> On Jan 28, 2018, at 20:56, Marc Howard via cctalk
> wrote:
>
> I've got two RL02 units. One is a parts unit and has an access plate for
> the door solenoid. I can open it. The other has no access plate nor is
> there a cutout for one. How do I open this cover with the power off? This
>
I've got two RL02 units. One is a parts unit and has an access plate for
the door solenoid. I can open it. The other has no access plate nor is
there a cutout for one. How do I open this cover with the power off? This
is a newer unit as it has head lock screws on the bottom of the drive.
The
> On Jan 28, 2018, at 12:23 PM, Mark Matlock via cctech
> wrote:
>
> Jerry, Noel,
>
>Thanks for your feedback. Also, Noel was correct on the typos I made on
> DD1, DE1, and DF1. I was copying from a scanned .pdf and some strange OCR
> translation was occurring and I missed correcting tho
On 01/27/2018 10:29 PM, allison via cctalk wrote:
FYI all this is covered in the BA123/microVAC manuals. Seriously, if
your not familiar with Qbus and microVAX boxes
RTFM and as many as you can find.
The 630QB tech manual seems to be pretty comprehensive, and I have digested
that one now, I t
Jerry, Noel,
Thanks for your feedback. Also, Noel was correct on the typos I made on
DD1, DE1, and DF1. I was copying from a scanned .pdf and some strange OCR
translation was occurring and I missed correcting those.
Yesterday I stuck the ADV11-A in a MINC-23 with 256 KB memory and verif
On 27/01/18 23:38, Jules Richardson via cctalk wrote:
With the drive actually hooked up to the controller, I'm getting "?54
RETRY" messages when it's trying to boot - however, I'm not entirely
sure what device it's trying to boot from! Maybe it's attempting the
TK50, or via Ethernet. I still
Thanks.
The documentation was confusing as I expected it to be clearer that they could
coexist. So if I run the installer but don’t select erase drive I should be
fine. FYI. I am using an XProfile emulating the widget but don’t want to keep
swapping CF cards or changing switches to select d
> On 28 Jan 2018, at 16:11, Ray Arachelian via cctalk
> wrote:
>
> On 01/28/18 06:09, corey cohen via cctalk wrote:
>> Or do I need an external profile for my 2/10 if I want to still use LOS.
>>
>
> Sure, it's possible for LOS to coexist with LPW on the same hard drive,
> and you can use tha
On 01/28/18 11:06, Adrian Graham via cctalk wrote:
>
> 6 on a Lisa? I can only think of LOS, XENIX, Workshop. Hm, I’ve got David T
> Craig’s Lisa CDs kicking around somewhere, I wonder what else is on those.
I mean, there's LOS2, LPW2, LOS3, LPW3, UniPlus, Xenix. Not sure if
Monitor (a very simpl
On 01/28/18 06:09, corey cohen via cctalk wrote:
> Or do I need an external profile for my 2/10 if I want to still use LOS.
>
Sure, it's possible for LOS to coexist with LPW on the same hard drive,
and you can use that to build LOS apps in LPW, then restart and use them
in LOS.
Installation inst
> On 28 Jan 2018, at 16:00, Jos Dreesen via cctalk
> wrote:
>
> On 28.01.2018 16:25, Adrian Graham via cctalk wrote:
>>> On 28 Jan 2018, at 11:09, corey cohen via cctalk
>>> wrote:
>>>
>>> Or do I need an external profile for my 2/10 if I want to still use LOS.
>>>
>
> One alternative is t
On 28.01.2018 16:25, Adrian Graham via cctalk wrote:
On 28 Jan 2018, at 11:09, corey cohen via cctalk wrote:
Or do I need an external profile for my 2/10 if I want to still use LOS.
One alternative is to go for an IdeFile : my Lisa has a 260MB IDE harddisk,
seven partitions, and 6 differe
> From: Mark J. Blair
> I have a single decpack cartridge ... It's marked "decpack 2200 BPI-12"
> and has 12 sector notches in the hub. Does that mean that it was most
> likely used with an RK05 drive in a PDP-11 system?
Yes.
> I hope that I can procure a matching drive for i
> On 28 Jan 2018, at 11:09, corey cohen via cctalk
> wrote:
>
> Or do I need an external profile for my 2/10 if I want to still use LOS.
>
> Thanks,
> Corey
>
> corey cohen
> uǝɥoɔ ʎǝɹoɔ
It’s been a while since I did this but going from memory you’ll need an
external ProFile to boot from i
Or do I need an external profile for my 2/10 if I want to still use LOS.
Thanks,
Corey
corey cohen
uǝɥoɔ ʎǝɹoɔ
Phil Budne wrote:
> DL.11I= B15 ; BIT 15 - 11 INT(INTERRUPTS IF 11-INT-ENB SET)
> DL.11C= B14 ; BIT 14 - CLEAR 11 INT
> DL.10I= B13 ; BIT 13 - 10 INT
> DL.10C= B12 ; BIT 12 - CLEAR 10 INT
> DL.NXM= B11 ; BIT 1
16 matches
Mail list logo