Codec g711ulaw
Dtmf-relay rtp-nte
!
Regards,Ramy
Date: Fri, 17 Aug 2012 17:24:41 -0700
From: jonha...@yahoo.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] sip srst
any can sent me a sample sip srst for sip phones?
___
For more
any can sent me a sample sip srst for sip phones?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
hello Joe ,
in the CCM service parameters search for " SIP Station KeepAlive
Interval " , its by default 120 sec , the minimum is 60 change it
reset your phone while they are registered to the CCM and then create
the fall back scenario and check the behavior .
Best regards
Ash
On Sat, Jul 30,
I need help with SIP SRST
My SIP phones wait 360 seconds before unregister from SRST GW
and reregister back to CUCM. SCCP phones meanwhile only wait 30 seconds. it
seems that "Connection Monitor Duration" only changes the SCCP endpoints
behavior. I changed the "registrar server
Looks like the calls are going through dial-peer 9 as soon a you hit the
1. What do you have on that dial-peer ?
Another option would be to configure SIP dial rules so the phone will
wait to get all 4 digits before sending the invite to CME.
El lun, 28-03-2011 a las 20:11 +0200, Roig Borrell, Fra
Yes, in my lab everything looks find without the command
From: mjbe...@krollontrack.com
To: gorr...@hotmail.com; ccie_voice@onlinestudylist.com
Date: Thu, 25 Mar 2010 07:39:23 -0500
Subject: RE: [OSL | CCIE_Voice] SIP SRST - What application to use?
So what you’re saying is that
m] On Behalf Of Berry,
Matthew J.
Sent: Thursday, March 25, 2010 8:39 AM
To: Angel Perez; osl osl
Subject: Re: [OSL | CCIE_Voice] SIP SRST - What application to use?
So what you're saying is that SIP SRST seems to work properly even
without the sip.app application specified?
I haven'
: Thursday, March 25, 2010 6:16 AM
To: Berry, Matthew J.; osl osl
Subject: RE: [OSL | CCIE_Voice] SIP SRST - What application to use?
Hello:
The second example is not shown...
My experience tell me that if you use application sip.app the gw won't find the
app, then you will need application
that worked for me is just delete this command application sip.app
I know that this doesn't answer your question but could help
Regards
From: mjbe...@krollontrack.com
To: ccie_voice@onlinestudylist.com
Date: Thu, 25 Mar 2010 06:00:35 -0500
Subject: [OSL | CCIE_Voice] SIP S
All -
Here's a sample section from a SIP SRST setup from the SIP SRND Admin Guide:
voice register pool 1
id network 10.10.201.0 mask 255.255.255.0
application sip.app
preference 2
incoming called-number
cor incoming css-internal default
codec g711ulaw
What the heck is this ap
10 matches
Mail list logo