See below post for resolution of Greg's problem. Vik Malhi - CCIE #13890 Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. _____ From: Vik Malhi [mailto:[EMAIL PROTECTED] Sent: Friday, May 23, 2008 10:34 PM To: 'Gregory Jost (grjost)' Subject: RE: CME with BACD & GK bandwidth total on the gk. any call going to a voip dial-peer needs bandwidth permission from the gk- since you are using g711 the gw will request 128k (EVEN THOUGH THE LOOPBACK interface is on the same router, the gk doesn't know that). If you use bandwidth restriction within the zone (eg bandwidth total) then the call will fail. See the RAS messaging (deb h225 asn1) and you will see an ARJ come back. Vik Malhi - CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. _____ From: Gregory Jost (grjost) [mailto:[EMAIL PROTECTED] Sent: Friday, May 23, 2008 7:16 PM To: ccievoice; Mark Snow; [EMAIL PROTECTED]; Greg Miglucci (gmiglucc) Subject: CME with BACD & GK When my gateway registers with the gatekeeper, CME phones get fast busy and "Unknown Number" when calling AA pilot. As soon as you enter "no gateway", it starts working. It works fine as long as the gateway isn't registered with the gatekeeper. Any ideas? IOS version: c2800nm-adventerprisek9_ivs-mz.124-3g.bin 512MB BACD config ======================================= application service queue flash:app-b-acd-2.1.0.0.tcl param queue-len 15 param aa-hunt3 53003 param queue-manager-debugs 1 param number-of-hunt-grps 2 param aa-hunt2 3210 ! service aa flash:app-b-acd-aa-2.1.0.0.tcl paramspace english index 1 param number-of-hunt-grps 2 param handoff-string aa param dial-by-extension-option 1 paramspace english language en param max-time-vm-retry 2 param aa-pilot 3500 paramspace english location flash: param second-greeting-time 60 param call-retry-timer 5 param voice-mail 53003 param max-time-call-retry 90 param service-name queue ! dial-peer voice 3500 voip service aa destination-pattern 3500 session target ipv4:10.1.202.1 incoming called-number 3500 dtmf-relay h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 3501 pots service aa incoming called-number 3500 GW/GK config ======================================= interface Loopback0 ip address 172.1.102.1 255.255.255.255 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip id CCM ipaddr 172.1.100.1 1719 h323-gateway voip h323-id CME h323-gateway voip tech-prefix 1# ! num-exp 1...$ 1#1... num-exp 2...$ 1#2... num-exp 1#3... 3... ! dial-peer voice 1000 voip destination-pattern 1#1...$ session target ras dtmf-relay h245-alphanumeric ! dial-peer voice 2000 voip destination-pattern 1#2...$ session target ras dtmf-relay h245-alphanumeric ! dial-peer voice 1001 pots preference 1 destination-pattern 1#1...$ port 0/0/0:15 prefix 0012122211 ! dial-peer voice 2001 pots preference 1 destination-pattern 1#2...$ port 0/0/0:15 prefix 0016175212 Greg Jost Network Consulting Engineer Unified Communications Practice Cisco Systems, Inc. 214-274-1922
