set the CoS vlaues in vlan field. It is like, your voice
vlan id (in binary) + 12 zeros + 101 (CoS for voice) + 011 (CoS) for
signal. Always ends with 2B.
Regards,
Prabahar
CCIE Voice # 24316
> Date: Fri, 8 May 2009 13:45:20 -0400
> From: Scott ODonnell
> Subject: [OSL | CCIE_Voice] AT
check out this
http://cciev.wordpress.com/category/ata186/
Scott ODonnell wrote:
I'm trying to understand how the TOS field is used to adjust the markings on
the ATA for signaling and RTP packets.
Is anyone out there that understands this?
- Scott
--
Powe
I'm trying to understand how the TOS field is used to adjust the markings on
the ATA for signaling and RTP packets.Is anyone out there that understands
this?
- Scott
: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] ATA 186
Also, If the IP Address is statically set No DHCP without the TFTP address
correctly set. Or the address is statically set without a (or with an
incorrect) default gateway.
Brian
- Original Message -
From: rob
an SCCP load, you'll set it up like you do a phone, and it
will need option 150 for TFTP, etc.
- Original Message -
From: hasan khalife
To: ukcisco@googlemail.com
Cc: ccie_voice@onlinestudylist.com
Sent: Sunday, February 08, 2009 3:05 PM
Subject: Re: [OSL | CCIE_V
sorry i didnt get ur clue, can u plz guide me how to configure it from the
bigining?
i just register the connected port in the sw 6500 to the vlan and enable dhcp
,i miss some thing else?
Date: Sat, 7 Feb 2009 21:21:33 +Subject: Re: [OSL | CCIE_Voice] ATA
186From: ukcisco@googlem
: Saturday, February 07, 2009 4:21 PM
Subject: Re: [OSL | CCIE_Voice] ATA 186
If you connect to the web interface of the ATA is it in H323 mode? If so it
will never register!
On Sat, Feb 7, 2009 at 9:03 PM, hasan khalife
wrote:
HOW I CAN REGISTER THE ATA 186 IN THE CCM ,I CANT MANULAY
If you connect to the web interface of the ATA is it in H323 mode? If so it
will never register!
On Sat, Feb 7, 2009 at 9:03 PM, hasan khalife wrote:
> HOW I CAN REGISTER THE ATA 186 IN THE CCM ,I CANT MANULAY OR AUTO BY CCM
> WHY?
>
> ANY CLUE ?
>
> VLAN IS CORRECT ON ATA PORT[6500 SHARED SW],EV
HOW I CAN REGISTER THE ATA 186 IN THE CCM ,I CANT MANULAY OR AUTO BY CCM WHY?
ANY CLUE ?
VLAN IS CORRECT ON ATA PORT[6500 SHARED SW],EVEN THE DHCP IS ENABLE ON THE
SERVER ,JUST PHONES APPEAR AND GET IP
THANKS
_
More than mess