On Tue, Oct 9, 2018 at 8:19 AM Noel Chiappa via cctalk <
cctalk@classiccmp.org> wrote:
> > From: Paul Anderson
>
> > I don't remember the D tilting.
>
> http://gunkies.org/wiki/File:BA11-DSide.jpg
>
> This is very similar to the slides on the BA11 (-11/20), which also had the
> rotation, s
> From: Paul Anderson
> I don't remember the D tilting.
http://gunkies.org/wiki/File:BA11-DSide.jpg
This is very similar to the slides on the BA11 (-11/20), which also had the
rotation, so I suspect they were all this way (i.e. there no early versions
without, etc). Having said that, if
On Mon, Oct 8, 2018, 6:41 PM Noel Chiappa via cctalk
wrote:
> > From: Bill Degnan
>
> > What is the part number for the -D ?
>
> Do you have the inners? The only -D inners I know of are the kind shown
> here:
>
> http://gunkies.org/wiki/BA11-D_Mounting_Box
>
> and if you have those, you
Yep, just like the lower picture! It is indeed steel, I thought it was
aluminum from a quick look.
I'd prefer a set of original outer rails, but something newer or something
I have to modify a little would be fine.
Thanks,
Jonathan
On Mon, Oct 8, 2018 at 7:38 PM Noel Chiappa via cctalk <
cctalk@
Bill,
I think I have the outers for the BA11-D currently installed in the rack. I
know a PDP-11/05 lived in here at one point.
Thanks,
Jonathan
On Mon, Oct 8, 2018 at 6:41 PM Noel Chiappa via cctalk <
cctalk@classiccmp.org> wrote:
> > From: Bill Degnan
>
> > What is the part number for
> From: systems_glitch
> I do have the inner rails/latch system for tilting the box, they are
> plain aluminum.
Like the lower picture:
http://gunkies.org/wiki/BA11-K_mounting_box
there? I'm guessing that's zinc-plated steel.
Alas, I don't know who made those (may have been DEC
> From: Bill Degnan
> What is the part number for the -D ?
Do you have the inners? The only -D inners I know of are the kind shown here:
http://gunkies.org/wiki/BA11-D_Mounting_Box
and if you have those, you're in luck; the outers from a still-available
Chassis Track unit are perfect
I don't remember the D tilting.
On Mon, Oct 8, 2018 at 2:57 PM Bill Degnan via cctalk
wrote:
> While we are on the subject, I do need the part number of the -D version
> outer rails, the 11/05 11/10 chassis with power supply on the side. I have
> the inner rails with the tilt feature.
>
While we are on the subject, I do need the part number of the -D version
outer rails, the 11/05 11/10 chassis with power supply on the side. I have
the inner rails with the tilt feature.
On 10/8/18 9:47 AM, systems_glitch via cctalk wrote:
> It's the BA11-K with the H765 power supply on the back end. I do have the
> inner rails/latch system for tilting the box, they are plain aluminum.
They're molybdenum-coated steel. Aluminum would never hold up in that
application.
The D has a H750 PS on the right side.
Paul
On Mon, Oct 8, 2018 at 11:40 AM Bill Degnan via cctalk <
cctalk@classiccmp.org> wrote:
> >
> >
> > > Looking for a pair of rack rails for my PDP-11/10.
> >
> > Is it in a BA11-K (as suggested by the Subject line), or BA11-D?
> (-11/10's
> > came in
It's the BA11-K with the H765 power supply on the back end. I do have the
inner rails/latch system for tilting the box, they are plain aluminum. The
outer rails probably went with the rack.
Thanks,
Jonathan
On Mon, Oct 8, 2018 at 12:40 PM Bill Degnan via cctalk <
cctalk@classiccmp.org> wrote:
>
>
>
> > Looking for a pair of rack rails for my PDP-11/10.
>
> Is it in a BA11-K (as suggested by the Subject line), or BA11-D? (-11/10's
> came in both, for the 10-1/2" box.) The -K has the power supply on the end,
> the -D down one side.
>
>
> If you've got the inners, you're home free; I c
> From: systems_glitch
> Looking for a pair of rack rails for my PDP-11/10.
Is it in a BA11-K (as suggested by the Subject line), or BA11-D? (-11/10's
came in both, for the 10-1/2" box.) The -K has the power supply on the end,
the -D down one side.
What slide hardware, if any, do you alr
Looking for a pair of rack rails for my PDP-11/10.
Thanks,
Jonathan
15 matches
Mail list logo