Mike -
Great real-world explanation. Thanks.
On 4/9/2010 11:36 AM, Mike Peterson wrote:
> Summary , in this case "incoming called-number 100[12]" match CUE VM
> Extn 1000.
Don't you mean "match CUE VM Extn 1001/1002? I am not sure how 100[12]
could match 1000.
Thanks!
Matthew Berry
___
ipexpert.com/>
From: Omotayo
Date: Sat, 10 Apr 2010 21:16:21 +0100
To: Ashar Siddiqui
Cc: Amy Ryan , Roger Källberg
, OSL Group
Subject: Re: [OSL | CCIE_Voice] Lab 1 - MWI
i cant not use g729r8 because the call from hq to br2 phone requirement
says;
hq -cube = 16k
cube-br2
Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
>> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
>> training locations throughout the United States, Europe, South Asia and
>> Australia. Be sure to visit our online communities at
&
*Cc: *OSL Group http://ccie_voice@onlinestudylist.com>>
*Subject: *Re: [OSL | CCIE_Voice] Lab 1 - MWI
dial-peer voice 3160 voip
destination-pattern 3[16]00
session protocol sipv2
session target ipv4:10.10.202.2
incoming call
ttp://www.ipexpert.com/communities*> and
> our public website at www.ipexpert.com <*http://www.ipexpert.com/*>
>
>
>
>
> *From: *Omotayo
> *Date: *Fri, 9 Apr 2010 09:40:36 +0100
> *To: *Roger Källberg
> *Cc: *OSL Group
> *Subject: *Re: [OSL | CCIE_Voi
mmunities
<_http://www.ipexpert.com/communities_> and our public website at
www.ipexpert.com <_http://www.ipexpert.com/_>
*From: *Omotayo
*Date: *Fri, 9 Apr 2010 09:40:36 +0100
*To: *Roger Källberg
*Cc: *OSL Group
*Subject: *Re: [OSL | CCIE_Voice] Lab 1 - MWI
dial-peer voice 3160 voip
thanks,
i will check all this and have a feedback
On Fri, Apr 9, 2010 at 5:36 PM, Mike Peterson wrote:
>
> Omotayo,
>
> Amy you are right about " dtmf-relay sip-notify" but I think he also has
> something ls which doesn't match.
>
> The best practice is that always you need to check your config
Omotayo,
Amy you are right about " dtmf-relay sip-notify" but I think he also has
something ls which doesn't match.
The best practice is that always you need to check your configs at both ends in
this case CME and CUE . So could you post the relevant MWI configs from CUE too
?
Without knowing
sia and
Australia. Be sure to visit our online communities at
www.ipexpert.com/communities <http://www.ipexpert.com/communities> and our
public website at www.ipexpert.com <http://www.ipexpert.com/>
From: Omotayo
Date: Fri, 9 Apr 2010 09:40:36 +0100
To: Roger Källberg
Cc: OSL Gro
s time you should
> get output in the debug. Check the debug to see that CUE now uses your MWI
> numbers.
>
>
>
> *Roger Källberg*
> Unified Communication Consultant
> Cygate AB
>
>
>
> *From:* Omotayo [mailto:adefilabi...@gmail.com]
> *Sent:* den 9 april
[mailto:adefilabi...@gmail.com]
Sent: den 9 april 2010 09:01
To: OSL Group
Subject: [OSL | CCIE_Voice] Lab 1 - MWI
Hello,
I am working on volume 2 lab 1, when hq phone calls br2 phone and hq phone
leave a message on br2 phone, it gets to the voicemail but the MWI does not
turn. Any one with an idea
Hello,
I am working on volume 2 lab 1, when hq phone calls br2 phone and hq phone
leave a message on br2 phone, it gets to the voicemail but the MWI does not
turn. Any one with an idea of what could be the problem.
Below is the relevant config
dial-peer voice 3160 voip
destination-pattern 3[16]0
12 matches
Mail list logo
