Hello,
Not to worry. i figured it out
i had a DLCI mismatch
On Thu, Dec 17, 2009 at 10:28 PM, Omotayo wrote:
> Hello,
>
> Working on Proctor lab. i need to configure MLP LFI between HQ and BR1 with
> link speed of 384kbps. I have configured but link wont come up
>
> i did a shw ppp multilink bu
Hello,
Also i can not ping across from HQ to 10.10.202.1
On Thu, Dec 17, 2009 at 10:28 PM, Omotayo wrote:
> Hello,
>
> Working on Proctor lab. i need to configure MLP LFI between HQ and BR1 with
> link speed of 384kbps. I have configured but link wont come up
>
> i did a shw ppp multilink but g
Hello,
Working on Proctor lab. i need to configure MLP LFI between HQ and BR1 with
link speed of 384kbps. I have configured but link wont come up
i did a shw ppp multilink but got
No active bundles
No inactive multilink interfaces
Dont know why this is.
Below are my configs
HQ-RTR#show frame-re
Hello,
Where did you get that formula (it could be equivalent though)? what is
"codec" in your formula?,
The one I'm using is explained in more detail in the CUCM SRND
Infrastructure chapter and the QOS SRND QOS Design Overview chapter
About the L2, you are using MLP (you referenced question 5.3
Hello,
i thought the formula is ((L2 overhead+IP/UDP/RTP+voice payload)/voice
payload)* codec ??
Also why is 11byte being used. is frame relay overhead not 6 bytes?
I look forward to your clarification
Thanks
On Tue, Nov 24, 2009 at 3:13 PM, Otto Sanchez wrote:
> Hello,
>
> You might find th
Hello,
You might find the following documents useful to find the differences
between the two methods:
1.- QOS SRND, Wan Agregator QoS Design chapter (configuration examples for
both MLP and FRF.12)
https://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book.html
2.- C
I will apppreciat eit ig q 5.3 of Lab 3 from the Protoctor Guide is
explained. i dont understand the calculation
On Mon, Nov 23, 2009 at 4:47 PM, Omotayo wrote:
> Hello,
>
> Can anyone explain t me the difference in the configuration of MLP LFI and
> FRF.12 .
>
> I dont seems to understand it
>
Hello,
Can anyone explain t me the difference in the configuration of MLP LFI and
FRF.12 .
I dont seems to understand it
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
When configuring MLP LFI can you use either FRTS or Generic Traffic Shaping?
One of IPExpert's labs show an example of using GTS. However, the QoS SRND
and another Voice CCIE mentioned to me that you had to use FRTS with MLP
LFI. Can anyone clarify this?
Cheers,
