Hi List
I have here a Acer-Altos System 4500. It is a 486/33 EISA System with an
Altos Basic SCSI Bsc(e) Controller.
It has an Altos Multidrop/2 EISA Controller (to controll TCU Boxes that
handle RS232 Ports) and a VGA1024i EISA Graphics controller.
My mision is to bring that System back to l
Hi Josh,
i have restored last year a PDP-8/a to and had the same experience like you
with the Powersuppy. I felt also wiered about the bang in the transformer in
the moment of switching it on.
Marco
> Am 09.06.2020 um 09:02 schrieb Josh Dersch via cctalk :
>
> Hi all --
>
> I'm working on a
Hello alltogether,
i am restoring a PDP8A at the moment. The machine got a problem in the
Powersupply. I think one of the emergency ciruits trigger a shutdown of
PSU. In tracing this isue i hab two questions.
My 8A`s manufacturing year is 1977. It`s model is 8A620. On Bitsavers i
found a mat
Thanks for your quick answer!
Hardware support say no support for LCG Graphics :-(
Marco
Am 17.12.2017 um 12:47 schrieb Aaron Jackson:
1.) It is not posible to switch the console from RS232 to the VGA
Monitor and Keyboard. If i switch the S3 switch in down position i can
only see the NetBSD K
Hello List,
i playing arround with my Vaxstation 4000 60
This is a System with 40 MB Ram, 1GB Hdd, a VGA Monitor, LK201 Keyboard,
VSXXXAA.B03 Mouse, and a external SCSI-CDROm dirve.
With OpenVMS installed on it i have the grafical DecWindows System running.
Now i have installed NetBSD 7.
I have the same problem with a cheap 19" LCD VGA Screen. What i made is
to seperate the required sync signal with an LM1881 Video Sync
Seperator. I used the standard application from the TI datasheet.The
only difference is that i used an viariable resistor on pin 6 to adjust
to the Sync Frequen
Yes, please... I am also reistered my interest...
Marco
Am 03.10.2017 um 09:17 schrieb Ed via cctalk:
please send into to us as well...
thanks ed#
In a message dated 10/3/2017 12:12:53 A.M. US Mountain Standard Time,
cctalk@classiccmp.org writes:
On 10/1/2017 4:17 PM, SYLVIA MCMAHO
