski
>> To: Franjo Briski
>> Cc: ccie_voice@onlinestudyl
imum sessions hardware 8
> > maximum sessions software 100
> > associate application SCCP
> >
> > Date: Sat, 28 May 2011 23:53:21 +0200
> > From: Miron Kobelski
> > To: Franjo Briski
> > Cc: ccie_voice@onlinestudylist.com
> > Subject: Re: [OSL | CCIE_Vo
ate: Sat, 28 May 2011 23:53:21 +0200
> From: Miron Kobelski
> To: Franjo Briski
> Cc: ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] DTMF problem
> Message-ID:
> Content-Type: text/plain; charset="utf-8"
>
> Hi,
>
> UCCX is integrated using CTI, whi
+0200
From: Miron Kobelski
To: Franjo Briski
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] DTMF problem
Message-ID:
Content-Type: text/plain; charset="utf-8"
Hi,
UCCX is integrated using CTI, which uses out-of-band DTMF signaling. This is
compatible with H.323, whi
Hi,
UCCX is integrated using CTI, which uses out-of-band DTMF signaling. This is
compatible with H.323, which is used between CUCM and CUBE in your case, but
not with what ITSP provides. CUBE should convert inband DMTFs received from
ITSP to OOB H.245 DTMF transport.
I'd check configuration of CU
Hello.
I installed CUCM, and UCCX at customer site. System is connected to
ITSP using SIP trunk via CUBE. Calls are passing through but when
someone calls in and get
UCCX Basic-ACD the DTMF signals dont't pass. I know ITSP is using
in-band DTMF and not using any kind of dtmf-relay. Not even rfc
;m not sure why this happend but I need to reload all configs into servers and
router so the next time I will try again and see if the problem persist
Thank very much for your help and time
Date: Tue, 2 Mar 2010 18:19:30 -0430
Subject: Re: [OSL | CCIE_Voice] DTMF PROBLEM UNITY C
mf are being sent in band), any
> way to send then out of band?
>
> I have look at ccm service parameter with no luck, also at device>phone but
> i can't find anything related to this...
>
>
> Thanks again
> --
> Date: Mon, 1 Mar 2010 21:
t ccm service parameter with no luck, also at device>phone but i
can't find anything related to this...
Thanks again
Date: Mon, 1 Mar 2010 21:10:43 -0430
Subject: Re: [OSL | CCIE_Voice] DTMF PROBLEM UNITY CON AND SIP PHONE
From: o...@ipexpert.com
To: gorr...@hotmail.com
Hi Angel,
Doe
--
> Date: Fri, 26 Feb 2010 17:31:54 -0430
>
> Subject: Re: [OSL | CCIE_Voice] DTMF PROBLEM UNITY CON AND SIP PHONE
> From: o...@ipexpert.com
> To: gorr...@hotmail.com
> CC: ccie_voice@onlinestudylist.com
>
> Hi Angel,
>
> Have you tried to move the br1 p
Hello:
Otto, wich ccm traces do suggest me? "All Phone Device Trace" or trace by device
Thanks
Date: Fri, 26 Feb 2010 17:31:54 -0430
Subject: Re: [OSL | CCIE_Voice] DTMF PROBLEM UNITY CON AND SIP PHONE
From: o...@ipexpert.com
To: gorr...@hotmail.com
CC: ccie_voice@onlinestu
:02 PM, Angel Perez wrote:
> Hello:
>
> All sip phones are 7961 with SIP41.8-4-1s loads (the one at br1 and the one
> at hq)
> br1 is a h323 gw registered to ucm
>
> gracias
>
> --
> Date: Fri, 26 Feb 2010 09:43:32 -0430
> Subject: Re
Hello:
All sip phones are 7961 with SIP41.8-4-1s loads (the one at br1 and the one at
hq)
br1 is a h323 gw registered to ucm
gracias
Date: Fri, 26 Feb 2010 09:43:32 -0430
Subject: Re: [OSL | CCIE_Voice] DTMF PROBLEM UNITY CON AND SIP PHONE
From: o...@ipexpert.com
To: gorr
Hi Angel,
What sip phone types are you using for br1 and hq sites?,
Thanks!!
On Fri, Feb 26, 2010 at 6:57 AM, Angel Perez wrote:
> Hello:
>
> I've the following issue:
>
> When I call uc from br1 sip phone the DTMF are getting distorted, I can
> call uc from the phone then the password is
Hello:
I've the following issue:
When I call uc from br1 sip phone the DTMF are getting distorted, I can call uc
from the phone then the password is asked, but then uc never gets the
correct password (I can see the Failed Logon Attempt at user page in UC are
increasing)
>From a s
20 matches
Mail list logo