hi All,
I really appreciate for any information to fix this problem.
I get a busy signal when I call 999 from a phone at site C.
I see a message " Cause i = 0x8291 - User busy" in the debug.
I have the same problem on two different racks. do I miss something in my
configure?
controller E1 1/0
pri-group timeslots 1-3,16
dial-peer voice 999 pots
destination-pattern 999
port 1/0:15
forward-digits 3
show isdn status is good
VORack09R3#sh isdn status
Global ISDN Switchtype = primary-net5
ISDN Serial1/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
below is the output from debug isdn q931.
VORack09R3#
Mar 22 12:10:49.121: ISDN Se1/0:15 Q931: Applying typeplan for sw-type 0x12 is 0
x0 0x1, Calling num 3003
Mar 22 12:10:49.121: ISDN Se1/0:15 Q931: Applying typeplan for sw-type 0x12 is 0
x0 0x1, Called num 999
Mar 22 12:10:49.125: ISDN Se1/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0081
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98383
Exclusive, Channel 3
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0180, '3003'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x81, '999'
Plan:ISDN, Type:Unknown
Mar 22 12:10:49.149: ISDN Se1/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x808
1
Channel ID i = 0xA98383
Exclusive, Channel 3
Mar 22 12:10:49.153: ISDN Se1/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x80
81
Cause i = 0x8291 - User busy
Mar 22 12:10:49.157: ISDN Se1/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x0081
Mar 22 12:10:49.165: ISDN Se1/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x
8081
--- On Sun, 3/22/09, ccie_voice-requ...@onlinestudylist.com
<ccie_voice-requ...@onlinestudylist.com> wrote:
> From: ccie_voice-requ...@onlinestudylist.com
> <ccie_voice-requ...@onlinestudylist.com>
> Subject: CCIE_Voice Digest, Vol 37, Issue 135
> To: ccie_voice@onlinestudylist.com
> Date: Sunday, March 22, 2009, 10:49 AM
> Send CCIE_Voice mailing list submissions to
> ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body
> 'help' to
> ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
> ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more
> specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
> 1. Re: VMware ESXi for CCM servers (WorkerBee)
> 2. Unity forwarding (jeffrey liujian)
> 3. srst+moh (Gughan Gug)
> 4. Re: Unity forwarding (saralilin2...@yahoo.co.jp)
> 5. Re: srst+moh (saralilin2...@yahoo.co.jp)
> 6. Re: Unity forwarding (jeffrey liujian)
> 7. Re: Unity forwarding (saralilin2...@yahoo.co.jp)
> 8. Re: CCIE_Voice Digest, Vol 37, Issue 133 (Bradley
> King)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 22 Mar 2009 19:34:40 +0800
> From: WorkerBee <cisco...@gmail.com>
> Subject: Re: [OSL | CCIE_Voice] VMware ESXi for CCM servers
> To: Arun Kumar <arunv...@gmail.com>
> Cc: "ccie_voice@onlinestudylist.com"
> <ccie_voice@onlinestudylist.com>
> Message-ID:
> <ec519e9a0903220434x31c7430cs2712c8a38db9c...@mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> How many virtual servers can u put in ESXi? There are quite
> a number
> of servers required for the new blueprint.
>
> On Sun, Mar 22, 2009 at 1:09 PM, Arun Kumar
> <arunv...@gmail.com> wrote:
> > during install select 73GB HDD and 2GB RAM after
> install you can reduce the
> > amount of memory.
> >
> > On Sun, Mar 22, 2009 at 3:03 AM, J Hogan
> <j.jho...@gmail.com> wrote:
> >>
> >> I managed to get it running on 40 gig and 512 mem
> of ram
> >>
> >> On 3/21/09, Duy Nguyen <ccieid...@gmail.com>
> wrote:
> >> > Make sure during the initial install that you
> allocate 74GB of hd and @
> >> > least 2GB of ram.
> >> >
> >> > On Sat, Mar 21, 2009 at 2:35 PM,
> <ccielab...@gmail.com> wrote:
> >> >
> >> >> Any tricks to getting CUCM 7 working on
> ESXi ? My install keeps failing
> >> >> .
> >> >> I haven't invested too much time yet,
> as I'm trying hard to pass with
> >> >> the
> >> >> current blueprint :)
> >> >>
> >> >>
> >> >>
> >> >> On Sat, Mar 21, 2009 at 1:15 PM, Arun
> Kumar <arunv...@gmail.com> wrote:
> >> >>
> >> >>> Hi
> >> >>>
> >> >>> I'm running CUCM 7 and Unity
> Connection 7 on ESXi with 6GB of RAM and
> >> >>> 500GB of HDD and it's working
> fine. Not tested on Linux.
> >> >>>
> >> >>> Thanks
> >> >>>
> >> >>>
> >> >>> On Sat, Mar 21, 2009 at 6:44 PM,
> WorkerBee <cisco...@gmail.com> wrote:
> >> >>>
> >> >>>> Anyone has tried using ESXi with
> Quad core/8G ram instead of using
> >> >>>> VMware server on a Linux?
> >> >>>>
> >> >>>> Does ESXi gives a better
> performance?
> >> >>>>
> >> >>>> Thanks.
> >> >>>>
> >> >>>
> >> >>>
> >> >>
> >> >
> >>
> >> --
> >> Sent from my mobile device
> >>
> >> J. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI
> >> Yahoo ID: jhogan552000
> >> AIM ID: jhogan55
> >> MSN ID: jhogan55
> >> ICQ ID: 257599283
> >>
> >> Live Life And Do Not Kill Time.
> >
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 22 Mar 2009 06:04:17 -0700 (PDT)
> From: jeffrey liujian <jeffrey_liuj...@yahoo.com>
> Subject: [OSL | CCIE_Voice] Unity forwarding
> To: Voice CCIE <ccie_voice@onlinestudylist.com>
> Message-ID:
> <915691.79397...@web56306.mail.re3.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
>
>
> Hi all,
>
> I dial hq 1001, it no answer or busy to unity and how can I
> configure unity so it can forward to hq pstn number?
> No AA in unity, but I found all call transfer in unity are
> refer to AA.
> Anyone can help me? Thanks.
>
>
> Jeffrey
>
>
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 22 Mar 2009 18:36:47 +0530 (IST)
> From: Gughan Gug <gughan...@yahoo.in>
> Subject: [OSL | CCIE_Voice] srst+moh
> To: ccie_voice@onlinestudylist.com
> Message-ID:
> <8630.86552...@web95103.mail.in2.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi,
>
> I have configured the srst router as moh source and it is
> perfectly working? for pstn calls during normal operation,
> but the other ip ip?phone in the brach?calls it hears dead
> air. Am i missing anything in the config.
>
> Also, when an hq phone call to branch ?phone and put on
> hold,? audio source from callmanager is played. In the
> performance monitor I can see MOHUnicast resource active as
> one. Is it a normal behaviour.
>
> I have? enabled ip multicas-routing and ip pim dense-mode
> in hq router
>
>
> Regards,
> Gug
>
>
> Add more friends to your messenger and enjoy! Go to
> http://messenger.yahoo.com/invite/
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/dd35a15b/attachment-0001.htm
>
>
> ------------------------------
>
> Message: 4
> Date: Sun, 22 Mar 2009 22:30:30 +0900 (JST)
> From: saralilin2...@yahoo.co.jp
> Subject: Re: [OSL | CCIE_Voice] Unity forwarding
> To: liujian jeffrey <jeffrey_liuj...@yahoo.com>, CCIE
> Voice
> <ccie_voice@onlinestudylist.com>
> Message-ID:
> <20090322133030.43010.qm...@web2901.mail.tnz.yahoo.co.jp>
> Content-Type: text/plain; charset="us-ascii"
>
> call transfer to subscriber then select ring this number,
> -> input the number 91234567 remember to add call
> retriction table to allow this string.
>
>
> jeffrey liujian <jeffrey_liuj...@yahoo.com> wrote:
>
>
> Hi all,
>
> I dial hq 1001, it no answer or busy to unity and how can I
> configure unity so it can forward to hq pstn number?
> No AA in unity, but I found all call transfer in unity are
> refer to AA.
> Anyone can help me? Thanks.
>
>
> Jeffrey
>
> --------------------------------------
> Power up the Internet with Yahoo! Toolbar.
> http://pr.mail.yahoo.co.jp/toolbar/
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/9ad72597/attachment-0001.htm
>
>
> ------------------------------
>
> Message: 5
> Date: Sun, 22 Mar 2009 22:34:16 +0900 (JST)
> From: saralilin2...@yahoo.co.jp
> Subject: Re: [OSL | CCIE_Voice] srst+moh
> To: Gug Gughan <gughan...@yahoo.in>,
> ccie_voice@onlinestudylist.com
> Message-ID:
> <638570.45593...@web2904.mail.tnz.yahoo.co.jp>
> Content-Type: text/plain; charset="us-ascii"
>
> srst moh is only for pstn call not for ip phone to ip
> phone.
>
>
>
> Gughan Gug <gughan...@yahoo.in> wrote:
>
>
>
>
> Hi,
>
>
> I have configured the srst router as moh source and it is
> perfectly working for pstn calls during normal operation,
> but the other ip ip phone in the brach calls it hears dead
> air. Am i missing anything in the config.
>
>
> Also, when an hq phone call to branch phone and put on
> hold, audio source from callmanager is played. In the
> performance monitor I can see MOHUnicast resource active as
> one. Is it a normal behaviour.
>
>
> I have enabled ip multicas-routing and ip pim dense-mode
> in hq router
>
>
>
>
> Regards,
> Gug
> Add more friends to your messenger and enjoy! Invite them
> now.
>
> --------------------------------------
> Power up the Internet with Yahoo! Toolbar.
> http://pr.mail.yahoo.co.jp/toolbar/
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/d22f0947/attachment-0001.htm
>
>
> ------------------------------
>
> Message: 6
> Date: Sun, 22 Mar 2009 06:40:11 -0700 (PDT)
> From: jeffrey liujian <jeffrey_liuj...@yahoo.com>
> Subject: Re: [OSL | CCIE_Voice] Unity forwarding
> To: saralilin2...@yahoo.co.jp, Voice CCIE
> <ccie_voice@onlinestudylist.com>
> Message-ID:
> <545375.70556...@web56303.mail.re3.yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi Sara,
>
> Thanks for your reply, It can't forward to pstn
> directly, no input or menu permitted.
>
>
>
>
>
> ________________________________
> From: "saralilin2...@yahoo.co.jp"
> <saralilin2...@yahoo.co.jp>
> To: liujian jeffrey <jeffrey_liuj...@yahoo.com>; CCIE
> Voice <ccie_voice@onlinestudylist.com>
> Sent: Monday, March 23, 2009 12:30:30 AM
> Subject: Re: [OSL | CCIE_Voice] Unity forwarding
>
> call transfer to subscriber then select ring this number,
> -> input the number 91234567 remember to add call
> retriction table to allow this string.
>
>
> jeffrey liujian <jeffrey_liuj...@yahoo.com> wrote:
>
>
> Hi all,
>
> I dial hq 1001, it no answer or busy to unity and how can I
> configure unity so it can forward to hq pstn number?
> No AA in unity, but I found all call transfer in unity are
> refer to AA.
> Anyone can help me? Thanks.
>
>
> Jeffrey
>
>
>
>
>
> ________________________________
> Power up the Internet with Yahoo! Toolbar.
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/a071b011/attachment-0001.htm
>
>
> ------------------------------
>
> Message: 7
> Date: Sun, 22 Mar 2009 22:48:19 +0900 (JST)
> From: saralilin2...@yahoo.co.jp
> Subject: Re: [OSL | CCIE_Voice] Unity forwarding
> To: liujian jeffrey <jeffrey_liuj...@yahoo.com>, CCIE
> Voice
> <ccie_voice@onlinestudylist.com>
> Message-ID:
> <20090322134819.36611.qm...@web2914.mail.tnz.yahoo.co.jp>
> Content-Type: text/plain; charset="us-ascii"
>
> your voice mail port got to have css for pstn call.
>
>
> jeffrey liujian <jeffrey_liuj...@yahoo.com> wrote:
>
>
>
>
> Hi Sara,
>
> Thanks for your reply, It can't forward to pstn
> directly, no input or menu permitted.
>
>
>
>
>
> From: "saralilin2...@yahoo.co.jp"
> <saralilin2...@yahoo.co.jp>
> To: liujian jeffrey <jeffrey_liuj...@yahoo.com>; CCIE
> Voice <ccie_voice@onlinestudylist.com>
> Sent: Monday, March 23, 2009 12:30:30 AM
> Subject: Re: [OSL | CCIE_Voice] Unity forwarding
>
> call transfer to subscriber then select ring this number,
> -> input the number 91234567 remember to add call
> retriction table to allow this string.
>
>
> jeffrey liujian <jeffrey_liuj...@yahoo.com> wrote:
>
>
> Hi all,
>
> I dial hq 1001, it no answer or busy to unity and how can I
> configure unity so it can forward to hq pstn number?
> No AA in unity, but I found all call transfer in unity are
> refer to AA.
> Anyone can help me? Thanks.
>
>
> Jeffrey
>
>
>
>
>
> Power up the Internet with Yahoo! Toolbar.
>
> --------------------------------------
> Power up the Internet with Yahoo! Toolbar.
> http://pr.mail.yahoo.co.jp/toolbar/
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/3238a07b/attachment-0001.htm
>
>
> ------------------------------
>
> Message: 8
> Date: Sun, 22 Mar 2009 09:57:21 -0400
> From: Bradley King <collinsda...@gmail.com>
> Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 37,
> Issue 133
> To: ccie_voice@onlinestudylist.com
> Message-ID:
> <8a2c4f8b0903220657s4a24c2a1u930f1d10331f2...@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I normally put HQ with unlimited voice, and BR1 with the
> restriction on 24K.
> I always takes the bandwidth away from both locations.
> That way only one
> call will ever go through to BR1, but that will not affect
> the calls coming
> from BR2 via GK. If asked you could always limit calls to
> BR2 with another
> location, or if it requires you to use GK CAC. Hope this
> helps
>
> On Sun, Mar 22, 2009 at 8:04 AM,
> <ccie_voice-requ...@onlinestudylist.com>wrote:
>
> > Send CCIE_Voice mailing list submissions to
> > ccie_voice@onlinestudylist.com
> >
> > To subscribe or unsubscribe via the World Wide Web,
> visit
> >
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
> > or, via email, send a message with subject or body
> 'help' to
> > ccie_voice-requ...@onlinestudylist.com
> >
> > You can reach the person managing the list at
> > ccie_voice-ow...@onlinestudylist.com
> >
> > When replying, please edit your Subject line so it is
> more specific
> > than "Re: Contents of CCIE_Voice digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Location issue (Allan Ren)
> > 2. Re: Location issue (Cliff McGlamry)
> > 3. Re: VMware ESXi for CCM servers (Arun Kumar)
> > 4. Re: Location issue (Allan Ren)
> > 5. Re: Location issue (Wesley Lim)
> >
> >
> >
> ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Sun, 22 Mar 2009 10:43:48 +1100
> > From: "Allan Ren" <rxlm...@gmail.com>
> > Subject: [OSL | CCIE_Voice] Location issue
> > To: <ccie_voice@onlinestudylist.com>
> > Message-ID:
> <000301c9aa7e$e50c9ca0$af25d5...@com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Dear all,
> >
> >
> >
> > I'd like to put restriction between HQ and BR1
> that just allow 1 g729 call
> > over WAN. So I create a location named HQ and put all
> HQ phones under this
> > location. Then I put 24k on audio bandwidth. It works
> on HQ-BR1 connection.
> > But it impacts BR2-HQ connection as well. Just 1 call
> can reach HQ phones
> > via GK from BR2.
> >
> >
> >
> > Anyone has solution can just limit this 1 call
> restriction over HQ-BR1
> > only?
> > Any responding would be appreciated J
> >
> >
> >
> > Cheers,
> >
> > Allan
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/8ceaccef/attachment-0001.htm
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Sat, 21 Mar 2009 19:47:38 -0400
> > From: "Cliff McGlamry"
> <cl...@mcglamry.net>
> > Subject: Re: [OSL | CCIE_Voice] Location issue
> > To: "Allan Ren" <rxlm...@gmail.com>,
> <ccie_voice@onlinestudylist.com>
> > Message-ID:
> <026201c9aa7f$6d52c800$0428f...@forsythe.com>
> > Content-Type: text/plain;
> charset="iso-8859-1"
> >
> > If BR2 - HQ connections are affected then you have
> somehow tied BR1 and
> > BR2. Did you create a trunk to BR2 and assign the
> location to BR1perhaps?
> > That's what it sounds like. I leave my trunks to
> BR2 in the HQ location.
> > Normally bandwidth restrictions to BR2 are gatekeeper
> bandwidth controlled.
> >
> > Cliff
> >
> > ----- Original Message -----
> > From: Allan Ren
> > To: ccie_voice@onlinestudylist.com
> > Sent: Saturday, March 21, 2009 7:43 PM
> > Subject: [OSL | CCIE_Voice] Location issue
> >
> >
> > Dear all,
> >
> >
> >
> > I'd like to put restriction between HQ and BR1
> that just allow 1 g729
> > call over WAN. So I create a location named HQ and put
> all HQ phones under
> > this location. Then I put 24k on audio bandwidth. It
> works on HQ-BR1
> > connection. But it impacts BR2-HQ connection as well.
> Just 1 call can reach
> > HQ phones via GK from BR2.
> >
> >
> >
> > Anyone has solution can just limit this 1 call
> restriction over HQ-BR1
> > only? Any responding would be appreciated J
> >
> >
> >
> > Cheers,
> >
> > Allan
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090321/0d0c892b/attachment-0001.htm
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Sun, 22 Mar 2009 10:39:35 +0530
> > From: Arun Kumar <arunv...@gmail.com>
> > Subject: Re: [OSL | CCIE_Voice] VMware ESXi for CCM
> servers
> > To: J Hogan <j.jho...@gmail.com>
> > Cc: "ccie_voice@onlinestudylist.com"
> <ccie_voice@onlinestudylist.com>
> > Message-ID:
> >
> <a70a109b0903212209k1746012ay85bda571f38d8...@mail.gmail.com>
> > Content-Type: text/plain;
> charset="iso-8859-1"
> >
> > during install select 73GB HDD and 2GB RAM after
> install you can reduce the
> > amount of memory.
> >
> > On Sun, Mar 22, 2009 at 3:03 AM, J Hogan
> <j.jho...@gmail.com> wrote:
> >
> > > I managed to get it running on 40 gig and 512 mem
> of ram
> > >
> > > On 3/21/09, Duy Nguyen
> <ccieid...@gmail.com> wrote:
> > > > Make sure during the initial install that
> you allocate 74GB of hd and @
> > > > least 2GB of ram.
> > > >
> > > > On Sat, Mar 21, 2009 at 2:35 PM,
> <ccielab...@gmail.com> wrote:
> > > >
> > > >> Any tricks to getting CUCM 7 working on
> ESXi ? My install keeps
> > failing
> > > .
> > > >> I haven't invested too much time
> yet, as I'm trying hard to pass with
> > > the
> > > >> current blueprint :)
> > > >>
> > > >>
> > > >>
> > > >> On Sat, Mar 21, 2009 at 1:15 PM, Arun
> Kumar <arunv...@gmail.com>
> > wrote:
> > > >>
> > > >>> Hi
> > > >>>
> > > >>> I'm running CUCM 7 and Unity
> Connection 7 on ESXi with 6GB of RAM and
> > > >>> 500GB of HDD and it's working
> fine. Not tested on Linux.
> > > >>>
> > > >>> Thanks
> > > >>>
> > > >>>
> > > >>> On Sat, Mar 21, 2009 at 6:44 PM,
> WorkerBee <cisco...@gmail.com>
> > wrote:
> > > >>>
> > > >>>> Anyone has tried using ESXi with
> Quad core/8G ram instead of using
> > > >>>> VMware server on a Linux?
> > > >>>>
> > > >>>> Does ESXi gives a better
> performance?
> > > >>>>
> > > >>>> Thanks.
> > > >>>>
> > > >>>
> > > >>>
> > > >>
> > > >
> > >
> > > --
> > > Sent from my mobile device
> > >
> > > J. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI
> > > Yahoo ID: jhogan552000
> > > AIM ID: jhogan55
> > > MSN ID: jhogan55
> > > ICQ ID: 257599283
> > >
> > > Live Life And Do Not Kill Time.
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/b0f55c28/attachment-0001.htm
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Sun, 22 Mar 2009 19:07:40 +1100
> > From: "Allan Ren" <rxlm...@gmail.com>
> > Subject: Re: [OSL | CCIE_Voice] Location issue
> > To: "'Cliff McGlamry'"
> <cl...@mcglamry.net>,
> > <ccie_voice@onlinestudylist.com>
> > Message-ID:
> <000601c9aac5$48020160$d80604...@com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Hi Cliff,
> >
> >
> >
> > Thank you for responding. I created 3 separate
> location for HQ, BR1, and
> > Trunk. Just HQ location is limited to 24K and two
> rests are unlimited. The
> > problem is if a call connection between BR2 and HQ was
> created first, the
> > BR1 phones can't call HQ phone. It prompt "no
> enough bandwidth". Probably I
> > need to redesign the location to meet the question
> requirement.
> >
> >
> >
> > Thanks again,
> >
> > Allan
> >
> >
> >
> > From: Cliff McGlamry [mailto:cl...@mcglamry.net]
> > Sent: Sunday, 22 March 2009 10:48 AM
> > To: Allan Ren; ccie_voice@onlinestudylist.com
> > Subject: Re: [OSL | CCIE_Voice] Location issue
> >
> >
> >
> > If BR2 - HQ connections are affected then you have
> somehow tied BR1 and
> > BR2.
> > Did you create a trunk to BR2 and assign the location
> to BR1perhaps?
> > That's
> > what it sounds like. I leave my trunks to BR2 in the
> HQ location.
> > Normally
> > bandwidth restrictions to BR2 are gatekeeper bandwidth
> controlled.
> >
> >
> >
> > Cliff
> >
> >
> >
> > ----- Original Message -----
> >
> > From: Allan Ren <mailto:rxlm...@gmail.com>
> >
> > To: ccie_voice@onlinestudylist.com
> >
> > Sent: Saturday, March 21, 2009 7:43 PM
> >
> > Subject: [OSL | CCIE_Voice] Location issue
> >
> >
> >
> > Dear all,
> >
> >
> >
> > I'd like to put restriction between HQ and BR1
> that just allow 1 g729 call
> > over WAN. So I create a location named HQ and put all
> HQ phones under this
> > location. Then I put 24k on audio bandwidth. It works
> on HQ-BR1 connection.
> > But it impacts BR2-HQ connection as well. Just 1 call
> can reach HQ phones
> > via GK from BR2.
> >
> >
> >
> > Anyone has solution can just limit this 1 call
> restriction over HQ-BR1
> > only?
> > Any responding would be appreciated J
> >
> >
> >
> > Cheers,
> >
> > Allan
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/dd70ed1d/attachment-0001.htm
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Sun, 22 Mar 2009 19:12:03 +0800
> > From: Wesley Lim <lim.wes...@gmail.com>
> > Subject: Re: [OSL | CCIE_Voice] Location issue
> > To: Allan Ren <rxlm...@gmail.com>
> > Cc: ccie_voice@onlinestudylist.com
> > Message-ID:
> >
> <ca787c6a0903220412v1be2938dq2df465c45b4f8...@mail.gmail.com>
> > Content-Type: text/plain;
> charset="windows-1252"
> >
> > Arent u suppose to set HQ location's bandwidth to
> unlimited?
> >
> > On Sun, Mar 22, 2009 at 4:07 PM, Allan Ren
> <rxlm...@gmail.com> wrote:
> >
> > > Hi Cliff,
> > >
> > >
> > >
> > > Thank you for responding. I created 3 separate
> location for HQ, BR1, and
> > > Trunk. Just HQ location is limited to 24K and two
> rests are unlimited.
> > The
> > > problem is if a call connection between BR2 and
> HQ was created first, the
> > > BR1 phones can?t call HQ phone. It prompt ?no
> enough bandwidth?. Probably
> > I
> > > need to redesign the location to meet the
> question requirement.
> > >
> > >
> > >
> > > Thanks again,
> > >
> > > Allan
> > >
> > >
> > >
> > > *From:* Cliff McGlamry
> [mailto:cl...@mcglamry.net]
> > > *Sent:* Sunday, 22 March 2009 10:48 AM
> > > *To:* Allan Ren; ccie_voice@onlinestudylist.com
> > > *Subject:* Re: [OSL | CCIE_Voice] Location issue
> > >
> > >
> > >
> > > If BR2 - HQ connections are affected then you
> have somehow tied BR1 and
> > > BR2. Did you create a trunk to BR2 and assign
> the location to
> > BR1perhaps?
> > > That's what it sounds like. I leave my
> trunks to BR2 in the HQ location.
> > > Normally bandwidth restrictions to BR2 are
> gatekeeper bandwidth
> > controlled.
> > >
> > >
> > >
> > >
> > > Cliff
> > >
> > >
> > >
> > > ----- Original Message -----
> > >
> > > *From:* Allan Ren <rxlm...@gmail.com>
> > >
> > > *To:* ccie_voice@onlinestudylist.com
> > >
> > > *Sent:* Saturday, March 21, 2009 7:43 PM
> > >
> > > *Subject:* [OSL | CCIE_Voice] Location issue
> > >
> > >
> > >
> > > Dear all,
> > >
> > >
> > >
> > > I?d like to put restriction between HQ and BR1
> that just allow 1 g729
> > call
> > > over WAN. So I create a location named HQ and put
> all HQ phones under
> > this
> > > location. Then I put 24k on audio bandwidth. It
> works on HQ-BR1
> > connection.
> > > But it impacts BR2-HQ connection as well. Just 1
> call can reach HQ phones
> > > via GK from BR2.
> > >
> > >
> > >
> > > Anyone has solution can just limit this 1 call
> restriction over HQ-BR1
> > > only? Any responding would be appreciated J
> > >
> > >
> > >
> > > Cheers,
> > >
> > > Allan
> > >
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/6d65e968/attachment.htm
> >
> > ------------------------------
> >
> > _______________________________________________
> > CCIE_Voice mailing list
> > CCIE_Voice@onlinestudylist.com
> > http://onlinestudylist.com/mailman/listinfo/ccie_voice
> >
> >
> > End of CCIE_Voice Digest, Vol 37, Issue 133
> > *******************************************
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/0ce490fe/attachment.htm
>
>
> ------------------------------
>
> _______________________________________________
> CCIE_Voice mailing list
> CCIE_Voice@onlinestudylist.com
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
>
>
> End of CCIE_Voice Digest, Vol 37, Issue 135
> *******************************************
