Chuck,I do have the correct tool. I used the crimper I normally use for my
other IDC cables but just couldn't apply enough force to get the teeth to come
through the cable all the way. That's when I switch over to a table mounted
vise and it couldn't provide enough pressure to close the two
> The UC3842 datasheet does show you can draw up to 20 mA from the Vref pin,
> which should certainly power up a 555. But, this is a 5 V regulator, and
may
> not be working properly. it may be that driving several mA to the 555, E2
and
> other components has cooked it over time. With the 555
On 2/15/20 2:11 PM, Ali via cctalk wrote:
> Hello All,Recently I tried making some custom SCSI cable. In the past I have
> successfully made my own 50pin SCSI and Floppy cables with out much issue.
> However, I am finding it almost impossible to crimp the HD68 connectors on
> the cable. I have
Hello All,Recently I tried making some custom SCSI cable. In the past I have
successfully made my own 50pin SCSI and Floppy cables with out much issue.
However, I am finding it almost impossible to crimp the HD68 connectors on the
cable. I have even tried a vise grip and I still couldn't get it
On Sat, Feb 15, 2020, 14:38 Chuck Guzis wrote:
> On 2/15/20 10:47 AM, Patrick Finnegan wrote:
>
> > I'm not sure why the index sensors on both are broken, but not the write
> > protect notch sensors. Hopefully once the replacements arrive, replacing
> > that will fix the drives. The drives look
Classic heavy duty HP Designjet 755CM C3198B in search of a new home as
it's now one stop short of the e-waste people.
It's large (handles a 36in roll) and has the usual DesignJet stand.
I can even include some NOS ink cartridges.
It would need a horizontal belt as they deteriorate even
On 02/15/2020 12:17 PM, Rob Jarratt via cctalk wrote:
A little while back I posted here because I needed help with analysing the
failure of the PSU from my VAXmate. Since then I have had some comments on
the reverse engineered schematic which I have now improved and which is
here:
On 2/15/20 10:47 AM, Patrick Finnegan wrote:
> I'm not sure why the index sensors on both are broken, but not the write
> protect notch sensors. Hopefully once the replacements arrive, replacing
> that will fix the drives. The drives look pristine on the inside.
The biggest (and most
On Sat, Feb 15, 2020, 13:38 Chuck Guzis via cctalk
wrote:
> On 2/12/20 4:49 AM, Patrick Finnegan via cctalk wrote:
> > I've got a couple of Teac FD-54B's that appear to have problems with
> their
> > index sensors. Does anyone have any docs for these? The internet seems to
> > barely know they
On 2/12/20 4:49 AM, Patrick Finnegan via cctalk wrote:
> I've got a couple of Teac FD-54B's that appear to have problems with their
> index sensors. Does anyone have any docs for these? The internet seems to
> barely know they exist vs the FD-55, which has info everywhere. I'm thrown
> off a bit
A little while back I posted here because I needed help with analysing the
failure of the PSU from my VAXmate. Since then I have had some comments on
the reverse engineered schematic which I have now improved and which is
here:
On Fri, 14 Feb 2020 at 23:43, Alan Perry via cctalk
wrote:
>
> PS I forgot to thank Liam for offering assistance, so thanks, Liam.
You're very welcome. Sorry I misunderstood and couldn't help.
--
Liam Proven - Profile: https://about.me/liamproven
Email: lpro...@cix.co.uk - Google
On 2/14/20 1:54 PM, jim stephens via cctech wrote:
On 2/14/2020 6:09 AM, Alan Perry via cctalk wrote:
On Feb 14, 2020, at 04:15, Liam Proven via cctalk
wrote:
On Thu, 13 Feb 2020 at 19:06, Alan Perry via cctalk
wrote:
I supplied part numbers. How can I be more specific?
Oddly,
On 2/14/2020 11:11 PM, Alan Perry via cctech wrote:
On 2/14/20 1:54 PM, jim stephens via cctech wrote:
On 2/14/2020 6:09 AM, Alan Perry via cctalk wrote:
On Feb 14, 2020, at 04:15, Liam Proven via cctalk
wrote:
On Thu, 13 Feb 2020 at 19:06, Alan Perry via cctalk
wrote:
I
14 matches
Mail list logo
