On Mon, 2007-06-11 at 17:12 -0500, Dale wrote:
> Hi Jordi,
>
> Jordi Espasa Clofent wrote:
> > It seems a joke, but it isn't:
> >
> > man man(1)
>
> Valid response, and I don't take it as a joke :)
>
> Part of what I am looking for is to learn what commands I should
> concentrate on :) Once I
Robinson Tiemuqinke wrote:
...
This doesn't work, I think. the 'ksdevice=eth1' or
'ksdevide=link' ways don't work well, because the
kickstart process will write MAC addresses to
ifcfg-eth* files, and that will just leave headaches
to local disk boot.
I don't understand this.
Another proble
On Thu, June 14, 2007 12:27 am, Robert - eLists wrote:
> Greetings
>
> Part of this may be OT
>
> Anyone running CentOS 4 or 5 with the newer Dell 2950 servers?
>
> Mainly thinking in terms of basic Internet facing applications
>
> Anything special to report good or challenging?
>
> Any hardware or
Greetings
Part of this may be OT
Anyone running CentOS 4 or 5 with the newer Dell 2950 servers?
Mainly thinking in terms of basic Internet facing applications
Anything special to report good or challenging?
Any hardware or drivers issues?
Anything not to order as an option or not do?
Should
Thanks, By now I have solved it.
> iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT
> --to-port 3128
Which side is eth0 pointing to? LAN or Internet? If it's the Internet side
then you need to change the above to the LAN side.
U R RIGHT. eth0 is connected to INTERNET.
Hello,
I had installed CentOS 5.0 on my desktop PC having a Realtek 8180L
based PCI wireless card. Since the drivers for this chip are not
available in the kernel, I created RPMs for ndiswrapper-1.43 from the
source code and installed them. I could configure the wireless card
and use it but invar
On Tue June 12 2007 03:50, Indunil Jayasooriya wrote:
> And, Then, I did below command.
>
> iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT
> --to-port 3128
Which side is eth0 pointing to? LAN or Internet? If it's the Internet side
then you need to change the above to th
--- Mogens Kjaer <[EMAIL PROTECTED]> wrote:
> Guolin Cheng wrote:
> > Mogens,
> >
> > The Booting Sequence problem is described below:
> >
> > Two types of NICs are installed on one machine,
> BIOS/PXE boots from one
> > type, but after that Linux/Kickstart kernel detect
> another type NIC as
I did a "yum provides xbindkeys" and it does not find the package?
Where can I find xbindkeys?
Thanks
Jerry
I found it... I was expecting it to be in that big yum repository in the sky
but it wasnt.
binding keys works like a champ with this.
Jerry
___
Thanks Akemi,
I checked the /boot/grub/grub.conf file and it did have those lines.
Then I realised that I had to press a key to get into the sub-menu
giving the boot options! So all is well - thanks.
Andy
On Tue, 2007-06-12 at 14:30 -0700, Akemi Yagi wrote:
> On 6/12/07, Andrew Allen <[EMAIL PROT
I did a "yum provides xbindkeys" and it does not find the package?
Where can I find xbindkeys?
Thanks
Jerry
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Bart Schaefer wrote:
On 6/13/07, Robert Moskowitz <[EMAIL PROTECTED]> wrote:
It seems to be a timing problem. And I do not know what else.
This sounds similar to something I encountered after first installing
CentOS5.0 on my pavilion laptop. See thread "CentOS 5: GDM starts,
but console does
I am trying to bind keys on centos 5.
I want to run my own APP when I hit keypad 4 and a different APP when I
hit keypad 5.
I was looking at xmodmap but I dont see how to execute my own command?
I was looking in the gnome keyboard shortcuts but I dont see how to
enter a command it only lets
y
On 6/13/07, Robert Moskowitz <[EMAIL PROTECTED]> wrote:
It seems to be a timing problem. And I do not know what else.
This sounds similar to something I encountered after first installing
CentOS5.0 on my pavilion laptop. See thread "CentOS 5: GDM starts,
but console doesn't switch VTs" (which
You configure it as jetdirect on port 9001 ?
>I have a couple of MFC-5440CN units on my lan. I used the drivers from the
> brother website http://solutions.brother.com/linux/en_us/index.html to access
> the printers from Fedora Core 4 and Centos 5. The Windows boxes on the lan
> also acces
In the old centos 4 we had cpuspeed and we could send
a SIGUSR1 to it so the CPU would run at max speed.
In centos 5 cpuspeed is not running. (although running with cpuspeed -C
will go full speed)
what is the correct way now in centos 5 to on the fly say run at full
speed then sometime
later t
- "Farkas Levente" <[EMAIL PROTECTED]> escreveu:
> we've a few 10-20 server in a lan each has 4-8 hdd. we'd like to
> create one big file server on these server hard disks and we'd like to
> create it in a redundant way ie:
> - if one (or more) of the hdd or server fails the whole filesystem
>
I have never done this but this is where I would start
1 - raid - hardware/software scsi/ide - depending on your money/needs
(personally I like software w/ sata drives)
2 - 2 servers
3 - network raid 1 or rsync
4 - heartbeat to switch the servers when one goes down.
http://lcic.org/ha.html
On 6
On Wednesday 13 June 2007 11:34, devel wrote:
> Hello,
> Anyone know how to use this printer MFC-3340CN as remote lan printer (as
> windows).
I have a couple of MFC-5440CN units on my lan. I used the drivers from the
brother website http://solutions.brother.com/linux/en_us/index.html to access
On 6/13/07, Dave Augustus <[EMAIL PROTECTED]> wrote:
I use a Logitech 4000 on Centos 4.
ditto here. Works quite well on centos 5 also.
The only issue I've ever had was that this camera didn't like going
through my usb hub. Other than that it runs flawlessly.
--
During times of universal dece
It seems to be a timing problem. And I do not know what else.
Perhaps I need to do more tresting, but each test takes around 10 min.
I have to boot, see it fail to go into X, try something reboot
I have noticed that if I run pm-suspend and power back up, watch the
system hang, pull the
On Wed, 2007-06-13 at 12:29 -0400, Jerry Geis wrote:
> Any recommendations?
I use a Logitech 4000 on Centos 4.
Works Great!
Dave
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
hi,
we've a few 10-20 server in a lan each has 4-8 hdd. we'd like to create
one big file server on these server hard disks and we'd like to create
it in a redundant way ie:
- if one (or more) of the hdd or server fails the whole filesystem still
usable and consistent.
- any server in this farm can
Hi all,
Was wondering if anyone was using a webcam on centos 4 or 5?
I was thinking about getting one but wanted to make sure it will work.
Any recommendations?
Thanks,
Jerry
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/l
Hello,
Anyone know how to use this printer MFC-3340CN as remote lan printer (as
windows).
--
--
Publicidad http://www.pas-world.com
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Tue, 2007-06-12 at 17:57 +0100, Karanbir Singh wrote:
> Actually there is something like this running already, the 'issue' was
> me
> blocking the cluster stuff on a few bug reports in > release version
> stuff.
> Clearing it all out today.
>
> Apologies for the delay.
>
Does this mean that
On Wed, June 13, 2007 10:01 am, Steve Huff wrote:
>
> On Jun 13, 2007, at 10:46 AM, Brent DiNicola wrote:
>
>> The second issue is also with 4.5 but with Gamin. I have about 20
>> Linux
>> CentOS workstations that have been running nicely for several months
>> (almost years) and after the 4.5 upgr
On Jun 13, 2007, at 10:46 AM, Brent DiNicola wrote:
The second issue is also with 4.5 but with Gamin. I have about 20
Linux
CentOS workstations that have been running nicely for several months
(almost years) and after the 4.5 upgrade I have noticed that the
gam_server process with Gamin keeps
Greetings,
I have done a bit of searching and I have found that the 4.5 version of
Postfix is the following rpm: postfix-2.2.10-1.1.el4.i386.rpm. I had
previously had the CentOSPlus version with mysql compiled in and just
recently upgraded to 4.5 from 4.4, upon doing this.. the above RPM was
insta
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, Jun 07, 2007 at 01:13:30AM +0200, Ralph Angenendt wrote:
> Miguel Medalha wrote:
> > After about 5 seconds I had about 35500 occurrences of "samba-vscan" on
> > Google...
> >
> > Nevertheless, here you go:
> > ftp://ftp.suse.com/pub/projects/
Send CentOS-announce mailing list submissions to
[EMAIL PROTECTED]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.centos.org/mailman/listinfo/centos-announce
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reac
Hi All,
I tried installing SquidGuard in a CentOS 4.5 server
wit Squid as proxy from RPMForge but uninstalled it
since I am having it fails to configure it correctly
so I replace it using DansGuardian. But after
configuring it and restarting the squid including
start of dansguardian service, I obs
Hi,
On Tue, 2007-06-12 at 18:05 -0600, Craig Van Ham wrote:
> Why isn’t there a server ISO for Centos 5.0
It's planned to go into QA testing soon.
-- Daniel
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Tue, Jun 12, 2007 ve 08:41:36PM -0500, Dave Augustus napsal:
> > Why isn???t there a server ISO for Centos 5.0
> >
> >
> >
> > Craig
> >
>
>
> The ISO contains all the software needed for workstation or a server.
> *You* determine what the end result of your installation of Centos is by
> w
Guolin Cheng wrote:
Mogens,
The Booting Sequence problem is described below:
Two types of NICs are installed on one machine, BIOS/PXE boots from one
type, but after that Linux/Kickstart kernel detect another type NIC as
eth0 and trying to install from that unconnected NIC.
You don't need a
Mogens,
The Booting Sequence problem is described below:
Two types of NICs are installed on one machine, BIOS/PXE boots from one
type, but after that Linux/Kickstart kernel detect another type NIC as
eth0 and trying to install from that unconnected NIC.
A custom kernel is built to statically
Hi,
Any one know why the glibc-profile is obsoleted on
centos 5 (glibc 2.5)? I've checked the glibc.spec file
and find that the --disable-profile option is enabled
in the configuration command.
So how the original profiling functions are
implemented on glibc 2.5? Is there a new way to do the
s
Vincent Knecht kirjoitti viestissään (lähetysaika keskiviikko, 13. kesäkuuta
2007 09:48):
> > i did Google and also searched CentOS web-site and CentOS 5 Release
> > Notes but i did not find what GCC CentOS 5 uses. i need GCC 4.x for my
> > C++ based project work. what GCC version CentOS 5 uses as
38 matches
Mail list logo
