From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of William L. Maltby
>
> On Wed, 2007-08-29 at 16:38 -0400, Ross S. W. Walker wrote:
> > > From: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED] On Behalf Of
> > > [EMAIL PROTECTED]
> > >
> > >
>
> > ... does anybody knows how to s
On Sun, 2007-09-02 at 13:40 -0400, William L. Maltby wrote:
> On Wed, 2007-08-29 at 23:21 +0800, mcclnx mcc wrote:
> >
> Regardless, the others were right: you *did* need a crossover *until*
> you put an auto-sensing switch into the mix. I have one of these on my
s/auto-sensing/(possibly auto-sen
On Wed, 2007-08-29 at 23:21 +0800, mcclnx mcc wrote:
> setup IP address as "192.168.xxx.xxx" does NOT work.
> Someone say I need use "crossover" type of cable, but
> I don't have. I put a switch and coneect cable from
> each PC and it work fine.
Crossover cables are easy. I make my own straight-
On Thu, 2007-08-30 at 11:26 -0700, Steven Vishoot wrote:
> --- CentOS List <[EMAIL PROTECTED]> wrote:
>
> > >>
> >
> Doesn't Consultant = Salesperson ?
I can't resist...
Consultant = Expert = Ex (has been) + spurt (drip under pressure)
>
--
Bill
On Wed, 2007-08-29 at 16:38 -0400, Ross S. W. Walker wrote:
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of
> > [EMAIL PROTECTED]
> >
> >
> ... does anybody knows how to setup a
> > software linux RAID on a proliant DL320 G4?
>
>
> When I setup my OS HD in a RAID1 I
On 9/2/07, Alain Spineux <[EMAIL PROTECTED]> wrote:
> And what about a
> raw disk tape to raw tape copy ?
ops
raw disk to raw tape copy ?
>
> # dd if=/dev/sda of=/dev/nst0 bs=32k count=32768
and with time :-)
# time dd if=/dev/sda of=/dev/nst0 bs=32k count=32768
>
> PS: 14 disk in raid 0 is ver
Dan Dansereau wrote:
My apology for cross posting
We have a DELL6850 with 8Gbytes of memory, four 3.2Ghz CPU's , perc 4
raid controller, with fourteen 300Gbyte 10Krpm disk on a powervault
220s, And a powervault 124T LTO-3 tape systems on a separate
160Mbyte/sec adaptec SCSI card.
The disks are
And what about a
raw disk tape to raw tape copy ?
# dd if=/dev/sda of=/dev/nst0 bs=32k count=32768
PS: 14 disk in raid 0 is very fragile, this should be used only for
caching data. With a PV220 maybe a backup engine then !
On 9/2/07, Dan Dansereau <[EMAIL PROTECTED]> wrote:
> My apology for cros
On Thu, 2007-08-30 at 19:39 +0200, Tomas Ruprich wrote:
> Thu, Aug 30, 2007 ve 06:05:49PM +0200, Tomas Ruprich napsal:
> > Greetings,
> > i had a following problem, which on one side i have already solved, but
> > on other side i don't thing it should behave this way and wish somebody to
> > tell
My apology for cross posting
We have a DELL6850 with 8Gbytes of memory, four 3.2Ghz CPU's , perc 4
raid controller, with fourteen 300Gbyte 10Krpm disk on a powervault
220s, And a powervault 124T LTO-3 tape systems on a separate
160Mbyte/sec adaptec SCSI card.
The disks are configured as two 2Tby
John Hinton wrote:
Is this really not in CentOS 5? or maybe buried in javaland somewhere?
thanks,
John Hinton
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Hi,
You might want to take a look at mod_proxy_ajp
I have made an extended Getting started guide to NTX, its in about 50 pages.
Its available in both English and Norwegian. The english version is
available at http://www.nnortux.net and the Norwegian version is available
at http://www.nnortux.no
Enjoy
On 7/12/07, Tronn Wærdahl <[EMAIL PROTECTED
On Sun, 2007-09-02 at 14:21 +0200, Daniel de Kok wrote:
> The CentOS team is pleased to announce the creation of its first Special
> Interest Group (SIG): the Virtualization SIG. A SIG is a smaller group
> within the CentOS project that focuses on a small set of issues, in
> order to either create
Siva GNU/Linux wrote:
Hi
I am using CentOS 5 64bit, i can install successfully on the below
hardware. while booting i can see the Pointer and use Mouse. But While
i get a Login screen I couldn't see the pointer, after login also i
can't. when i press CTRL button, it shows where the pointer is.
14 matches
Mail list logo