Eugene,
> Jonas, I am using an SD card, not CF because I need to move files from a
> laptop to this computer using the SD. Having said that, I suspect
> everything you said is still true. I don't have access to any linux. But
> do you think I could make a 300MB partition (for example) on the
Discussion: On-Topic and Off-Topic Posts
Cc: cct...@classiccmp.org
Subject: Re: IDE-SD adapter question
Hi Eugene,
On Fri, Jun 26, 2020 at 09:39:57PM +, W2HX via cctalk wrote:
> Hi all,
> However, I do get errors "sector not found" and if I A)bort I get INT 24
> error.
On Sat, 27 Jun 2020, W2HX via cctech wrote:
> Peter and Maciej. Thank you very much for the input. I don't believe
> this BIOS supports anything other than CHS. At least I don't see a way
> to toggle between CHS and LBA. Is this what I should be looking for? An
> option to enable LBA mode?
Hi Eugene,
On Fri, Jun 26, 2020 at 09:39:57PM +, W2HX via cctalk wrote:
> Hi all,
> However, I do get errors "sector not found" and if I A)bort I get INT 24
> error. I am trying to get windows 95 installed and this is certainly
> preventing that.
> In the BIOS settings I have the hard
On 27/06/2020 16:34, W2HX via cctech wrote:
I am not opposed to going to CF, but I have no other computers that have a CF
port, thus I have no way to move files onto this 486 computer.
That well known auction site lists CF->PC Card, CF->SATA, CF->laptop
40-pin IDE and CF->ATA adapters for
solution might be IDE-CF card for the 486 and maybe a
corresponding USB-CF for my daily PC for file transfer?
Eugene
-Original Message-
From: cctech On Behalf Of Peter Corlett via
cctech
Sent: Friday, June 26, 2020 6:15 PM
To: General Discussion: On-Topic Posts
Subject: Re: IDE-SD
On Sat, 27 Jun 2020 at 02:30, W2HX via cctech wrote:
>
> Could it be related to the fact that it is a 2GB SD card and I believe IDE
> controllers of that day could only address something like 500MB?
It could well be, yes.
> Should I consider trying to partition the SD card into a 500MB
; General Discussion: On-Topic Posts
Subject: Re: IDE-SD adapter question
Off hand, I wonder if the 486 doesn't support logical block addressing in the
BIOS (or its not enabled). Modern machines (and those of a Windows 95 vintage)
do not use CHS addressing (cylinder, head, sector) any longer.
SD
On Fri, 26 Jun 2020, W2HX via cctech wrote:
> Thanks for previous help on this project. I am working on an old 486
> computer and I have replaced a 40 pin IDE hard drive with this SD
> adapter...
> https://www.amazon.com/gp/product/B07G29TZPS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8=1
There
On Sat, 27 Jun 2020, W2HX via cctech wrote:
> Could it be related to the fact that it is a 2GB SD card and I believe
> IDE controllers of that day could only address something like 500MB?
Except for a few sophisticated caching host bus adapters and ATA RAID
controllers that presented their
Hi all,
Thanks for previous help on this project. I am working on an old 486 computer
and I have replaced a 40 pin IDE hard drive with this SD adapter...
https://www.amazon.com/gp/product/B07G29TZPS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8=1
In general it seems to mostly be working. I can see
remapping
the firmware does.
Rich
Get Outlook for iOS<https://aka.ms/o0ukef>
From: cctech on behalf of W2HX via cctech
Sent: Friday, June 26, 2020 5:39:57 PM
To: cct...@classiccmp.org
Subject: IDE-SD adapter question
Hi all,
Thanks for previous help on this p
12 matches
Mail list logo
