On 03/19/2013 09:09 PM, Fred Smith wrote:
> On Tue, Mar 19, 2013 at 03:36:45PM -0700, Gordon Messmer wrote:
>> If you run the script manually, you should expect to see the Windows PC
>> shut down, then the Linux machine after 5 minutes, and the UPS should
>> shut down with the Linux host. Is that
> On Mar 19, 2013, at 9:32 AM, Woehrle Hartmut SBB CFF FFS (Extern)
> wrote:
>
> > Hello Mailing List
> >
> > I got a severe network error message at a HP DL360 Server.
> > The kernel log says:
>
> If that's a DL360 G7 server, make sure you've applied all of the latest
> firmware patches from
What's the irq number you can find for the device? You may have to find
the driver development guide to figure out what the debug message says.
Just the first line points out there is no irq for the device. You can
check it in /proc/interrupts, then find a match in /proc/irq/
Banya
From: John Doe
> I am trying to add esperanto and a modified greek locales... but I am not
> sure I
> am doing it right...
> On C5, a long time ago, I would:
> - grab eo_XX and el_GR from the net and put them in /usr/share/i18n/locales
> - localedef -c -i eo_XX -f UTF-8 /usr/share/locale/eo_X
Hi Ben,
Off-list as Antonio had the same message, but I would HIGHLY recommend
CloneZilla; it would only back up the used portion of the drive unlike
dd (which would save you a lot of time), and it hasn't failed me yet in
5 years. I recommend the "alternative-stable" release; it has more driver
Greetings Dear CentOS List Guys
i have some specific requirement but at this point i only with to know if
the following is possible.
1.) CENTOS Machine Acting as Router
2.) Machine is part of 10 VlANs Using 10 local interfaces
Is it possible that i can identify the source traffic and forward i
On 20/03/13 11:28, Prabhpal S. Mavi wrote:
> Is it possible that i can identify the source traffic and forward it to
> the specific interface.
>
> i.e.
>
> Remote packet coming from 192.168.21.0 should be forward to 192.168.20.20
> (eth1)
>
>
> Is that possible ?
It's possible, but it is far m
I'm actually doing it. The route2 feature can be useful in this case.
You can mark the packets and route2 will do the favor for you. It's just
different table will be used for the tagged packets. Here is what I use,
1 smtp
2 http
3 ssh
4 lan
$IPTABLES -N Cid6642X273
Send CentOS-announce mailing list submissions to
centos-annou...@centos.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.centos.org/mailman/listinfo/centos-announce
or, via email, send a message with subject or body 'help' to
centos-announce-requ..
How often are you getting these crashes ?
I had simular problem on my HP DL380 G7 server.
I disabled Active State PowerManagement on the PCI-E express.
Try it.
Add pcie_aspm=off as optional boot option.
Best regards,
Svavar O
Reykjavik - Iceland
On 19.3.2013, at 15:32, Woehrle Hartmut SBB
On Wed, Mar 20, 2013 at 01:59:48AM -0700, Gordon Messmer wrote:
> On 03/19/2013 09:09 PM, Fred Smith wrote:
> > On Tue, Mar 19, 2013 at 03:36:45PM -0700, Gordon Messmer wrote:
> >> If you run the script manually, you should expect to see the Windows PC
> >> shut down, then the Linux machine after 5
Hi all,
Someone played with kickstart bonding with centos 6.4 ?
CentOS 6.4, as upstream now support ifcae bonding in kickstart network section.
I've an issue with configuring a second bonding iface in kicstart on CentOS
6.4. The first bonding (bond0) works as espected but the second is not
con
On 03/20/2013 06:21 AM, Fred Smith wrote:
> Gordon, thanks for the additional info. I'll experiment with these
> things as time permits, and if I learn anything interesting I'll
> generate a reply at that time.
I hope to see it. :)
>
That's not really necessary. It's all in the archives alread
I am not sure what I did, but for some reason Ctrl-Alt-F? bindings are
broken on 64-bit xen desktop machine (but not on my laptop (32-bit, no
xen)). Both machines are (mostly) up-to-date and running CentOS 5.9.
I rarely hop to different Virtual Consoles (eg Ctrl-Alt-F1 ...
Ctrl-Alt-F7), but today
Often when I try "Save a copy" from a pdf viewer,
I get a nyet, no such file as /tmp/s.../... .
Making the indicated directory allows the save.
What is the problem? Is it a gnome thing?
What can I do to fix it?
--
Michael henne...@web.cs.ndsu.nodak.edu
"On Monday, I'm gonna have to tell my kind
On 2013-03-20, Gordon Messmer wrote:
>
> The master port is a power port on the UPS. If configured to do so, the
> UPS will shut off all power ports when the device on the master port
> shuts off.
Do you have a specific example of a UPS that is explicitly documented to
be configurable in this
We have CEntos 5.5 on DELL server. Due to more and more databases run on same
server sometime processes number read max and cause 'resource temporary
unavailable".
I plan to change /etc/security/limits.conf value:
oracle softnproc 2047 ==> 4096
Do i need reboot to make i
On 3/20/2013 11:19 AM, Keith Keller wrote:
> On 2013-03-20, Gordon Messmer wrote:
>> >
>> >The master port is a power port on the UPS. If configured to do so, the
>> >UPS will shut off all power ports when the device on the master port
>> >shuts off.
> Do you have a specific example of a UPS that
On Wed, 20 Mar 2013 13:14:19 -0500 (CDT)
Michael Hennebry wrote:
> Often when I try "Save a copy" from a pdf viewer,
> I get a nyet, no such file as /tmp/s.../... .
> Making the indicated directory allows the save.
> What is the problem? Is it a gnome thing?
> What can I do to fix it?
What pdf vi
mcclnx mcc wrote:
> We have CEntos 5.5 on DELL server. Due to more and more databases run on
> same server sometime processes number read max and cause 'resource
> temporary unavailable".
>
> I plan to change /etc/security/limits.conf value:
>
> oracle softnproc 2047 ==> 4096
On 03/20/2013 11:19 AM, Keith Keller wrote:
> Do you have a specific example of a UPS that is explicitly documented to
> be configurable in this fashion?
All of the non-rackmount APC UPSs I've seen in the last few years have a
master outlet.
http://www.apcmedia.com/salestools/EALN-7SEGRP/EALN-7S
On Wed, Mar 20, 2013 at 12:37:54PM -0700, Gordon Messmer wrote:
> On 03/20/2013 11:19 AM, Keith Keller wrote:
> > Do you have a specific example of a UPS that is explicitly documented to
> > be configurable in this fashion?
>
> All of the non-rackmount APC UPSs I've seen in the last few years have
On 03/20/2013 12:41 PM, Fred Smith wrote:
> I recall, from reading docs in either nut, or the apc package for
> linux (don't recall which) that many USB UPSes do have signalling
> between the UPS and the computer to tell the UPS to shut itself off
> when the system has gone offline. So, I've been a
I rmeember you can just exist the shell and log on again to apply the
changes. Not really a reboot.
You can check it with ulimit -a for the list items of the changes.
Banyan He
Blog: http://www.rootong.com
Email: ban...@rootong.com
On 3/21/2013 2:52 AM, mcclnx mcc wrote:
> We have
On 2013-03-20, Gordon Messmer wrote:
> On 03/20/2013 11:19 AM, Keith Keller wrote:
>> Do you have a specific example of a UPS that is explicitly documented to
>> be configurable in this fashion?
>
> All of the non-rackmount APC UPSs I've seen in the last few years have a
> master outlet.
>
> http
Warning Dialog Box that appears when trying to use CentOS 6.4 32bit to
upgrade a preupgrade failure of Fedora 13 to Fedora 15.
Need to make certain Re-initialize will not delete all my files, but
just rebuildable metadata.
"There is inconsistent LVM data on Volume Group vg_ec239dict. You can
rein
I have just bought an FTDI USB UART
New USB device found, idVendor=0403, idProduct=6015
New USB device strings: Mfr=1, Product=2, SerialNumber=3
Product: FT231X USB UART
Manufacturer: FTDI
However this appears to be slightly too new for the ftdi_sio driver in
C6.4; it's not detected.
I'm confused about this. Is this supposed to work without me mounting my
CD/DVD? If you are supposed to mount it, what path should you use to make this
work?
http://www.cyberciti.biz/faq/centos-linux-install-packages-from-dvd-using-yum/
=== Al
On Mon, Dec 10, 2012 at 9:40 AM, Daniel J Walsh wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 12/07/2012 06:49 PM, Gordon Messmer wrote:
>> On 12/06/2012 06:05 PM, David McGuffey wrote:
>>> Why isn't Firefox and Evolution confined with SELinux policy in a way
>>> that APT can't d
You have to check the content of the file here for the path.
|/etc/yum.repos.d/CentOS-Media.repo|
The file is deleted on my server. No samples from me then. Sorry :)
Banyan He
Blog: http://www.rootong.com
Email: ban...@rootong.com
On 3/21/2013 8:00 AM, Al Sparks wrote:
> I'm confus
On 03/20/2013 08:00 PM, Al Sparks wrote:
> I'm confused about this. Is this supposed to work without me mounting my
> CD/DVD? If you are supposed to mount it, what path should you use to make
> this work?
>
>
> http://www.cyberciti.biz/faq/centos-linux-install-packages-from-dvd-using-yum/
Hi dear friends for three days . I have a problem .
Shortly I have Hp elitebook with Centos 6 nearly more than one year without
any problem
When last update for kernel 2.6.32-358.2.1.el6.x86_64 was realeased. I did not
restart machine.
After 3 days I started machine and I got a error message
On 03/20/2013 04:11 PM, Keith Keller wrote:
> The referenced manual seems to imply that the default setting for the
> master outlet is disabled, so it may not be the issue the OP is having.
Yeah, but I'm not sure why else the UPS would shut off. CentOS won't do
that unless nut or apcupsd is inst
Thanks for response.
This drivers not there in Elrepo. This device is pcie storage device.
Thanks
Sateesh
On Mon, Mar 18, 2013 at 5:17 PM, Nux! wrote:
> On 18.03.2013 11:35, satish kondapalli wrote:
> > Hi All,
> >
> > I will appreciate your help on below question. Please provide your
> > in
34 matches
Mail list logo