On Wed, Dec 8, 2021 at 2:43 AM Jos Dreesen via cctalk
wrote:
> >Also, when the tapes arrive, are there recommendations in case their
> > drive belts are gone?
>
> You can 3D-print replacements.
> Use Innoflex filament, 100% fill-in and the following OpenScad formula :
>
> module ring(d1,d2,w)
which Innoflex filament? There are several different hardness variants.
I used Ninjaflex 3DNF0517505, but that is because it is the only TPU type
filament I have at hand.
I would rather use a somewhat harder variant.
Jos
On Wed, Dec 8, 2021 at 8:43 AM Jos Dreesen via cctalk
wrote:
>
>
> >
> >Also, when the tapes arrive, are there recommendations in case their
> > drive belts are gone?
>
> You can 3D-print replacements.
> Use Innoflex filament, 100% fill-in and the following OpenScad formula :
>
which Innoflex
On Tue, Dec 7, 2021 at 10:38 PM Jan-Benedict Glaw via cctalk
wrote:
> However, when I checked the two drives capstans, they're old. One
> has a crack, and as things go, they feel partially either hard or
> gooey. Are there recommendations to exchange these for new ones?
I turned a replacement
Also, when the tapes arrive, are there recommendations in case their
drive belts are gone?
You can 3D-print replacements.
Use Innoflex filament, 100% fill-in and the following OpenScad formula :
module ring(d1,d2,w)
{
difference()
{ cylinder( w, d1/2, d1/2, $fn=230);
cylinder( w
On 12/7/2021 4:38 PM, Jan-Benedict Glaw via cctalk wrote:
Hi!
Some time ago, I got my hands on a DECtape II, though no tapes.
That'll change after a long time and in a few days, even multiple
tapes will come in.
With that drive, I started some first tests. It's PSU seems to be
all fine, prov
Hi!
Some time ago, I got my hands on a DECtape II, though no tapes.
That'll change after a long time and in a few days, even multiple
tapes will come in.
With that drive, I started some first tests. It's PSU seems to be
all fine, providing stable 5 and 12 V.
It's board's wire wrapping is in