Hello Everybody,
After manually loading (using the proctorlabs web control interface does not
work) the initial configuration for the v3 lab1a at proctorlabs, cannot get my
hq, br1 and br2 pvc's up, they are in the DELETED status, any clue??.
I have no shutdown all the IFs,
I'm using the
Enviado el: dom 08/03/2009 17:21
Para: ccie_voice@onlinestudylist.com
Asunto: [OSL | CCIE_Voice] V3 Lab1A Initial Setup
Hello Everybody,
After manually loading (using the proctorlabs web control interface does not
work) the initial configuration for the v3 lab1a at proctorlabs, cannot get my
hq, br1
V3 Lab1A Initial SetupGenerally, you can reboot the device and it will clear
something like that.
- Original Message -
From: Otto Sanchez
To: ccie_voice@onlinestudylist.com
Sent: Sunday, March 08, 2009 5:51 PM
Subject: [OSL | CCIE_Voice] V3 Lab1A Initial Setup
Hello
otto.sanc...@damovo.com.ve
Date: Sun, 8 Mar 2009 18:41:47 -0430
To: Otto Sanchez otto.sanc...@damovo.com.ve, OSL Group
ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] V3 Lab1A Initial Setup
Hello,
I had to manually load the config for the pstn-wan router..., now all serial
IFs are up. Vrack
You know what - I realized the mistake - and now all routers initial
configs for Lab1A are loaded into the vRack interface.
There is simply no initial config to be loaded for UCM.
Thanks!
--
Mark Snow
CCIE #14073 (Voice, Security)
Senior Technical Instructor - IPexpert, Inc.
Telephone:
I have been working on the V3 Labs for a couple of weeks and was just curious.
Shouldn't there be an initial configuration that we can load on the devices for
Lab1a? The only option for configurations we have to load are the final
configs. When first connecting to the rack there is nothing
Just curious if I am missing something. Is there something we need to do to
have the initial configs placed on the devices for the first lab in the V3
series (Lab1A)? Looking at the lab it states that routing will be
pre-configured and we need to configure vlan, dhcp,ntp etc. However each
