Does the GW shaw as registered in CM?
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Fri, May 22, 2009 at 6:35 AM, ABIOLA ADEFILA wrote:
> Global ISDN Switchtype = primary-net5
>
> %Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. La
Global ISDN Switchtype = primary-net5
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not
apply
ISDN Serial0/2/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
L2 Protocol = Q.921 0x L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
e agent (Jonathan Charles)
--
Message: 1
Date: Wed, 3 Sep 2008 13:17:40 -0500
From: "Jonathan Charles" <[EMAIL PROTECTED]>
Subject: Re: [OSL | CCIE_Voice] ISDN STATUS
To: "Paul and Bobs" <[EMAIL PROTECTED]>
Cc: ccie_voice@onlinestudylist.com
Message
Jonathan is right, no calls should be active in TEI_ASSIGNED Status, could
you pls confirm that the call are not working through backup, another
gateway in the same Route-Group, or Route List with other Route Groups.
//r.a.
On Wed, Sep 3, 2008 at 5:07 PM, Paul and Bobs <[EMAIL PROTECTED]> wrote:
Can anyone please confirm this. I have calls working over 2 ISDN links where
one is coming up as TEI_ASSIGNED and the other is
MULTIPLE_FRAME_ESTABLISHED. I have had both of them working in the past on
TEI_ASSIGNED.
Thansk
On Thu, Sep 4, 2008 at 4:17 AM, Jonathan Charles <[EMAIL PROTECTED]> wro
You should not be able to call if layer 2 says TEI ASSIGNED...
Multiple Frame Established means the D channel is up
anything else means the D channel is down... how the calls work, I couldn't
tell you.
Jonathan
On Wed, Sep 3, 2008 at 12:15 AM, Paul and Bobs <[EMAIL PROTECTED]>wrote:
> Hi
>
>
Hi
I am working on the ISDN interfaces. ON BR1 , when the serial interface is
up and the ser0/1/0:15 is bound to CCM i get MULTIPLE_FRAME_ESTABLISHED on
the link. ON other links I get TEI_ASSIGNED. What is the difference between
these as I can call through both states.
Paul
