> -Original Message-
> From: Maciej W. Rozycki [mailto:ma...@linux-mips.org]
> Sent: 01 August 2017 19:38
> To: r...@jarratt.me.uk
> Cc: 'General Discussion: On-Topic and Off-Topic Posts'
>
> Subject: RE: Reset NVRAM on DECstation 5000/240
>
> O
On Mon, 31 Jul 2017, Rob Jarratt wrote:
> > It is. Check the "DECstation/DECsystem 5000 Model 200 Series Maintenance
> > Guide" (EK-PM38C-MG-002), available online.
> >
>
> I have that manual. Having checked again I realise I should have searched
> for "NVR" and not "NVRAM", then I would have
> -Original Message-
> From: Maciej W. Rozycki [mailto:ma...@linux-mips.org]
> Sent: 31 July 2017 14:26
> To: r...@jarratt.me.uk; Rob Jarratt ; General
> Discussion: On-Topic and Off-Topic Posts
> Subject: Re: Reset NVRAM on DECstation 5000/240
>
> Hi Rob,
>
Hi Rob,
> I am trying to get my new 240 going. Unfortunately all the diagnostic LEDs
> stay lit. From when I had a previous DECstation 5000/240 I found a note that
> I fixed this by resetting the NVRAM with a jumper.
>
>
>
> Unfortunately I did not record which jumper where, and I can't find m
I am trying to get my new 240 going. Unfortunately all the diagnostic LEDs
stay lit. From when I had a previous DECstation 5000/240 I found a note that
I fixed this by resetting the NVRAM with a jumper.
Unfortunately I did not record which jumper where, and I can't find mention
of this in any o