Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

You have to disable Single button barge then you'll get the softkey to Cbarge when you press the shared line button. If you leave it at barge then of course it will try to barge which is not what you want since you have Cbarge on the softkey template which you'd like to show up when you press the s

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Hi All , here is my observation 1st case on branch phone Hardware conf bridge resource is applied to phone config page built in bridge off Privacy off single barge set to "Cbarge" Cbarge works in CUCM but not in SRST Hardware Conf bridge is invoked so Cbarge works fine. In CME SRST Cbarge is

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Yes Randall is right. Look at this link I posted earlier http://onlinestudylist.com/archives/ccie_voice/2011-January/072144.html Thanks Shrini On 3/30/2011 8:05 AM, Randall Saborio wrote: This is a job for the good old OSL archive search. You can go here: http://www.onlinestudylist.com/mailm

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Mark Holloway has given you the answer. Don't use Single button Barge Cbarge, configure Cbarge on the Softkey Template and apply to the phones in the branch falling into SRST. Single Button Barge Cbarge will mess Cbarge on SRST On 29 March 2011 21:21, Rahul Kapor wrote: > Hi Adam, > DSP are regi

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

This is a job for the good old OSL archive search. You can go here: http://www.onlinestudylist.com/mailman/listinfo/ccie_voice And do a search for like "cbarge srst". You will notice many people have posted about the same problem. If you

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Hi Adam, DSP are registered fine. when shared button is pressed button , it is initiating a new call as if privacy is on but privacy is off under each phone ! thx, Rahul On Tue, Mar 29, 2011 at 9:38 PM, adam compton wrote: > Do you see the CBarge softkey but the conference gives you a busy sign

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Usually this is because you are using Single Button Cbarge on CUCM which breaks Cbarge in SRST. It's a known issue. Use standard Cbarge in CUCM and it should work in SRST. On Mar 29, 2011, at 9:08 AM, adam compton wrote: > Do you see the CBarge softkey but the conference gives you a busy sign

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Do you see the CBarge softkey but the conference gives you a busy signal? or is it that CBarge doesn't show up at all? One thing I can think is to make sure the dspfarm is registered to the correct SCCP ccm group. in a SRST scenario, you would probably need a sccp ccm group for call manager and o

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Hi Roger , I added soft key template no help. Hi Bo type cannot be added because mac address is not specified ephone config is ephone 1 privacy off Can body send me working config for CBarge in SRST ? thx, Rahul On Tue, Mar 29, 2011 at 12:36 PM, Rogers Ochieng wrote: > Add > > ephone-template

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Add ephone-template 1 softkeys remote-in-use Cbarge NewCall And also no huntstop on the conference ephone-dn On 28 March 2011 19:01, Rahul Kapor wrote: > Hi all , > > Cbarge in SRST not working > > here is my config > > ephone-dn-template 1 > call-forward busy 914082026002 > call-forward

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Hi, You might want to add ephone type under the ephone. Hope it helps, Bo On Mon, Mar 28, 2011 at 9:01 AM, Rahul Kapor wrote: > Hi all , > > Cbarge in SRST not working > > here is my config > > ephone-dn-template 1 > call-forward busy 914082026002 > call-forward noan 914082026002 timeout 3

Re: [OSL | CCIE_Voice] Cbarge in SRST nt working !

Rahul: You may need a 'no huntstop' under your ephone-dn 10 Example: ephone-dn 5 octo-linec number 4300 no-reg primary conference ad-hoc no huntstop If that does not work do a 'sh sccp' and post that output. On Mon, Mar 28, 2011 at 10:01 AM, Rahul Kapor wrote: > Hi all , > > Cbarge in SRST

[OSL | CCIE_Voice] Cbarge in SRST nt working !

Hi all , Cbarge in SRST not working here is my config ephone-dn-template 1 call-forward busy 914082026002 call-forward noan 914082026002 timeout 3 ephone-template 1 softkeys idle Redial Newcall Cfwdall ephone-dn 10 octo-line number conference ad-hoc ephone 1 privacy off device-