And you have done any troubleshooting already? :)
Give us more information, as magic forum is in another section...
example:
deb mgcp
deb isdn q931
traces from call manager...
On Fri, Oct 22, 2010 at 9:52 PM, fatai_adeku...@yahoo.com <
fatai_adeku...@yahoo.com> wrote:
> Hello guys,
> I am just
Hello guys,
I am just curious. Can somebody tell me what could be d reason why outbound
call through an mgcp gateway will fail. Gateway registers fine with full T1
channels, pt/css are very okay.
Suggestions are needed please.
Tks.
Sent from my Nokia phone
__
Yeah - but again - it is good troubleshooting and can help you out for
the real lab in all seriousness. :)
--
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: [EMAIL PROTECTED]
--
Join our
Mark,
I have seen this on a couple of the labs. I think
someone out there thought it would be funny to change
the "clean" configs and watch people struggle. Real
nice huh?
--- Mark Snow <[EMAIL PROTECTED]> wrote:
> 10.21.101.0 0.0.0.255 area 0
> should be in there - but it is curious that the
>
Hi Mark,
Below is the output:
P21-BR1-RTR#debug mgcp all
This may severely impact network performance. Continue? [confirm]
Media Gateway Control Protocol all debugging is on.
P21-BR1-RTR#conf t
Enter configuration commands, one per line. End with CNTL/Z.
P21-BR1-RTR(config)#no mgcp
WARNING: n
Can you run a 'u all' then a 'debug mgcp' and try the 'no mgcp' /
'mgcp' again?
and send all the output?
thanks
--
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: [EMAIL PROTECTED]
--
Jo
Hi all,
I am having problem getting my mgcp gateway to register to CallManager. I
tried reset the gateway from CallManager, and issue no mgcp/mgcp in the
router. And, end up rebooting the CallManager and the router. But still no
luck :-(
Please kindly advice.
Here are some outputs:
P21-BR1-RTR#