I just acquired one of the guys w/o a display
Looking for the spec's of the display connector.
I have what I believe to be the pinout but nothing on timing, scan rates,
levels etc.
Other identification on the thing is
"1 MB Board internal set as 1st Card"
Upgraded to 9836CU
NO BATT / DOES NOT
Vincent & All,
Yes, I read that the series conforms to that particular UL fusing
requirement. My point was that I didn't see any promotion of or expansion
on the fusing qualities of the design. The UL spec almost seemed like an
afterthought. But then, I am not an engineer - so not used to parsing
Andrew Grove, co-founder of INTEL, passed away.Truly a giant of our
industry. He made possible, or promoted, the brains and memory chips
that drive our machines, old and new.
> From: Josh Dersch
> I have no excuse, I just get nervous working on these things.
I should hope you do get nervous! Anytime one is working around equipment that
contains lethal voltages, one _should_ be nervous! It helps with...
> I suppose eventually I'll get used to it.
Don't ge
On Tue, Mar 22, 2016 at 8:52 AM, Dr. Roland Schregle <
roland.schre...@gmail.com> wrote:
> On Tue, 22 Mar 2016 13:45:38 +0100, John H. Reinhardt <
> johnhreinha...@yahoo.com> wrote:
>
>
> Anyone can also get a free membership at Encompasserve by ssh to
>> eisner.decus.org and creating an account.
https://newsroom.intel.com/news-releases/andrew-s-grove-1936-2016/?utm_content=buffer5c774&utm_medium=social&utm_source=linkedin.com&utm_campaign=buffer
Gracias | Regards - Saludos | Greetings | Freundliche Grüße | Salutations
--
*Sergio Pedraja*
--
twitter: @sergio_pedraja | skype: Sergio Ped
On Tue, 22 Mar 2016 13:45:38 +0100, John H. Reinhardt
wrote:
Anyone can also get a free membership at Encompasserve by ssh to
eisner.decus.org and creating an account.
Good to know -- many thanks, Peter! Most of the ones I tried were long
defunct.
--GT
--
"END OF LINE" [MCP, 1982]
"
On Tue, 22 Mar 2016 12:29:18 +0100, Peter Coghlan
wrote:
You also need to be a member of a user group such as DECUS
or Interex or whatever it is called this week. Some of these have
membership
fees but as far as I know, there is at least one international group that
anyone can join for f
On Tue, Mar 22, 2016 at 12:29 AM, Mattis Lind wrote:
> >>> Good news - mine worked so fingers crossed for yours too. I now have a
> >> functioning PSU again though I've not tried it back in the chassis
> yet...
> >>
> >> Nice! My replacements arrived today and unfortunately I did not have
> > su
I'm actually not sure how they are sectored, but I assume my Poly 8813 had
whatever controller most other Polys had.
I'm not looking for anything, I just wanted them to go to a good home!
On Tue, Mar 22, 2016 at 11:33 AM, dwight wrote:
> Hi Ben
> I have the manual but would be interested in th
On Mon, Mar 21, 2016 at 5:37 PM, Chuck Guzis wrote:
>
> Interesting. If water evaporation accounts for the dimensional
> instability, why not use something that doesn't evaporate quite as easily?
> Say, ethylene glycol or a silicon oil?
I had this idea as well but I have not experimented with
On Mon, Mar 21, 2016 at 5:25 PM, Jules Richardson <
jules.richardso...@gmail.com> wrote:
>
> Interesting... so boiling them can make them expand too much, leaving them
> for a few weeks will allow them to contract, but they "remember" their
> manufactured size, such that a few weeks after they the
Hi Ben
I have the manual but would be interested in the disk.
Do you know if they are hard or soft sectored?
I suspect they are hard sectored as that was the most common.
There soft sectored was not industry standard and took a special
controller to read.
What are you looking for?
Dwight
___
I had a Poly 8813, and just found that I still have the System 88 User's
Manual, including the Macro 88 manual, schematics, and 16K RAM
manual/schematics.
I also have some disks that came with the system, though their status is
unknown. I believe many of them were just blank, but there is some sys
While archiving a bunch of old 8 inch disks I found disks that apparently
contain an old RSX11S system. I think it has been used in some kind of
railroad CTC system.
https://dl.dropboxusercontent.com/u/96935524/Datormusuem/PDP11RX01DISKS/DISK4.RAW
It is possible to boot this image in SimH (when s
From: drlegendre: Monday, March 21, 2016 6:50 PM
I don't quite get what makes this DigiKey part suitable for the role of a
fused resistor. I do see that it has specs for 'fusing behavior' but that
aside, I don't see that this series is marketed / sold as a "fusible
resistor".
I take "UL1412 rec
>
> Anyone have the multinet 4.1 PAK checksum and install key info? I need to
> re-install my PAK and I don't have *doh!* the checksum value. I thought I
> did but...nope.
>
You can get a Multinet hobbyist license from Process software if you first get
a VMS hobbyist license from HP. Both are f
>>> Good news - mine worked so fingers crossed for yours too. I now have a
>> functioning PSU again though I've not tried it back in the chassis yet...
>>
>> Nice! My replacements arrived today and unfortunately I did not have
> such good luck. No smoke or fire, but now I get nothing at all out o
18 matches
Mail list logo
