Hi.
As some of you might remember I aquired a DEC Pro 380 (a VAX console really).
I've
been reading up on it but I this I can't figure out:
1. Without the Extended Bitmap Option (EBO) is it posdible to display color?
Perhaps at the lower resolutions?
2. With the Telephone Management system, i
On 11/04/2016 20:58, William Donzelli wrote:
I am not interested in the floor, but I am curious - are raised floor
tiles in Europe/UK/elsewhere the same size as the US ones (24 by 24
inches or 61 by 61 cm)?
No, they're 60cm x 60cm (at least, all three I've got are).
--
Pete
I am not interested in the floor, but I am curious - are raised floor
tiles in Europe/UK/elsewhere the same size as the US ones (24 by 24
inches or 61 by 61 cm)?
--
Will
On Mon, Apr 11, 2016 at 3:51 PM, Jos Dreesen wrote:
> A local reseller has a good supply of secondhand raised flooring availab
A local reseller has a good supply of secondhand raised flooring available, for
7 USD per square meter, which I believe is a very good price.
Not affiliated etc etc, just giving a heads up on stuff that is not easy to
find.
Look for it on Ricardo.ch
Jos
That would work on my poly88 video card,
with no grayscale.
Dwight
From: cctalk on behalf of Bill Sudbrink
Sent: Monday, April 11, 2016 8:21 AM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: Voltage regulator with alternate voltage
Chris Elmquist wrote
> On Monday (04/11/2016 at 11:21AM -0400), Bill Sudbrink wrote:
> > Dwight wrote:
> > > How many pixels will the camera have?
> >
> > 1024. The (at the time) secret sauce image sensor
> > is a Mostek MK4008-9. 32x32 pixel image.
>
> Which was a topless DRAM right?
Yes. Dr.
On Monday (04/11/2016 at 11:21AM -0400), Bill Sudbrink wrote:
> Dwight wrote:
> > How many pixels will the camera have?
>
> 1024. The (at the time) secret sauce image sensor
> is a Mostek MK4008-9. 32x32 pixel image.
Which was a topless DRAM right?
Not often a guy gets to use the word "topless
Dwight wrote:
> How many pixels will the camera have?
1024. The (at the time) secret sauce image sensor
is a Mostek MK4008-9. 32x32 pixel image.
Bill S.
The data sheets all spec stability when the output has a fraction of
one uF on the output, but for a variety of (bad) reasons some
designers insist on putting, sometimes, tens thousands of often very
low ESR uF at the output. That's extremely hard on the protection
diode and it'll have to be beefy
If your in a hurry, here is what I've done in the past. I did this for a
DEC PDP 11. It needed the 5V.
Get a modern switcher that meets the power requirements and one that takes
external lugs and supports external voltage sensing.When you crimp the lug
at the far end add the sense wire so that bot
10 matches
Mail list logo
