Hi Kobel,
Is there any document for how to configure the CUP Publish trunk method?
I could understand from the posts that we still need to create a SIP trunk,
configure it in the CUP Publish service parameter field, and assign each user
to a line appearence
Anyway, if the CUCM
Hi,
I'm not aware of any document describing this explicitly. This is the only
document I know:
I missed one question of yours - CUCM PUBLISH trunk is also configured in
CUPS (presence - settings). There you can check the checkbox to enable
PUBLISH method and select on of the SIP trunk on CUCM which should be used
for this purpose. This also changes the CCM service paramter for CCM via
AXL.
I undestand, that these are two methods to achieve the same. But PUBLISH is
recommended by Cisco for integrations with CUCM 7.x and higher because of
performance reasons. Additionally, it's less cumbersome to configure (no
Subscribe CSS needed, no SIP security profile modification) - that's an
integration with CUCM - PUBLISH
vs. SUBSCRIBE
To: Moataz Mamdouh moataz_m...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Date: Friday, June 18, 2010, 8:14 AM
I undestand, that these are two methods to achieve the same. But PUBLISH is
recommended by Cisco for integrations with CUCM 7.x
, kobel findko...@gmail.com* wrote:
From: kobel findko...@gmail.com
Subject: Re: [OSL | CCIE_Voice] CUPS presence integration with CUCM -
PUBLISH vs. SUBSCRIBE
To: Moataz Mamdouh moataz_m...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Date: Friday, June 18, 2010, 8:14 AM
I undestand
Dear fellow CCIE wannabies,
I was wondering what are your experiences with integrating CUPS with CUCM.
AFAIK, there are two methods:
* SUBSCRIBE - has to be used with CUCM releases = 6.x (requires SIP trunk
with correct SIP sec profile)
* PUBLISH - can be used with 7.x and later (PUBLISH trunk
One more thing - I know I wrote Cisco documentation recommends, but we all
know the CUPS documentation... For me it looks like it has not been updated
after PUBLISH method became available with 7.x.
In one place there is information that PUBLISH is supported/recommended with
CUCM 7.x, but on the
...at least one person tends to agree ;)
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg09296.html
On Thu, Jun 17, 2010 at 9:02 PM, kobel findko...@gmail.com wrote:
One more thing - I know I wrote Cisco documentation recommends, but we
all know the CUPS documentation... For me
