Pitshou Asingalembi wrote:
the hp smart array 6400 controller.
thats a raid controller. are you sure it supports plain scsi devices
like tape?many raid controllers are disk only, and for things like
tape drives, you need a seperate plain scsi port.
_
Pitshou Asingalembi wrote:
the hp smart array 6400 controller.
Using the cciss driver?
yum install kernel-doc
Read /usr/share/doc/kernel-doc-2.6.18/Documentation/cciss.txt
There's a section on how to enable the tape drive.
Mogens
--
Mogens Kjaer, Carlsberg A/S, Computer Department
Gamle Car
Pitshou Asingalembi wrote:
> the hp smart array 6400 controller.
It's usually not a good idea to connect a tape drive to a
raid controller. The 6400 is made to be connected to something
like a MSA20/MSA30 (JBOD SCSI shelf)
Send the output of the command 'dmesg'.
But I think you need to get anoth
the hp smart array 6400 controller.
--- En date de : Ven 11.7.08, nate <[EMAIL PROTECTED]> a écrit :
De: nate <[EMAIL PROTECTED]>
Objet: Re: [CentOS] tape drive
À: centos@centos.org
Date: Vendredi 11 Juillet 2008, 8h17
Pitshou Asingalembi wrote:
> yes,
> when the computer reboots, i saw the ta
Gopinath Achari a écrit :
Hi,
I am trying to install windows XP on XEN. The Base operating
system is
Centos 5.1 I used GUI tool Virtual Manager.
Once this Virtual manager is started is connected the XEN and QEMU.
i used new tab placed below to install a virtual OS ( ex. Winxp
Pitshou Asingalembi wrote:
> yes,
> when the computer reboots, i saw the tape drive as device detected. but i
> can not use it when i log on
What kind of scsi controller exactly? send the output of 'dmesg'
as well.
nate
___
CentOS mailing list
CentOS@c
yes,
when the computer reboots, i saw the tape drive as device detected. but i can
not use it when i log on
--- En date de : Ven 11.7.08, nate <[EMAIL PROTECTED]> a écrit :
De: nate <[EMAIL PROTECTED]>
Objet: Re: [CentOS] tape drive
À: centos@centos.org
Date: Vendredi 11 Juillet 2008, 7h51
Pitsh
Hi,
I am trying to install windows XP on XEN. The Base operating
system is
Centos 5.1 I used GUI tool Virtual Manager.
Once this Virtual manager is started is connected the XEN and QEMU.
i used new tab placed below to install a virtual OS ( ex. Winxp.)
after passing through th
Pitshou Asingalembi wrote:
> cat /proc/scsi/scsi gave me only the HDD, the st module was loaded by typing
> modprobe st but i don't have the st file under /dev.
Doesn't matter if the st module is loaded or not. If it's a SCSI
tape drive, and if it's connected to your SCSI controller, and if
the
cat /proc/scsi/scsi gave me only the HDD, the st module was loaded by typing
modprobe st but i don't have the st file under /dev.
--- En date de : Ven 11.7.08, nate <[EMAIL PROTECTED]> a écrit :
De: nate <[EMAIL PROTECTED]>
Objet: Re: [CentOS] tape drive
À: centos@centos.org
Date: Vendredi 11 J
Sean Carolan wrote:
Does the count field from "iptables -vnL RH-Firewall-1-INPUT" show
your REJECT rules being hit?
Yes, the rule gets hit and it returns an answer to the DNS query
anyway. I saw it increment from 10 to 11 when I ran the query:
11 692 REJECT udp -- * * 10.10
FYI for others who might encounter this.
I just did a yum update (C5.1) and after a very long download of packages I
get a transaction test failure:
Transaction Check Error:
file /usr/lib/libc-client.so.2007 from install of
libc-client2007-2007b-1.el5 conflicts with file from package
libc-c
On 7/10/08, Filipe Brandenburger <[EMAIL PROTECTED]> wrote:
> Did you update the "selinux-policy" package at the same time?
> Well, I'm almost positive that is what you are missing.
Filipe,
You nailed it. That was what I was missing.
Many thanks,
M
__
On Thu, Jul 10, 2008 at 10:42 PM, Robert Spangler
<[EMAIL PROTECTED]> wrote:
> Could you post /etc/sysconfig/iptables?
/etc/sysconfig/iptables doesn't necessarily reflect what is running
right now, and you can't include the counters with it.
An acceptable compromise would be posting the output of
On Thu, Jul 10, 2008 at 10:39 PM, Meenoo Shivdasani <[EMAIL PROTECTED]> wrote:
> To be more accurate, I installed the patched version of BIND which
> randomizes the source port to address the latest DNS vulnerability.
Did you update the "selinux-policy" package at the same time?
On my system I ha
On Thursday 10 July 2008 18:08, MHR wrote:
> In following up on the rsh "problem" I was having earlier, I decided
> to try out the suggestion Felipe sent about using
> system-config-securitylevel-tui to open up ports 513 and 514, but that
> doesn't seem to do the job, either.
>
> # iptables -
On 7/10/08, Meenoo Shivdasani <[EMAIL PROTECTED]> wrote:
> > SELinux is preventing BIND to open port UDP/16660. Did you configure
> > BIND to use that specific non-standard port?
>
>
> I installed the latest version of BIND which randomizes the source
> port...do you think that's the problem? I
> SELinux is preventing BIND to open port UDP/16660. Did you configure
> BIND to use that specific non-standard port?
I installed the latest version of BIND which randomizes the source
port...do you think that's the problem? If so, how do I get SELinux
to accept it?
M
__
On Thu, Jul 10, 2008 at 9:53 PM, MHR <[EMAIL PROTECTED]> wrote:
> [EMAIL PROTECTED] mrichter]$ rsh sushi ls
> sushi: Connection refused
Are you sure the daemons are up and listening on those ports? What
does "netstat -ltp" says on sushi?
Filipe
___
Cent
On Thu, Jul 10, 2008 at 9:41 PM, Meenoo Shivdasani <[EMAIL PROTECTED]> wrote:
> type=AVC msg=audit(1215740151.446:796): avc: denied { name_bind }
> for pid=21081 comm="named" src=16660
> scontext=root:system_r:named_t:s0 tcontext=system_u:object_r:port_t:s0
> tclass=udp_socket
SELinux is preven
listmail wrote:
On Thu, 10 Jul 2008 16:31:44 +0200, Kai Schaetzl wrote
Filipe Brandenburger wrote on Wed, 9 Jul 2008 23:08:44 -0400:
The exact same question came up two weeks ago.
And the answers were confusing at least me ;-)
To me as well, having now read the thread. N
>What you probably mean is:
># echo "ifdown eth0 && ifup eth0" | at now
Yea, sorry :) Op would have figured that out rather fast after
nothing "useful" happened
jlc
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/cent
Pitshou Asingalembi wrote:
> hi all,
> i want to use a compaq sdlt 320 under centos. the tape drive was already
> installed and after rebooting i was not able to see it(dmesg | grep tape or
> dmesg | grep scsi). i add the correct module (modprobe st) but i'm not able
> to use with mt. the st0 file
On Thu, Jul 10, 2008 at 6:43 PM, Spiro Harvey, Knossos Networks Ltd
<[EMAIL PROTECTED]> wrote:
>
> next you'll be telling me our internets shouldn't use tubes.
>
You're up to tubes? Hippy freak!
mhr
___
CentOS mailing list
CentOS@centos.org
http://list
On Thu, Jul 10, 2008 at 6:29 PM, Filipe Brandenburger
<[EMAIL PROTECTED]> wrote:
>
> Try using "iptables -vL", it will show you how many packets have
> matched that rule. Then try to rsh or rlogin and see if the numbers
> change. That should give you a clue to whether it's working or not.
>
Before
P.S.: Once again: although it's great that you are digging into the
problem, using iptables, and learning a lot on the process, you should
*REALLY* consider ditching rsh/rlogin and sticking to SSH. I would
consider using rsh/rlogin instead of SSH today about the same as using
gopher instead of the
> If it's SELinux related, have a look at /var/log/audit/audit.log, that
> will tell you what is being blocked in SELinux. That would be a good
> start. Let us know what you found there, then we might be able to help
> you a little more.
That's a huge help -- didn't occur to me to look in audi
Lanny Marcus wrote:
[EMAIL PROTECTED] ~]# ssh ipcop.homelan:222
ssh: ipcop.homelan:222: Name or service not known
[EMAIL PROTECTED] ~]#
Try:-
ssh -p 222 ipcop.homelan
Ian
smime.p7s
Description: S/MIME Cryptographic Signature
___
CentOS mailin
hi all,
i want to use a compaq sdlt 320 under centos. the tape drive was already
installed and after rebooting i was not able to see it(dmesg | grep tape or
dmesg | grep scsi). i add the correct module (modprobe st) but i'm not able to
use with mt. the st0 file is missing, can someone help to re
On Thu, Jul 10, 2008 at 6:08 PM, MHR <[EMAIL PROTECTED]> wrote:
> ACCEPT tcp -- anywhere anywherestate NEW
> tcp dpt:login
> ACCEPT tcp -- anywhere anywherestate NEW
> tcp dpt:shell
It seems right to me...
Try using "iptables -vL", it wi
On Thu, Jul 10, 2008 at 7:22 PM, Meenoo Shivdasani <[EMAIL PROTECTED]> wrote:
> I'm running up against a problem that seems to be related to SELinux.
> Any ideas?
If it's SELinux related, have a look at /var/log/audit/audit.log, that
will tell you what is being blocked in SELinux. That would be a
On Thu, Jul 10, 2008 at 5:19 PM, Joseph L. Casale
<[EMAIL PROTECTED]> wrote:
> # echo ifdown eth0 && ifup eth0 | at now
What you probably mean is:
# echo "ifdown eth0 && ifup eth0" | at now
Otherwise it will run "echo", and then it will run "ifup eth0" piping
its output to "at".
I don't see what
On 7/10/08, Lanny Marcus <[EMAIL PROTECTED]> wrote:
>> your
>> ipcop should be a caching nameserver. If you have another address there it
>> will query to that server.
>
> Obviously, I need to change that, so I can run Setup from a terminal
> window, run the dig + trace command as you did from one
On 7/10/08, Scott Silva <[EMAIL PROTECTED]> wrote:
> When you set up your connection to your provider, do you have a static
> address
> or dynamic?
Dynamic IP
> If static, you had to set your next step resolver in the config.
> If you are dynamic, you get what your provider sends with the dhcp r
On 7/10/08, Scott Silva <[EMAIL PROTECTED]> wrote:
> Do you want to install a complete router using CentOS?
> Is your ipcop box not adequate for your needs?
>From what you wrote to me in another reply, ipcop will do the job, as
soon as I can get into it and get it configured the way you said. That
On 7/10/08, Dennis McLeod <[EMAIL PROTECTED]> wrote:
> IPCOP here. Use it for Masq, dhcp, NAT, time, Transparent Webfiltering via
> URLFilter plugin (and automatic blacklist downloads) and banned internal MAC
> addresses (our inside machines) via advancedproxy plugin, and more.
> It's on our pu
Ruslan Sivak wrote:
> Does it just require a kernel recompile? Is there maybe one available
> somewhere?
No it requires changes to the kernel itself, changes which I don't think Red
Hat will introduce in a minor release as their current VM stuff is Xen based
which has it's own paravirtualization
On 7/10/08, Scott Silva <[EMAIL PROTECTED]> wrote:
> When you set up your connection to your provider, do you have a static
> address
> or dynamic?
We get a dynamic IP address when we connect to ADSL.
>If static, you had to set your next step resolver in the config.
> If you are dynamic, you get
nate wrote:
Ruslan Sivak wrote:
I'm using VMWare Server 2 RC1 to on top of CentOS 5.2 x86_64 running a
CentOS 5.2 i386 guest. I have enabled VMI in VMware, so I guess it
won't let me install if VMI wasn't available in the kernel? How do I
know whether VMI is supported/enabled and what perfo
R P Herrold wrote:
On Thu, 10 Jul 2008, Clint Dilks wrote:
I have been following the instructions here
http://wiki.centos.org/HowTos/JavaOnCentOS but trying to modify them
for jdk-6u7-linux-amd64.rpm but there doesn't see to be a compatible
java-1.6.0-sun-compat-*.rpm. Does one exist ?
What
Ruslan Sivak wrote:
> I'm using VMWare Server 2 RC1 to on top of CentOS 5.2 x86_64 running a
> CentOS 5.2 i386 guest. I have enabled VMI in VMware, so I guess it
> won't let me install if VMI wasn't available in the kernel? How do I
> know whether VMI is supported/enabled and what performance ben
Joseph L. Casale wrote:
Since I was SSHed into the boxes, I could not test ifconfig (down then
up!).
Just so you know, you can do this type of thing even with SSH.
(I don't know what would of helped that situation, but for future ref...)
#echo ifdown eth0 && ifup eth0 | at now
Oh, ne
On 7/9/08, MHR <[EMAIL PROTECTED]> wrote:
> On Wed, Jul 9, 2008 at 5:42 PM, nate <[EMAIL PROTECTED]> wrote:
>>
>> The next thing I suggest is stopping evolution, and killing all
>> evolution processes on the system and starting evolution again and
>> see if that fixes it.
I have killed Evolution a
I just set up a CentOS 5.2 system with bind9 (9.3.4-6.0.1.P1.el5) and
I'm running up against a problem that seems to be related to SELinux.
If I set named_disable_trans to 1, everything works as expected, but
if I leave it enabled the server will only give me data for the zones
for which it is auth
IPCOP here. Use it for Masq, dhcp, NAT, time, Transparent Webfiltering via
URLFilter plugin (and automatic blacklist downloads) and banned internal MAC
addresses (our inside machines) via advancedproxy plugin, and more.
It's on our public access wifi network with a dedicated DSL connection. Bee
On Thu, 2008-07-10 at 15:40 -0700, MHR wrote:
> On Thu, Jul 10, 2008 at 3:17 PM, Barry Brimer <[EMAIL PROTECTED]> wrote:
> > Quoting MHR <[EMAIL PROTECTED]>:
> >
> >>
> >> system-config-securitylevel-tui to open up ports 513 and 514, but that
> >> doesn't seem to do the job, either.
> >
> > I cou
I'm using VMWare Server 2 RC1 to on top of CentOS 5.2 x86_64 running a
CentOS 5.2 i386 guest. I have enabled VMI in VMware, so I guess it
won't let me install if VMI wasn't available in the kernel? How do I
know whether VMI is supported/enabled and what performance benefits can
I expect from
On Thu, 2008-07-10 at 15:39 -0500, Lanny Marcus wrote:
> On 7/10/08, Victor Padro <[EMAIL PROTECTED]> wrote:
> >
> I'm a Desktop user and Linux newbie. If I could use CentOS (which can
> do almost anything, if one knows how to do it), to replace our IPCop
> box, all I need it to do is: (a) Router
On Thu, Jul 10, 2008 at 3:17 PM, Barry Brimer <[EMAIL PROTECTED]> wrote:
> Quoting MHR <[EMAIL PROTECTED]>:
>
>> In following up on the rsh "problem" I was having earlier, I decided
>> to try out the suggestion Felipe sent about using
>> system-config-securitylevel-tui to open up ports 513 and 514,
on 7-10-2008 2:50 PM Lanny Marcus spake the following:
On 7/10/08, Scott Silva <[EMAIL PROTECTED]> wrote:
Bind as a caching nameserver is dead easy to install.
Just run "yum install caching-nameserver" and it will pull everything in.
Then "chkconfig named on & service named start"
Scott: Than
Quoting MHR <[EMAIL PROTECTED]>:
> In following up on the rsh "problem" I was having earlier, I decided
> to try out the suggestion Felipe sent about using
> system-config-securitylevel-tui to open up ports 513 and 514, but that
> doesn't seem to do the job, either.
I could be remembering this wr
In following up on the rsh "problem" I was having earlier, I decided
to try out the suggestion Felipe sent about using
system-config-securitylevel-tui to open up ports 513 and 514, but that
doesn't seem to do the job, either.
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source
On Thu, Jul 10, 2008, Lanny Marcus wrote:
>On 7/10/08, Scott Silva <[EMAIL PROTECTED]> wrote:
>
>> Bind as a caching nameserver is dead easy to install.
>> Just run "yum install caching-nameserver" and it will pull everything in.
>> Then "chkconfig named on & service named start"
>
>Scott: Thanks!
on 7-10-2008 2:32 PM Lanny Marcus spake the following:
On 7/10/08, Scott Silva <[EMAIL PROTECTED]> wrote:
Try dig +trace emcali.net
It should show all servers "your" query goes through.
Scott: Please note that I added ".co" (for Colombia) emcali.net.co
Is this showing which DNS Servers my
On 7/10/08, Scott Silva <[EMAIL PROTECTED]> wrote:
> Bind as a caching nameserver is dead easy to install.
> Just run "yum install caching-nameserver" and it will pull everything in.
> Then "chkconfig named on & service named start"
Scott: Thanks! I just began a text file: "Caching DNS Server" an
On 7/10/08, Scott Silva <[EMAIL PROTECTED]> wrote:
> Try dig +trace emcali.net
> It should show all servers "your" query goes through.
Scott: Please note that I added ".co" (for Colombia) emcali.net.co
Is this showing which DNS Servers my DNS requests use, or, which DNS
Servers serve their web
>Since I was SSHed into the boxes, I could not test ifconfig (down then
>up!).
Just so you know, you can do this type of thing even with SSH.
(I don't know what would of helped that situation, but for future ref...)
#echo ifdown eth0 && ifup eth0 | at now
through ssh will work fine, and you will
on 7-10-2008 2:04 PM Lanny Marcus spake the following:
On 7/10/08, Lanny Marcus <[EMAIL PROTECTED]> wrote:
I think I saw a reference, in a thread yesterday, about not having a
package with "caching" in it's name, if one also has BIND installed. I
am going to try to locate that thread and find o
On 7/10/08, Lanny Marcus <[EMAIL PROTECTED]> wrote:
> I think I saw a reference, in a thread yesterday, about not having a
> package with "caching" in it's name, if one also has BIND installed. I
> am going to try to locate that thread and find out about that package.
> Possibly it can do what I n
Sean Carolan wrote:
Yep. They are there. So what is the 'proper' method to get them out (other
than using VI and deleteing the lines?)?
I would comment them out and add another comment like this:
# Un-comment these to disable ipv6
#alias net-pf-10 off
#alias ipv6 off
You will need to
on 7-10-2008 1:55 PM Lanny Marcus spake the following:
On 7/10/08, Rob Townley <[EMAIL PROTECTED]> wrote:
why not use the dig command to query your isp dns system to see if
they forward requests to opendns. By the way, OpenDNS is a great way
to help prevent phishing attacks.
Rob: What other p
On 7/10/08, Rob Townley <[EMAIL PROTECTED]> wrote:
> why not use the dig command to query your isp dns system to see if
> they forward requests to opendns. By the way, OpenDNS is a great way
> to help prevent phishing attacks.
Rob: What other parameters or arguments I should add onto the dig
comm
on 7-8-2008 11:15 PM Robert - elists spake the following:
After digging for a bit at arin
Near as I can tell, it appears the authoritative dns servers for that
specific block are a lil messed up for the moment.
Not delegating something properly.
Tough to say without admin access to those machi
> Are you running tcpdump on the same machine that is doing the filtering?
> You do realize that tcpdump sees the packets as they come from the
> interface and before they are passed to the filter rules, right?
I had forgotten this important piece of information. Thank you for
pointing this out.
on 7-10-2008 1:11 PM Robert Moskowitz spake the following:
Sean Carolan wrote:
CRITICAL : [ipv6_test] Kernel is not compiled with IPv6 support
[ OK ]
FATAL: Module off not found.
CRITICAL : [ipv6_test] Kernel is not compiled with IPv6 su
On 7/10/08, Victor Padro <[EMAIL PROTECTED]> wrote:
> Hi there again...
> I just found this on my quest of DNS caching...
> http://isc.sans.org/diary.html?storyid=4687
Victor: I read that page and I sent the URL to the Supervisor in
Support at our ISP, hoping she will pass it along, to whoever is
On Thu, Jul 10, 2008 at 4:26 PM, Sean Carolan <[EMAIL PROTECTED]> wrote:
> You will need to reboot the server to enable the changes. IIRC, ipv6
> is not a module that you can load or unload anytime like a network or
> sound card driver.
No, not at all. If you just try to "ifconfig" after commenti
Sean Carolan wrote:
I'm attempting to block access to port 53 from internet hosts for an
internal server. This device is behind a gateway router so all
traffic appears to come from source ip 10.100.1.1. Here are my
(non-working) iptables rules:
-A RH-Firewall-1-INPUT -s 10.100.1.1 -m tcp -p tc
> Yep. They are there. So what is the 'proper' method to get them out (other
> than using VI and deleteing the lines?)?
>
I would comment them out and add another comment like this:
# Un-comment these to disable ipv6
#alias net-pf-10 off
#alias ipv6 off
You will need to reboot the server to enab
Sean Carolan wrote:
CRITICAL : [ipv6_test] Kernel is not compiled with IPv6 support
[ OK ]
FATAL: Module off not found.
CRITICAL : [ipv6_test] Kernel is not compiled with IPv6 support
Try looking inside /etc/modprobe.conf for these
I've used the guide on mantic.org before, worked well for me:
http://www.mantic.org/wiki/Installing_BackupPC
We use BackupPC extensively where I work, once you get it settled down
and in a steady state it is invaluable.
___
CentOS mailing list
CentOS@ce
> CRITICAL : [ipv6_test] Kernel is not compiled with IPv6 support
> [ OK ]
> FATAL: Module off not found.
> CRITICAL : [ipv6_test] Kernel is not compiled with IPv6 support
Try looking inside /etc/modprobe.conf for these lines:
alias net-pf
On Thu, 10 Jul 2008 16:31:44 +0200, Kai Schaetzl wrote
> Filipe Brandenburger wrote on Wed, 9 Jul 2008 23:08:44 -0400:
>
> > The exact same question came up two weeks ago.
>
> And the answers were confusing at least me ;-)
>
To me as well, having now read the thread. No one seems to know why the
I'm attempting to block access to port 53 from internet hosts for an
internal server. This device is behind a gateway router so all
traffic appears to come from source ip 10.100.1.1. Here are my
(non-working) iptables rules:
-A RH-Firewall-1-INPUT -s 10.100.1.1 -m tcp -p tcp --dport 53 -j REJECT
Hi..
I know this isn't a centos/rhel/fedora issue... but i'm hopeful that someone
might have an answer!!!
thanks
VV
Got a bit of an issue here, that I can't seem to resolve.
I have a test domain on a dynamic service (dyndns.org). the test domain is
foo.gotdns.com, which i have pointing
On Mon, Jul 7, 2008 at 10:19 PM, Akemi Yagi <[EMAIL PROTECTED]> wrote:
> On Mon, Jul 7, 2008 at 9:37 AM, Siju George <[EMAIL PROTECTED]> wrote:
>> Hi,
>>
>> Where do I get Yaz and libyaz package for CentOS 5?
>
> Try the EPEL repository. See
> http://wiki.centos.org/AdditionalResources/Repositorie
Tru Huynh wrote:
On Wed, Jul 09, 2008 at 08:42:12AM -0700, Chris Miller wrote:
I just had a customer's bind server lose all of it's local DNS records.
Yum updated the bind packages this morning at ~6am, and replaced the
original /etc/named.conf file, saving the old as named.conf.rpmsave. This
How did I get this?
I am current on my 5.2 upgrades on this system. Running kernel:
2.6.18-92.1.6.el5
I did a service network restart and got:
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
FATAL: Module
Sean Carolan wrote:
The awk output that was piped into to the sed command looks like this:
ajpv12://host1.domain.company.com:8008/root
ajpv12://host2.domain.company.com:8008/root
ajpv12://host3.domain.company.com:8008/root
___
CentOS mailing list
CentO
On Mon, Jul 7, 2008 at 4:05 PM, John R Pierce <[EMAIL PROTECTED]> wrote:
>
> man ssh-keygen
>
Unfortunately, as with most man pages, this gives the technical
details of how the command works, not so much how to use it in
context.
However, this
(http://rcsg-gsir.imsb-dsgi.nrc-cnrc.gc.ca/documents
So I do not want to run radvd on my public subnet (between the gateway
and firewall).
I am trying to set up the firewall's public interface. For now in
ifcfg-eth0 I have the lines:
DEVICE=eth0
BOOTPROTO=static
HWADDR=00:40:F4:05:A8:F1
IPV6INIT=yes
IPV6_AUTOCONF=no
IPV6ADDR="2607:F4B8:3:1:0:
2008/7/10 Ralph Angenendt <[EMAIL PROTECTED] <[EMAIL PROTECTED]>
>:
> Tolun ARDAHANLI wrote:
> > It can be created every second... Cause we do not know when the users
> want
> > to create these own keys...
>
> Then they have to wait - or look why your system doesn't have a big
> enough entropy poo
On Thu, 10 Jul 2008, Clint Dilks wrote:
I have been following the instructions here
http://wiki.centos.org/HowTos/JavaOnCentOS but trying to modify them for
jdk-6u7-linux-amd64.rpm but there doesn't see to be a compatible
java-1.6.0-sun-compat-*.rpm.Does one exist ?
What's wrong with the
on 7-10-2008 5:16 AM Sergio Belkin spake the following:
2008/7/9 Scott Silva <[EMAIL PROTECTED]>:
on 7-9-2008 1:08 PM John R Pierce spake the following:
Sean Carolan wrote:
Will there be a BIND patch available for this vulnerability, for CentOS
3.9?
http://www.kb.cert.org/vuls/id/800113
for
on 7-10-2008 3:23 AM Rudi Ahlers spake the following:
Johnny Hughes wrote:
Rudi Ahlers wrote:
Hi all
I've been thinking about using CentOS on a Dell R200 server and turn
it into a firewall / network monitor / traffic shaper in our
datacentre, instead of using a dedicated firewall device.
O
Remember this. It is going to work when set to Permisive regardless!!
John
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of David G. Mackay
Sent: Wednesday, July 09, 2008 10:36 PM
To: CentOS mailing list
Subject: RE: [CentOS] Latest samaba updates
On W
My ISP assigned prefix is: 2607:F4B8:3::/48
So I am building my internal IPv6 firewall/router/ etc.
I want to have a static IPv6 address on its eth0 so that I can create
static v6 routes to it from the gateway. I add the following lines to
ifcfg-eth0:
HWADDR=00:40:F4:05:A8:F1
IPV6INIT=yes
On 10-Jul-08, at 2:47 AM, Johnny Hughes wrote:
Not a exactly a guide, however there is a README.centos in the /usr/
share/docs/backuppc- dir that should tell you how to make
it work :D
hey, that is a start
Thanks!
Dustin
___
CentOS mailin
David Mackintosh wrote:
> Does anyone know what dhcpd (or the device) is trying to tell me with this
> message?
I believe it's saying the device was telling the server it didn't
want to use that IP anymore, and the server logged that it couldn't
find evidence that it leased that address out to t
Amitava Shee wrote:
> The issue is in CentOS 5. I ran the application successfully in Ubuntu 8.04.
>
>
> PCRE in CentOS does not have "unicode properties" enabled.
So it's not utf-8 support which is missing.
> Is there a way to enable these options (without the usual ./configure make)?
Rebuil
I have a CentOS 4.6 server running dhcpd. One of my client devices (a
Panasonic KX-HCM280A camera) is trying to get a lease from that
server. I can see the device accept a lease (it is a reservation),
however it always releases the reservation after about 25 seconds:
Jul 10 10:30:49 stargate dhcp
Amitava Shee wrote on Wed, 9 Jul 2008 13:27:35 -0400:
> PCRE in CentOS does not have "unicode properties" enabled.
But that's different from what you claimed earlier!
Kai
--
Kai Schätzl, Berlin, Germany
Get your web at Conactive Internet Services: http://www.conactive.com
__
Filipe Brandenburger wrote on Wed, 9 Jul 2008 23:08:44 -0400:
> The exact same question came up two weeks ago.
And the answers were confusing at least me ;-)
Kai
--
Kai Schätzl, Berlin, Germany
Get your web at Conactive Internet Services: http://www.conactive.com
___
Hi list.
I am testing CentOS 5.2 now. I experience much slower IO under HVM
Guests with the newer kernels, so I started some measurements.
DOM-0 is a fully upgraded CentOS 5.2. DOM-U is CentOS 5.0 not upgraded
at all for testing purposes. DOM-U sits on an LVM Volume. No other
services are running
Tolun ARDAHANLI wrote:
> It can be created every second... Cause we do not know when the users want
> to create these own keys...
Then they have to wait - or look why your system doesn't have a big
enough entropy pool.
What does cat /proc/sys/kernel/random/entropy_avail say?
You need a enough "r
John R Pierce wrote:
Rudi Ahlers wrote:
Hi all
I've been thinking about using CentOS on a Dell R200 server and turn
it into a firewall / network monitor / traffic shaper in our
datacentre, instead of using a dedicated firewall device.
One of the devices that I have been looking at, with my
2008/7/9 Scott Silva <[EMAIL PROTECTED]>:
> on 7-9-2008 1:08 PM John R Pierce spake the following:
>>
>> Sean Carolan wrote:
>>>
>>> Will there be a BIND patch available for this vulnerability, for CentOS
>>> 3.9?
>>>
>>> http://www.kb.cert.org/vuls/id/800113
>>>
>>
>> for that matter, how do I fig
Send CentOS-announce mailing list submissions to
[EMAIL PROTECTED]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.centos.org/mailman/listinfo/centos-announce
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reac
It can be created every second... Cause we do not know when the users want
to create these own keys...
--
Tolun ARDAHANLI
Bilgisayar Muhendisi
E-posta:[EMAIL PROTECTED]<[EMAIL PROTECTED]>
Icq:326600
Tolun ARDAHANLI
Tolun ARDAHANLI wrote:
> I want that every time the random bytes are prepared and waiting for use for
> gpg.
How often do you create a new gpg key?
And please trim your mails.
Ralph
pgpicJwrkKOb4.pgp
Description: PGP signature
___
CentOS mailing list
1 - 100 of 112 matches
Mail list logo
