Re: HP 2108A key

Mike, That makes two of us. I am interested too, I have the same key setup on my 21MX and have been looking for the key for a long time! So if someone can make it, I am interested! Marc On Sep 20, 2017, at 9:51 PM, Mike Loewen via cctalk wrote: The key is for this

Re: HP 9845 complete system on auction in Sweden

Wow, looking almost new! I didn't know you could interface a 9845 with a 7970 tape drive. Marc On Sep 22, 2017, at 12:23 AM, Pontus Pihlgren via cctalk wrote: Hi All There is a very nice looking HP 9845 with peripherals and documentation for sale in Sweden, on ebay

Re: Old CAD Software KTI/Cascade anno 1997

if no one here can help u try contacting delft or any architecture firm thats been around a while aka the admins-IT type peeps u never know w might be lurking in a back room. or other schools with drafting departments On Fri, Sep 22, 2017 at 12:51 AM, Smitsman, Bart via cctalk <

Re: HP 2108A key

On Fri, 22 Sep 2017, Dennis Boone via cctalk wrote: The correct cuts for the 4T1427 are 7241 read bow to tip. Some manufacturers (Schlage) stamp the cuts on the key. Some, in order to make that information "secure", reverse the sequence (slightly less secure that ROT-13). But, mustn't reveal

Re: HP 2108A key

> Unmarked - single sided in an HP 1000 M-series; looks like a cheap > generic cam lock, may be a post-sale replacement lock (due to too > many keys extant, or the boss wandered off with the key) It is > definitely NOT a match for either of the keys that Dennis described. > Cuts from bow to tip

Re: HP 2108A key

YIKES I should check too I do have a few 30 year old keys on my ring. Pretty sure the Hp-2000 and HP-3000 keys are still there perhaps the pdp-8 m or f and possibly one for the 2000ATimeshare cabinets. I will see what else... you tend to put them on and never take

Re: HP 2108A key

YIKES I should check too I do have a few 30 yea old keys on my ring. Pretty sure the Hp-2000 and HP-300 key are still there and possibly one for the 2000A Timeshare cabinets. I will see what else... you tend to put them on and never take them off. Ed# In a message

Re: HP 2108A key

Well, that explains one of my mystery keys on my keychain... I used to work with HP 1000 systems. I still have one of the HP 264x 'keys' which opened up the terminal. From: "cctalk" To: "cctalk" Sent: Friday, September 22, 2017 1:20:42 PM

Re: HP 2108A key

> Unmarked - single sided in an HP 1000 M-series; looks like a cheap > generic cam lock, may be a post-sale replacement lock (due to too > many keys extant, or the boss wandered off with the key) It is > definitely NOT a match for either of the keys that Dennis described. > Cuts from bow to

RE: EMI filter in PDP-11/23

I had a failure of a Corcom filter in my Rainbow, it was a different model to yours though, it too had failed short. I found a Power Entry Module on the Farnell site and made a crude panel for it to mount it, just like the socket you are talking about. I would just look at the datasheet to get the

RE: HP 2108A key

Christian wrote --- In total, there are three different keys used on the 21MX, 1000M and 1000E/F. --- On Fri, 22 Sep 2017, Jay West via cctalk wrote: Ug... no. There are not 3 different keys used. And for the record, the 1000M and 1000E/F are *ALL* 21MX's, at least in the end. They

Re: EMI filter in PDP-11/23

I did think this - if I can't find something that will fit, I'll pretend it didn't happen and just remove it. Good to hear some validation, still. Thanks! Aaron. Paul Koning writes: > If all else fails, a pair of wires will do. You don't actually need an EMI > filter for the thing to

Re: EMI filter in PDP-11/23

If all else fails, a pair of wires will do. You don't actually need an EMI filter for the thing to work. But it's good to have one to keep EMI within factory specs. So I'd classify these devices as "optional but desirable". paul > On Sep 22, 2017, at 12:12 PM, Aaron Jackson via

I REALLY need a scrounger in Richmond, VA

Dude just pulled 2 truckloads of early Apple and 386/486 computers and keyboards out of storage and is scrapping them. I REALLY need somebody there to sort the good from the trash. Can anybody help? He gave me one week to come up with someone to scrounge, then it all goes for scrap. Cindy

EMI filter in PDP-11/23

Hi all, The EMI filter in my PDP-11 (11/23+) chassis has failed and appears to be a dead short. I've had a browse on the web but thought I would ask here if anyone knows of a fitting replacement? It's a Corcom F2932C, 5A at 250V. The small IEC sockets with built in 5A EMI filter was my first

Re: HP 9845 complete system on auction in Sweden

On Fri, Sep 22, 2017 at 7:14 AM, Torfinn Ingolfsen via cctalk < cctalk@classiccmp.org> wrote: > On Fri, Sep 22, 2017 at 9:23 AM, Pontus Pihlgren via cctalk > wrote: > > Hi All > > > > There is a very nice looking HP 9845 with peripherals and documentation > > for sale in

RE: Looking for firmware of HP82937 & HP82939

If no-one else has, I should be able to... David Collins HP Computer Museum -Original Message- From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of F.Ulivi via cctalk Sent: Friday, 22 September 2017 10:35 PM To: cctalk@classiccmp.org Subject: Looking for firmware of HP82937

RE: HP 2108A key

Christian wrote --- In total, there are three different keys used on the 21MX, 1000M and 1000E/F. --- Ug... no. There are not 3 different keys used. And for the record, the 1000M and 1000E/F are *ALL* 21MX's, at least in the end. They are also all "1000's" in the end as well :> But

Re: HP 2108A key

On 21 September 2017 at 19:59, Fred Cisin via cctalk wrote: > > We can sit on the front porch, waving our canes, and yelling at the kids to > get off of the lawn. Well quite. > And continue to rant about the decline in education, software quality, and > users, such as

Looking for firmware of HP82937 & HP82939

Hi everyone, does anyone of you happen to know if the i8049 MCUs inside HP85 expansion modules 82937 (HPIB) & 82939 (RS232) have ever been dumped? The HP part numbers for these masked ROM devices should be 1820-2437 and 1820-2438, respectively. I'm asking because I'm working on the MAME emulation

Re: HP 9845 complete system on auction in Sweden

On Fri, Sep 22, 2017 at 9:23 AM, Pontus Pihlgren via cctalk wrote: > Hi All > > There is a very nice looking HP 9845 with peripherals and documentation > for sale in Sweden, on ebay owned auction-site Tradera: > >

Re: HP 2108A key

OK that is helpful! I can look though the box and have something to compare with! For the purpose of finding a match for Mike's 2018 is that a single sided or double sided key Mike ( or others knowing) the HP MX Processor MXthat was contributed to SMECC is thinner than the

Re: HP 2108A key

On Thu, 21 Sep 2017, Sam O'nella wrote: Should be easy but my mobile google fu is failing. Didn't Jay and a few others know if a vintage computer key database/site somewhere? Would that possibly have or benefit from getting afterwards? null Ok, I went into our storage and made some pics:

HP 9845 complete system on auction in Sweden

Hi All There is a very nice looking HP 9845 with peripherals and documentation for sale in Sweden, on ebay owned auction-site Tradera: https://www.tradera.com/item/340854/290566778/hewlett-packard-9845-datorsystem The system was previously on "blocket", which is more like craigslist, for

Old CAD Software KTI/Cascade anno 1997

Dear classiccmp subscribers, Does some know the software Atlas Created by KTI Cascade (http://www.kticorp.com/ ) We need to open 2 drawing but we don't have the software anymore. We've contacted the company and consultants but they don't have the software anymore. Original was the software