[cctalk] Re: need a 5150 motherboard

2024-03-29 Thread Gregory Beat via cctalk
MTM Scientific (Clinton, MI) offered modern redrawn IBM PC 5150 base board and a Full Kit, at one time. https://www.mtmscientific.com/pc-retro.html While he is no longer selling separate blank 5150 boards, you could inquire about Gerbers. greg w9gb

[cctalk] Re: Unknown Viewsonic monitor flashes Red-Blue-Green-White

2023-12-02 Thread Gregory Beat via cctalk
Viewsonic 22 inch VX2262wm widescreen LCD VGA up to 1680 x 1050 resolution, VIDEO Response as fast as 2ms. Viewsonic LCD VX2262wm (brochure) https://www.viewsonic.com/eu/products/sheet/VX2262wm === It was apparently indeed in a self-test mode. When I fed it, it actually worked well. When I loo

[cctalk] Re: IBM PS/2 Model 80 (8580-071) restoration

2023-03-09 Thread Gregory Beat via cctalk
It has been a long-time (almost 40 years now) since I worked part-time at an IBM dealer, BUT attended ALL the IBM hardware training (and later as an early corporate PC center manager), including the wonderful OS/2 presentations. I also selected that IBM model for my father’s business software, w

Re: HP9825 internal ROM?

2022-05-05 Thread Gregory Beat via cctalk
Curious Marc has a complete set of YouTube videos on his restoration of the HP 9825, due to Power Supply failure (no crowbar) damaging a number of ICs. The Last video of the series shows fabricated of the PC Board for it’s missing Crowbar Circuit. https://youtu.be/gIfJ30fPAOw HP 9825 Crowbar Pr

Re: Need picture of power supply mounted in 11/40 cabinet

2021-12-06 Thread Gregory Beat via cctalk
Power Supplies, due to their Weight, are placed at the bottom of Racks (prevent tip overs / weight distribution). https://avitech.com.au/?page_id=366 The PDP-11/70 Maintenance and Installation Manual (EK-11070-MM-002) explains that the basic PDP-11/70 system components are located in a double ca

Re: cctech Digest, Vol 87, Issue 3

2021-12-05 Thread Gregory Beat via cctalk
Power Supplies, due to their Weight, are placed at the bottom of Racks (prevent tip overs — weight distribution). https://avitech.com.au/?page_id=366 The PDP-11/70 Maintenance and Installation Manual (EK-11070-MM-002) explains that the basic PDP-11/70 system components are located in a double ca

Re: IBM transistor replacements

2021-11-27 Thread Gregory Beat via cctalk
Al - The Texas Instruments (TI) 139 is likely a 2N139 PNP (BJT) transistor, capable of high speed switching (in that era). The 2N139 was originally an RCA transistor (tall cylinder) found in RCA and GE transistor radios (455 kHz IF section). The TI versions were low profile metal case, TO-33 ca

Re: Ken Gielow passed away

2021-11-19 Thread Gregory Beat via cctalk
Ken Gielow sold his Z80DIS (Z80 disassembler) for CP/M 80 as shareware ($20) thru his Butler, PA firm (SLR Systems), until the end of the 1980s. I left Slippery Rock (just north of Butler) in the summer 1983 (about time of release). — Info World, October 24, 1983 Software Review by Steve Mann htt

Memorex Telex IDE 711186669587 ISA controller

2021-06-15 Thread Gregory Beat via cctalk
The recently acquired a Memorex Telex IDE ISA controller (early 1990s), number 711186669587 , that has an unpopulated floppy / tape controller area on the board. The board has 34-pin internal header and DC-37 for external drive. I would like to populate those missing components on the PC board.

Re: [cctalk] WTD - Jupiter Ace plastic rivets

2020-12-06 Thread Gregory Beat via cctalk
Phil - Search for Push-In Rivets (plastic, nylon, etc.). Two of the largest mfg. of plastic Push Rivets are just east (Richco, River Forest, IL) and north (Fastex, Des Plaines, IL) of me. Both have been acquired by larger conglomerates. — Richco (River Forest) was bought by Essentra Components

Re: Identifying a Mystery ISA Card

2020-10-17 Thread Gregory Beat via cctalk
Sean - You might get lucky, IF Jameco still has documentation & software for the board. I would guess circa 1982-1985 (after IBM XT introduction with 256 kB standard). — Japan in 1970s and Taiwan in 1980s ... had major production issues with PCB fabrication and assembly (required higher QC in sour

Re: Identifying a Mystery ISA Card

2020-10-16 Thread Gregory Beat via cctalk
BTW - IF you look at advertisements in the 1985-86 PC magazines, this was typical: PC Network (Mail-Order/Telephone reseller). PC NETWORK SIX-PACK“ CLONE with 0K $89.00* Full Six-Pack“ Features —Game Port Standard. Direct Import from Taiwan at a Fabulous Price! == The “unknown” is whether the

Re: Identifying a Mystery ISA Card

2020-10-16 Thread Gregory Beat via cctalk
Sean, Fred, and Glen — Sorry, late to this ISA card thread. I worked in Tech Support for an Apple/IBM/HP/Novell retail computer dealer, during summers in early 1980s, when in Graduate school. So I saw the “wide selection” of add-in cards for IBM PC/XT and compatibles. == This is a “Taiwanese gene

Re: Broken VT510

2020-07-26 Thread Gregory Beat via cctalk
As noted, in another reply, the DEC VT-5xx terminal series was mfg. by ADDS. Boundless Technologies (former ADDS) shutdown sales a few years ago. They will service & supply parts, as long as inventory of proprietary parts exists. http://www.boundlessterminals.com/ Boundless Technologies 1916 Sta

Re: [cctalk] Replacing the Flyback Transformer From My VAXmate

2020-05-18 Thread Gregory Beat via cctalk
Rob - It has been 35+ years since I worked for an Apple dealer, during the Macintosh announcement (and Apple sales, service training). I no longer have any of those documents. The Apple Community is extensive, and a quick Google search turned up many comments about Flyback, Damping Diode, &

[cctalk] Re: Replacing the Flyback Transformer From My VAXmate

2020-05-18 Thread Gregory Beat via cctalk
Tai-Ho (Taiwan) was the OEM supplier for flyback transformers used by Apple in the early Macintosh computers (1984+). Russell Industries (New York, USA) produced replacement flyback transformers for monitors and TVs, these appear on eBay and remaining TV repair supply houses. As noted, while t

Re: [cctalk] Replacing the Flyback Transformer From My VAXmate

2020-05-18 Thread Gregory Beat via cctalk
Rob - A DEC Part Number would speed up your Part Search. Radwell, a surplus dealer in New Jersey, lists a DEC terminal Flyback Transformer. DEC Part number: 16-27975-01 (supposedly used in the DEC VT320 terminal) https://www.radwell.com/en-US/Buy/MONITOR%20TECHNOLOGIES/MONITOR%20TECHNOLOGIES/1

Re: HP 9000 Series 360 Thin LAN

2020-02-22 Thread Gregory Beat via cctalk
Some days I feel like “Doc Brown”, wondering where I parked the DeLorean. — YES ... connecting your HP 9000 to your private LAN would be useful. ThinNet = 10-Base-2 = 10 MB Ethernet over RG-58/U 50 ohm coaxial cable. The Series 360 workstation should also have an AUI port (15-pin D-subminiature w

Re: SWTPC 6800 and Percom Floppy Controller

2020-01-08 Thread Gregory Beat via cctalk
Mike - Cer-Comp 5566 Ricochet Avenue Las Vegas, NV 89110 (702) 452-0632 William E. Vergona wrote firmware on those two (2), 2708 ROMs. He later (1980s) worked with Tandy (Coco-3) Color Computer products. == ‘68 Journal, May 1980 (Back to Future, 40 years later) MiniDisk+ DOS , Pages 11 - 13 http:/

Re: RCA 1802s available

2019-12-18 Thread Gregory Beat via cctalk
Harris still manufactures the RCA/Intersil/Harris 1802 processor. I do not know if the Silicon on Sapphire (SoS) process versions (Sandia Labs, radiation hardened) are still used by DoD. https://en.wikipedia.org/wiki/RCA_1802 Alltronics Harris CDP1802ACE (3.2 MHz, 5 Volts) $4.95 https://www.allt

Re: [cctalk] First transistors

2019-10-29 Thread Gregory Beat via cctalk
Jack Ward would be happy to include in the museum collection. http://semiconductormuseum.com/Museum_Index.htm Helped Jack over a decade ago, to document the usage of transistors in Explorer I. He did oral history interview with Dr. George Ludwig before he passed in 2013. http://semiconductormus

Re: [cctalk] Looking for front panel switch

2019-10-06 Thread Gregory Beat via cctalk
I did find a candidate switch, at Surplus Sales of Nebraska for $5.00 http://www.surplussales.com/switches/SWToggle-1.html (SWT) 8V10128 Microswitch SPDT toggle switch. 25 ma @ 20vDC. PC mount. ON-ON. 0.5" x 0.9"L Blue Paddle. Microswitch Co. was started by Burgess Battery (Freeport, IL) in 1930s

Re: [cctalk] Looking for front panel switch

2019-10-06 Thread Gregory Beat via cctalk
Electronic Surplus Cleveland https://www.electronicsurplus.com/ Honeywell switch, might work with your actuator https://www.electronicsurplus.com/honeywell-microswitch-8v1012b-m-switch-rocker-spdt-25ma-20vdc gb Sent from iPad Air

Re: [cctalk] Looking for front panel switch

2019-10-06 Thread Gregory Beat via cctalk
Many of the classic Rocker & Lever Actuator switches from the 1960s & 1970s were discontinued, due to industry consolidation (M&A) in 1990s and the convert or obsolete decisions (RoHS compliance), a decade later. This likely means you will need to “adopt” to current offerings == OR == plow thr

Re: So what the heck did I just pick up?

2019-08-31 Thread Gregory Beat via cctalk
Beautiful front panel (1970s design). It would make a nice front panel for a DIY Computer. — It is an RS-423 control/switch panel. RS-423 is an EIA/TIA serial communications standard, BUT there is no common pinout (standard) for RS-423. == RS-232 was defined in 1962 by the Electronics Industr

Re: DECserver 700 PSU fix, H7881-AA

2019-02-25 Thread Gregory Beat via cctalk
Adrian - ASTEC is now owned by Emerson Power (UK address below). Emerson Power Catalog (find the 57 watt models): https://www.mouser.com/catalog/supplier/library/pdf/Emersonpower_catalog.pdf PowerClinic in Dallas/Fort Worth area services a large number of Switch-Mode power supplies. http://porta

Re: N8VEM and z80sbc project

2018-12-06 Thread Gregory Beat via cctalk
In 2015 the content of N8VEM projects were migrated to RetroBrewComputers.org (RBC). https://www.retrobrewcomputers.org/doku.php Active support for N8VEM and later RBC projects found at RetroBrew Computers Forum. https://www.retrobrewcomputers.org/forum/index.php?t=thread&frm_id=1&; The N8VEM

Re: 34 pin Card Edge “Male to Male” Connector

2018-11-28 Thread Gregory Beat via cctalk
Card Edge Connectors are PC Board to Wire Connectors. The 34-pin version was popular for control board on 5-1/4” floppy drives in 1980s. https://en.m.wikipedia.org/wiki/Edge_connector I have not seen commercial PC board widgets used as an interconnect. gb == Date: Tue, 27 Nov 2018 14:56:18 -050

Re: Identifying TO-3 w/HP house numbering

2018-10-17 Thread Gregory Beat via cctalk
Josh - You may want to contact Denis Kohlhagen, at Butler Winding. IF this is for the preservation of an HP terminal in the museum, they may wish to assist in rebuild/rewinding that flyback. There are US firms that can perform this work, and publicity of preserving history is desired by some

Re: Ethernet names...

2018-10-03 Thread Gregory Beat via cctalk
Grant - Occasional vague references to “I”, when Ethernet II was used (as I remember). I assumed the reference was for initial 3 Mbps work at PARC. Gateway Communications started in Irvine, CA (1981?) offering G/Net (~double the 3 Mbps), I remember installing their demonstration system (1982 or 1

Re: Clock batteries...

2018-08-05 Thread Gregory Beat via cctalk
Not exactly. The TL-5242 is more than 3 times the price and chemistry difference. I assume you do not desire to replace the Lithium Coin Cell ? or can’t find? Tadrian TL-5242-W Lithium battery https://www.mouser.com/ProductDetail/Tadiran-Batteries/TL5242W?qs=Yk42LiOZU8T3HaRcWXYg9A%3D%3D Data sh

Re: Unknown Z80 CPU board and backplane ID anyone?

2018-07-31 Thread Gregory Beat via cctalk
Agree about Varian trademark. In 1937 the Varian brothers developed the Klystron tube. In 1965 Eitel-McCullough (EIMAC) merged with Varian Associates, but in 1995 the EIMAC division was “spun off” (now part of CPI). In 1999, the company was reorganized into three distinct businesses: Varian Medic

Re: RL02 Replacement indicator bulbs

2017-06-19 Thread Gregory Beat via cctalk
CM73 is preferred, due to its ~ 15,000 hour operating life. CML Datasheet http://www.farnell.com/datasheets/9986.pdf?_ga=2.221200730.354234894.1497893544-1697820496.1468261067 gb Sent from iPad Air

Re: RL02 Replacement indicator bulbs

2017-06-18 Thread Gregory Beat via cctalk
Incandescent Lamps Determine BASE Type and Voltage. Additional criteria: Filament type; brightness; expected hours (life) Chicago Miniature Lighting (CML) https://www.cml-it.com/ > Hi everyone, > > Can anyone suggest a source of replacement indicator bulbs for an RL02 drive? > Are they fairl

Re: Reviving VT220?

2017-04-29 Thread Gregory Beat via cctalk
The High Voltage capacitors 600 to 2,000 VDC have a finite life. Unless you checked for leakage or ESR be suspect of values in range. Since you are in the UK, Farnell/element14 may be the best parts distributor. ASC Metalized Polyester Film, 6 kVolts http://www.justradios.com/ASCcapacitors.h

Re: Reviving VT220?

2017-04-28 Thread Gregory Beat via cctalk
For your education, Google search "Flyback transformer" There are a number of rebuilders, replacements, and substations. B&H Electronics https://www.bhelectronics.com/products/dc-dc-power-products/isolated-flyback-transformers.html Pactran http://pactran.com/why-pacific-transformer/?gclid=CNWWzL

RE: DEC wall plates, cables

2017-04-08 Thread Gregory Beat via cctalk
Paul, Are these the "offset clip" RJ-12 6p6c modular jacks? https://www.showmecables.com/dec-rj12-6p6c-modular-plug-flat-cable greg chicago Sent from iPad Air

Re: HP 9000/382 Questions

2017-03-19 Thread Gregory Beat via cctalk
Just threw out all of my HP/UX v9 training manuals from that era, last year. Reliable machine for the era when Intel 80386/80486 were the top processors. greg Sent from iPad Air