Well, "show inventory" should tell you what DSPs you have on the box.
Since Conference DSPs can't be shared, you need at least a DSP for this,
and a DSP to use for your PRI group.
So you're going to need either a PVDM2-32 or more than one PVDM2-16, I
suggest.
If you have multiple DSPs insta
Do show inv and maybe show diag | inc PVDM
also try show voice dscp group all
Or at least I think that might help see if the dscp resources are available
Bill
On Oct 26, 2012, at 12:02 PM, Nicolas MICHEL wrote:
> Same result :(
>
> Le Friday, October 26, 2012 6:57:30 PM, Abel ... a écrit :
I'm not using PL, but in my lab I had to reload the router before
reallocating DSPs to different services. I'd suggest doing "no dspfarm",
remove profiles, reload the router and then configure like you want from
scratch.
There is also a *show dspfarm all command, which should show you what DSP
is
Complete shot in the dark. I am pretty sure moh uses dsp resources. Remove
the moh commands and try again. If that does not, keep the commands removed
and reload the router.
Sent from my iPhone
On Oct 26, 2012, at 1:02 PM, "Nicolas MICHEL" wrote:
> Same result :(
>
> Le Friday, October 26
Same result :(
Le Friday, October 26, 2012 6:57:30 PM, Abel ... a écrit :
Try it with voice-card 0 with dspfarm also. Then the sessions under
the media resource.
On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL
mailto:mcl.nico...@gmail.com>> wrote:
Hi Guys,
Looks like I cannot add a C
Try it with voice-card 0 with dspfarm also. Then the sessions under the
media resource.
On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL wrote:
> Hi Guys,
>
> Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL).
>
> I have configured the voice-card 0 to share the DSP like this
Hi Guys,
Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL).
I have configured the voice-card 0 to share the DSP like this
voice-card 0
no dspfarm
dsp services dspfarm
But when it comes to CFB configuration, the max number of session is 0-0 :D
It happened to me before on H
