Dear Gerard, Marina and others. I agree that using a multi-axis goniostat is one way of separating the spots. Also that the separation of spots provided by the spatial resolution of the detector is often much better than the separation you could get from even very fine-sliced images. However, if both the beam divergence and fine phi slicing range are small, then the spots should be resolved independently of the direction of the large unit cell axis. Many beamlines are targeted to small focal spots to examine small crystals. The downside is often that the beam divergence is large, at least in the horizontal direction. Reducing the beam divergence by means of slits will lead to a reduction in flux. However, the spot to background ratio should be better with the more parallel beam and fine phi slicing option. Orienting the crystal appropriately with a multi-axis goniostat will reduce the number of images required but this should not be an issue with modern detectors.
It would be interesting to find out the relevant parameters in this case. Detector - pixel size, detector distance Beam - wavelength, divergence and beam size at crystal (both horizontal and vertical) Data collection - rotation range per image, crystal orientation Crystal - unit cell parameters Plus of course any which I have forgotten! Best regards Colin -----Original Message----- From: CCP4 bulletin board <CCP4BB@JISCMAIL.AC.UK> On Behalf Of Gerard Bricogne Sent: 12 March 2021 18:05 To: CCP4BB@JISCMAIL.AC.UK Subject: Re: [ccp4bb] Can twinning be seen in the diffraction pattern? Dear Marina, Mark seems to have hit the nail on the head. The left-hand picture of your second jpg shows that you have an axis, at about 45 degrees from the horizontal (and hence from the rotation axis), along which the spots are very close. These spots seem to be only just separated on that picture, when that direction is parallel to the detector plane, but for values of the rotation angle away from that particular one, they are likely to collide or even overlap within the same diffraction image, especially if your image width is not especially small. When you have a crystal with such a long axis in real space, and therefore closely spaced spots in reciprocal space, you need to orient it in such a way that this axis be essentially aligned with the rotation axis, and to put the detector far enough that the close spots in that direction be resolved. The idea is that the angular separation of spots provided by the spatial resolution of the detector is much better than the separation you could get from even very fine-sliced images. To orient your crystals in this way you will benefit from using a beamline equipped with a multi-axis goniostat. The dataset you will collect with such an aligned axis will have a "cusp" of missing reflections around that axis, but that is a better outcome than the alternative of having the zillions of "angular overlaps" between distinct reflections that would be produced with a long-axis orientation such as that shown in your pictures. That random overlap will produce the same effect on intensity statistics as twinning, but there would not be a consistent twinning fraction among all your measurements that you could then put into a refinement against them. Do your unit-cell parameters confirm this scenario? With best wishes, Gerard. -- On Fri, Mar 12, 2021 at 06:29:06PM +0100, Mark J van Raaij wrote: > Hi Marina, > The close-together spots in the zoom inset of your figure I think are not > split spots, but separate reflections. They are close togeter because you > appear to have a unit cell with one axis much longer than the other two (we > work on elongated proteins, so we have some experience with that). The same > short distances are also clearly visible in the picture on the bottom left. > If you index the image in MOSFLM and it puts boxes around both I'd conclude > they are separate reflections, but there are perhaps more sophisticated ways > to verify this. > So I think its true that in this case the twinning is not (obviously) visible > in the diffraction pattern - but detected through intensity statistics later. > Best wishes, > Mark > > Mark J van Raaij > Dpto de Estructura de Macromoleculas > Centro Nacional de Biotecnologia - CSIC calle Darwin 3 > E-28049 Madrid, Spain > > > > > On 12 Mar 2021, at 11:30, Marina Gárdonyi > > <marina....@pharmazie.uni-marburg.de> wrote: > > > > > > Hello everyone, > > > > I am a PhD student at the Philipps-University in Marburg and I am currently > > writing my thesis. > > > > I have problems to understand whether in my case twinning can be seen in > > the diffraction pattern or not. > > > > I know that it depends on the type of twinning wheter you can see it in the > > diffraction pattern. The crystal had a resolution of 2.2 A. During > > processing it seemed to have the space group P622, but in the end it was > > P3(2)21. With phenix Xtriage I found out, that the data set was twinned. > > The twin law was -h,-k,l. So it should be merohedral twinning. > > I read in a paper, that in case of merohedral twinning you cannot see it in > > the diffraction pattern. But in my case that seemed not to be the case > > because of splitted reflections. Or am I wrong??? > > > > I would be very happy to hear your opinion on that. Thanks in advance! > > > > Best regards, > > Marina > > > > -- > > Marina Gárdonyi > > > > PhD Student, Research Group Professor Dr. Klebe > > > > Department of Pharmaceutical Chemistry > > > > Philipps-University Marburg > > > > Marbacher Weg 6, 35032 Marburg, Germany > > > > Phone: +49 6421 28 21392 > > > > E-Mail: marina....@pharmazie.uni-marburg.de > > > > http://www.agklebe.de/ > > > > #################################################################### > > #### > > > > To unsubscribe from the CCP4BB list, click the following link: > > https://www.jiscmail.ac.uk/cgi-bin/WA-JISC.exe?SUBED1=CCP4BB&A=1 > > > > This message was issued to members of www.jiscmail.ac.uk/CCP4BB, a > > mailing list hosted by www.jiscmail.ac.uk, terms & conditions are > > available at https://www.jiscmail.ac.uk/policyandsecurity/ > > <diffraction-pattern.jpg><diffraction-pattern-2.jpg> > > > ###################################################################### > ## > > To unsubscribe from the CCP4BB list, click the following link: > https://www.jiscmail.ac.uk/cgi-bin/WA-JISC.exe?SUBED1=CCP4BB&A=1 > > This message was issued to members of www.jiscmail.ac.uk/CCP4BB, a > mailing list hosted by www.jiscmail.ac.uk, terms & conditions are > available at https://www.jiscmail.ac.uk/policyandsecurity/ -- =============================================================== * * * Gerard Bricogne g...@globalphasing.com * * * * Global Phasing Ltd. * * Sheraton House, Castle Park Tel: +44-(0)1223-353033 * * Cambridge CB3 0AX, UK Fax: +44-(0)1223-366889 * * * =============================================================== ######################################################################## To unsubscribe from the CCP4BB list, click the following link: https://www.jiscmail.ac.uk/cgi-bin/WA-JISC.exe?SUBED1=CCP4BB&A=1 This message was issued to members of www.jiscmail.ac.uk/CCP4BB, a mailing list hosted by www.jiscmail.ac.uk, terms & conditions are available at https://www.jiscmail.ac.uk/policyandsecurity/ -- This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message. Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom ######################################################################## To unsubscribe from the CCP4BB list, click the following link: https://www.jiscmail.ac.uk/cgi-bin/WA-JISC.exe?SUBED1=CCP4BB&A=1 This message was issued to members of www.jiscmail.ac.uk/CCP4BB, a mailing list hosted by www.jiscmail.ac.uk, terms & conditions are available at https://www.jiscmail.ac.uk/policyandsecurity/