Re: IBM 3511

> On Jun 9, 2016, at 8:21 PM, Mark J. Blair wrote: > > >> On Jun 9, 2016, at 19:39, William Donzelli wrote: >> >> So today I picked up something I had never seen before - an IBM 3511. >> This is a large tower expansion chassis for the PS/2 line. It looks

Re: IBM 3511

> On Jun 9, 2016, at 19:39, William Donzelli wrote: > > So today I picked up something I had never seen before - an IBM 3511. > This is a large tower expansion chassis for the PS/2 line. It looks > very straightforward - but can any of you PS/2 fans comment on this? > Was

Re: IBM 3511

3511 seems to have been a thing from 1990 through 1993, according to IBM. -- Will On Thu, Jun 9, 2016 at 10:51 PM, william degnan wrote: > Did not exist during my time at IBM. Must be a later ps/2 thing. I may > have some parts related to it though. > > Bill > > Bill

Re: IBM 3511

Did not exist during my time at IBM. Must be a later ps/2 thing. I may have some parts related to it though. Bill Bill Degnan twitter: billdeg vintagecomputer.net On Jun 9, 2016 10:39 PM, "William Donzelli" wrote: > So today I picked up something I had never seen before

IBM 3511

So today I picked up something I had never seen before - an IBM 3511. This is a large tower expansion chassis for the PS/2 line. It looks very straightforward - but can any of you PS/2 fans comment on this? Was it an unsuccessful product? Low demand item? -- Will

Attend and Participate Information Security and Cyber Forensics (INFOSEC2017)

In cooperation with Faculty of Management, Comenius University in Bratislava, Slovakia, SDIWC is inviting everyone to attend and participate in The Third International Conference on Information Security and Cyber Forensics (INFOSEC2017)

RE: Windows use in medical spaces (Re: vintage computers in active use)

On Fri, 27 May 2016, Dave Wade wrote: > > It makes me wonder how many patients have had to wait on care or didn't > get > > proper care because of an IT screwup related to Windows. I have to say > just > > _seeing_ Windows on machines in the ER made me livid. I found it > breathtaking > > they

Using the simh LGP-30 emulator

Some time ago, there were two posts asking how to operate the simh LGP-30 emulator. It is not exactly obvious from the rudimentary manual, and it seems nobody had figured it out completely. I am slightly obsessed with this machine at the moment (it happens), so here is a how-to on operating the

Re: Big announcement tomorrow night

> On Jun 9, 2016, at 11:05 , Chris Hanson wrote: > > On Jun 8, 2016, at 9:08 PM, Mark J. Blair wrote: >> >> >>> On Jun 8, 2016, at 09:34, Evan Koblentz wrote: >>> Give us a break, this is fundraising for a non-profit. >> >> I

Re: TK50 and xxdp+

On 09/06/2016 22:13, Glen Slick wrote: On Thu, Jun 9, 2016 at 10:49 AM, Rod Smallwood wrote: Hi I'm renovating a TK50 . Its on my 11/83 and if use the PDP-11 format disk the Identify function finds and lists it. There should be a TK50 exerciser among

Re: VAX-11/780 Board Set on eBait

It looked like a good batch of boards and i was holding out on finding a machine. Any good place to get a 11/780 aside from watching the local scrap centers with my fingers crossed one will be there? On Thu, Jun 9, 2016 at 4:24 PM, Mike Ross wrote: > On Fri, Jun 10, 2016 at

Re: TK50 and xxdp+

On Thu, Jun 9, 2016 at 10:49 AM, Rod Smallwood wrote: > Hi > > I'm renovating a TK50 . Its on my 11/83 and if use the PDP-11 format > disk the Identify function finds and lists it. > > There should be a TK50 exerciser among the xxdp functions somewhere

Re: VAX-11/780 Board Set on eBait

On Fri, Jun 10, 2016 at 6:01 AM, Josh Dersch wrote: > On Thu, Jun 9, 2016 at 3:48 AM, Noel Chiappa > wrote: > >> > From: Devin Davison >> >> > well there goes my plan of trying to keep it under the radar. >> >> Sorry, I didn't mean to upset

Re: SunOS 4

On Thu, 9 Jun 2016, Chris Hanson wrote: > The closest I got was bringing up GCC 2.95.3 using the system compiler, > I couldn?t manage to build GCC 3.3 or 4.2.1 for SunOS. (For legal > reasons I can?t really go near GPLv3 developer tools.) Last time I tried was around gcc v4.7 and it failed

Re: SunOS 4

This all makes me want to try bringing up a modern compiler on SunOS 4.1.4 on my SPARCstation 20 again. The closest I got was bringing up GCC 2.95.3 using the system compiler, I couldn’t manage to build GCC 3.3 or 4.2.1 for SunOS. (For legal reasons I can’t really go near GPLv3 developer

Re: Big announcement tomorrow night

On Jun 8, 2016, at 9:08 PM, Mark J. Blair wrote: > > >> On Jun 8, 2016, at 09:34, Evan Koblentz wrote: >> Give us a break, this is fundraising for a non-profit. > > I wasn't trying to be critical at all. I just didn't make the connection that > the auction

Re: SunOS 4

Thanks all! Thanks, Bryan > On Jun 9, 2016, at 12:43 PM, Eric Christopherson > wrote: > >> On Thu, Jun 9, 2016 at 12:50 AM, Pete Plank wrote: >> >> >>> On Jun 8, 2016, at 7:51 PM, Seth Morabito wrote: >>> If you have a Sun3, you

Re: SunOS 4

> I don't suppose anyone will be too upset if I share my SunOS stuff > on the web. > > For now I've put it at: > > http://www.loomcom.com/SunOS > > You'll probably want SunOS-4.1.4.iso.gz, which should expand to > about 380MB or so. Patches are under sunos_414_patches Many thanks for putting

Re: SunOS 4

I guess now I'm going to have to add my prototype Sparc (no model number, but looks like a 1) pizza box to the stack of machines to run again. Thanks -pete On Thu, Jun 9, 2016 at 9:43 AM, Eric Christopherson < echristopher...@gmail.com> wrote: > On Thu, Jun 9, 2016 at 12:50 AM, Pete Plank

Re: VAX-11/780 Board Set on eBait

On Thu, Jun 9, 2016 at 3:48 AM, Noel Chiappa wrote: > > From: Devin Davison > > > well there goes my plan of trying to keep it under the radar. > > Sorry, I didn't mean to upset your plan (and you); I just didn't know if > anyone was watching for VAX-11/780

TK50 and xxdp+

Hi I'm renovating a TK50 . Its on my 11/83 and if use the PDP-11 format disk the Identify function finds and lists it. There should be a TK50 exerciser among the xxdp functions somewhere anybody know which one? Rod

Re: SunOS 4

On Thu, Jun 9, 2016 at 12:50 AM, Pete Plank wrote: > > > On Jun 8, 2016, at 7:51 PM, Seth Morabito wrote: > > If you have a Sun3, you can grab SunOS-4.1.3_U1B.iso.gz. > > > > -Seth > > -- > > Seth Morabito > > s...@loomcom.com > >

Re: Trying to repair a Smith-Corona letter quality "printer"

On May 3, 2016, at 8:42 AM, Chris Osborn wrote: > Does anyone have any idea of how to get this thing open (without breaking the > plastic)? I’ve searched all over the internet but I can’t find any scanned > service manuals. The typewriter is from 1984 and was sold for

LASM compatible cross assembler?

After getting my TRS-80 Model II keyboard repaired and up & running last week (http://www.insentricity.com/a.cl/257), I've been messing around with the Kermit source code to see if I can add hardware flow control support. I'm able to build Kermit using LASM on CP/M or on an emulator, but it

Re: UNIBUS M9312 ROMS

> On Jun 9, 2016, at 12:56 AM, Don North wrote: > > On 6/8/2016 5:56 PM, Paul Koning wrote: >>> On Jun 8, 2016, at 6:46 PM, Jay West wrote: >>> >>> I wrote... >>> On Thu, Jun 9, 2016 at 6:34 AM, Jay West wrote: 23-E39A9

RE: IO Selectric

Thanks Chuck, I should have got those before as I have been a member on there for ages, just couldn't remember they were there. The stuff in mine looks very similar to the Louis Sanders article I have, so I am sure its from the same article. I now need to read the theory and clean, adjust and

Re: VAX-11/780 Board Set on eBait

> From: Devin Davison > well there goes my plan of trying to keep it under the radar. Sorry, I didn't mean to upset your plan (and you); I just didn't know if anyone was watching for VAX-11/780 parts, they come by so rarely. We have discussed this topic before, but let me recapitulate

Re: UNIBUS M9312 ROMS

> From: Jay West > some (me) are sticklers for original code. Is there possibly a listing of the code in a fiche, somewhere? Noel

Re: UNIBUS M9312 ROMS

On 6/8/2016 5:56 PM, Paul Koning wrote: On Jun 8, 2016, at 6:46 PM, Jay West wrote: I wrote... On Thu, Jun 9, 2016 at 6:34 AM, Jay West wrote: 23-E39A9 is still lost to time, afaik. TMSCP - TU81 To which mike replied... Could that not be

Re: SunOS 4

> On Jun 8, 2016, at 7:51 PM, Seth Morabito wrote: > If you have a Sun3, you can grab SunOS-4.1.3_U1B.iso.gz. > > -Seth > -- > Seth Morabito > s...@loomcom.com There’s also a decent SunOS collection for Sun3/3x available on the Sun3/3x archive at: