Hi Chris,
i configure the switchport for the ATA always as access-port. I would only
configure the switchport for dot1q if i am asked to explicitly.
/Robert
Chris Parkercpar...@cparker.us schrieb am Sonntag, 22. Februar 2009 um
14:48
in Nachricht b74096f513403f0e877b6a80074dcdb5:
Should
Robert is correct. the ATA 186 you should configure as an access port and
not dot1q. The ATA188 (which have a PC port) you would configure as a dot1q
port, but they are not on the lab.
Thank,
Ryan Trauernicht
CCIE Voice #23497
On Sun, Feb 22, 2009 at 8:53 AM, Robert Schuknecht
: OSL Group ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Antw: ATA186 dot1q ot not?
Robert is correct. the ATA 186 you should configure as an access port and
not dot1q. The ATA188 (which have a PC port) you would configure as a dot1q
port, but they are not on the lab.
Thank,
Ryan
.
*From: *Ryan Trauernicht ryanstudyvo...@gmail.com
*Date: *Sun, 22 Feb 2009 11:08:11 -0600
*To: *Robert Schuknecht rschukne...@gmx.de
*Cc: *OSL Group ccie_voice@onlinestudylist.com
*Subject: *Re: [OSL | CCIE_Voice] Antw: ATA186 dot1q ot not?
Robert is correct. the ATA 186 you should configure
Feb 2009 12:39:46 -0500
To: Vik Malhi vma...@ipexpert.com
Cc: Ryan Trauernicht ryanstudyvo...@gmail.com, Robert Schuknecht
rschukne...@gmx.de, OSL Group ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Antw: ATA186 dot1q ot not?
Vik,
If thats the case, I'd think it'd
] Antw: ATA186 dot1q ot not?
Vik,
If thats the case, I'd think it'd be preferable to use the dot1q voice
vlan because if you set the port as an access port, you must trust the
dscp and I believe the ATA does not use CS3 for signaling by default? I
think to have it use CS3 for signaling