If nothing specific is required for traffic from/to the phones, I would not do anything there. Run the auto qos on an unused port.
Thanks, /Baktha > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 22 Feb 2012 02:13:29 -0800 (PST) > From: Vega Wong <vega2...@yahoo.com.au> > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] LAN QoS > Message-ID: > <1329905609.25199.yahoomailclas...@web65905.mail.ac4.yahoo.com> > Content-Type: text/plain; charset="utf-8" > > Hi all > > Just want to get some advise regarding LAN QoS. > > Let say if the question ask to apply priority queue and specify certain > drop % based on a COS value to the interface that connect to the router. > What would you do with the interface that connecting to the phone? > > The reason I asked is because if auto-qos is used on the phone ports, a > few config line will be generated, such as policy map etc. Do you normally > leave those in there on the phone ports? > > Cheers > > Vega > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20120222/4edd7d04/attachment-0001.html> > > Pls make sure you have configured the ephone-dns to be octo-line thanks, /Baktha ------------------------------ > > Message: 2 > Date: Wed, 22 Feb 2012 12:35:57 +0000 > From: Rynard Coetzee <rynard.coet...@bytes.co.za> > To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] cBarge in CME SRST > Message-ID: > > <97D19F256B859A48A6A93E8A9210E52A17AF8BBE@BYTESEXCH2K10N1.bytes.local> > Content-Type: text/plain; charset="us-ascii" > > Hi All > I have an issue to get the cBarge to work when my H323 GW goes into SRST > ,the shared line shows up on both phones ,but when I have an active call on > one phone ,I don`t see the number on the other phone ,and the other phone > does not go into remote in use state when I press the shared line button. I > have privacy turned off under the ephones and also under the telephony > service. Also my CFB is registered to the router when in srst mode ,I am > able to make a normal ad-hoc conference when in srst mode. > Any ideas ? > Regards > Rynard > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20120222/4065d064/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Wed, 22 Feb 2012 13:58:15 +0100 > From: "Farkas P?ter" <wormh...@sch.bme.hu> > To: Rynard Coetzee <rynard.coet...@bytes.co.za> > Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST > Message-ID: <770ca7cc57a8.4f44f...@sch.bme.hu> > Content-Type: text/plain; charset=us-ascii > > Have you tried to turn off privacy and enable remote-in-use sofktkey > through an ephone-template attached to the ephone? Privacy setting on > ephone has a bug in SRST mode. > > Peter > ----- Original Message ----- > From: Rynard Coetzee <rynard.coet...@bytes.co.za> > Date: Wednesday, February 22, 2012 1:51 pm > Subject: [OSL | CCIE_Voice] cBarge in CME SRST > To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > > > > Hi All > > I have an issue to get the cBarge to work when my H323 GW goes into > SRST ,the shared line > > shows up on both phones ,but when I have an active call on one phone ,I > don`t see the number on > > the other phone ,and the other phone does not go into remote in use > state when I press the > > shared line button. I have privacy turned off under the ephones and also > under the telephony > > service. Also my CFB is registered to the router when in srst mode ,I am > able to make a normal > > ad-hoc conference when in srst mode. > > Any ideas ? > > Regards > > Rynard > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > ******************************** >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com