HI I am working on WB 2 lab 7 question 2.4
How do I change the called number on the phone calling from an mgcp gw or h323
gw?
I looked at PG and it said to change the display on the calling phone upi need
to manipulate in the RP. I have added XX in the called party trasnform.
I and
whenever you do digit manipulation at the Gateway level or the Route List
(RG) level
the digit manipulation that you do on the route pattern is only going to
affect the display on the phone
on H323 gateway just make sure that you disable the supplementary-services
h225 cid-update
and you should
I was messing around with Called party transformations today on MGCP
gateways and I noticed some different behavior than I thought would happen.
If I use Called Party Transformation for manipulating digits and RP for the
display of the phone, the RP settings change the phone display while the
...@gmail.com
Cc: Randall Crumm rrcr...@yahoo.com; ccie vo...@onlinestudylist.com
ccie_voice@onlinestudylist.com
Sent: Sunday, May 22, 2011 5:09 PM
Subject: Re: [OSL | CCIE_Voice] How to change the Dialing display --rc
I was messing around with Called party transformations today on MGCP gateways
and I
no, i don't think that'd be an expected behavior
it's been so long since the last time i indeed tried it. that i don't
remember
but i remember that the calling name was the same during the ringing and
active state
2011/5/22 adam compton com...@gmail.com
I was messing around with Called party
