bind interface lo0
took care of it every time.
Randall
From: Bill Lake [mailto:whl...@gmail.com]
Sent: Tuesday, March 29, 2011 5:09 PM
To: Randall Crumm
Cc: Hough, Earl; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] I can't get MGCP to register to lo0
Did Earl's
w the updated loopback
> address of the MGCP gateway.
>
>
>
>
>
> Earl Hough
>
> CCIE #16508 (R&S/Security/Voice)
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Randall Crumm
>
it should show the updated loopback
> address of the MGCP gateway.
>
>
>
>
>
> Earl Hough
>
> CCIE #16508 (R&S/Security/Voice)
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Randall C
dylist.com
Subject: [OSL | CCIE_Voice] I can't get MGCP to register to lo0
I've tried everything at least 4 times now.
No mgcp bind control
No mgcp bind media
No isdn bind-l3 ccm
Rebooting the rtr
Deleteing the gw in CUCM
CUCM always will not see the lo0 ip address.
At this po
gt; Name: x"
>
>
> Earl Hough
> CCIE #16508 (R&S/Security/Voice)
>
>
> -Original Message-
> From: Brian Mulgrew [mailto:btmulg...@gmail.com]
> Sent: Sunday, March 27, 2011 2:28 PM
> To: Hough, Earl; Randall Crumm; ccie_voice@onlinestudylist.com
h, Earl; Randall Crumm; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] I can't get MGCP to register to lo0
Hi - Is DNS being used? May need the fqdn of the gateway.
Hth
Brian
On 27/03/2011, Hough, Earl wrote:
> Randal,
>
> It should work if you just do these 4 steps:
>
>
#16508 (R&S/Security/Voice)
>
> From: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm
> Sent: Sunday, March 27, 2011 12:54 PM
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] I can't get MGCP to
estudylist.com
Subject: [OSL | CCIE_Voice] I can't get MGCP to register to lo0
I've tried everything at least 4 times now.
No mgcp bind control
No mgcp bind media
No isdn bind-l3 ccm
Rebooting the rtr
Deleteing the gw in CUCM
CUCM always will not see the lo0 ip address.
At this p
I've tried everything at least 4 times now.
No mgcp bind control
No mgcp bind media
No isdn bind-l3 ccm
Rebooting the rtr
Deleteing the gw in CUCM
CUCM always will not see the lo0 ip address.
At this point anything is welcome...
UGGG!
Best Regards,
Randall Crumm
Voice and V
