d must have bookmarked/saved the https url so it
> didn't even need the initial redirect.
>
> --
>Les Mikesell
> lesmikes...@gmail.com
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/
e:5200 Kingston Technology Company Inc.
> Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
>
> I plan on verifying/updating the BIOS tonight. Is there any other
> information that I could provide to help diagnose this?
>
> -Ben
> __
On Wed, May 21, 2014 at 3:07 PM, Steve Clark wrote:
> On 05/21/2014 04:01 PM, Billy Crook wrote:
> > You know I have a couple machines I use that might fit that description.
> > They autologin to gnome and autostart firefox pointed at say, a cacti
> page.
> >
> > Wh
gt;
>
>
> _______
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
--
Billy Crook • Network and Security Administrator • RiskAnalytics, LLC
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
ed remotely and headless.
>
> Thanks,
> KC
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
--
Billy Crook • Network and Secu
gt; >>
>
> try something along the lines of:
>
> find / -regex '.*varnish.*' ! -regex '/usr/local/digitalplatform/.*'
>
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman
system was just doing
> nothing during this 600 ms.
>
> Is there any way to diagnose this issue? What it might be?
>
> --
> Andrii Zinchenko
> m...@zinok.org
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.cen
e on the middle of the left coast
>
> _______
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
--
Billy Crook * Network and Security Administrator * RiskAnalytics, LLC
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Thu, Feb 20, 2014 at 3:50 PM, Frank Cox wrote:
> On Thu, 20 Feb 2014 15:42:35 -0600
> Joseph Hesse wrote:
>
>> Apparently my hardware is not sufficient. When I run "iwlist scan" I get:
>>
>> lo p5p1; Interface doesn't support scanning
>
> I'm pretty sure you have to run it as root user.
You a
On Sun, Feb 23, 2014 at 8:33 AM, Nux! wrote:
> On 22.02.2014 22:27, James A. Peltier wrote:
>>
>> partprobe can rescan partitions, but it can't resize them. You may
>> be able to use gparted or the parted text mode to resize partitions
>> online.
>
> Sadly you can't really do this without reboot.
On Sat, Feb 22, 2014 at 12:24 AM, James A. Peltier wrote:
> The choice is yours. I use whole disk PVs myself.
Indeed I did originally use whole-disk PVs. But Anaconda doesn't
support them so during a recent rebuild we went to partitions. I'm
prepared to blame anaconda for that to an extent.
B
On Fri, Feb 21, 2014 at 6:50 PM, Phoenix, Merka wrote:
>>> add disks to an LSI raid array periodically to increase the amount of
>>> available space for business needs
>>> sdc1 is a PV in a VG that holds production data and must not become
>>> unavailable at any time
>>> How do we grow sdc1, onl
rimary
Information: Don't forget to update /etc/fstab, if necessary.
[root@host lib]# cat /sys/bus/scsi/devices/0\:2\:2\:0/block\:sdc/size
818944
[root@host lib]# cat /sys/bus/scsi/devices/0\:2\:2\:0/block\:sdc/sdc1/size
7019519933
# I bet the above 7billion will be around 8billion at
better yet a tablet. Very nice and allows
> you to look at all kinds of things, I also know of another one called Wifi
> Radar for linux but not nears as good.
> ___
> CentOS mailing list
> CentOS@centos.org
> http://list
well I bet the heatpipes would work well as an attachment point when
using the system as anchorage for aquatic vehicles.
On Tue, Feb 11, 2014 at 2:11 AM, John R Pierce wrote:
> On 2/10/2014 11:57 PM, Billy Crook wrote:
>> Ain't broke. don't fix it. If it does ever short
are *fundamental technical
> reasons* why it is necessary to sacrifice a young
> goat to your SCSI chain now and then." -- John Woods
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailma
___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
--
Billy Crook * Network and Security Administrator * RiskAnalytics, LLC
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
drive and put it in another system long enough to do the
> install. As long as the chip architecture is the same (32bit vs. 64 bit),
> it should work fine. It should work even if one system is Intel and the
> other AMD.
>
> Cheers,
> Dave
>
> _
;/selinux/enforce . But
> this is only good until reboot. But shouldn't I be now able to make changes
> in ~*
>
> Thanks,
>
> -wes
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailm
epted the password.
>> Note that ${i} was not interpolated into the file name.
>>
>> > tcgetattr: Inappropriate ioctl for device
>> > -rw-r--r-- 1 root root 3372 Oct 7 22:07
>> > /home/tdunphy/logback.xml--20131007.bak
>>
>> the ls did work
>>
>> > tcgetattr: Inappropri
ves. Wow... I was also told by the online retailer
> this is known as a grey import and is not that uncommon..
>
> So it may be a good policy to check the SMART attributes of drives before
> deployment!
>
> Cheers, Steve
> _______
&g
> Thanks in advance for all the help.
>
> Best regards,
>
> Eugenio Pacheco
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
--
Billy Crook • Network and Security Administrator •
tionality from the kernel.
Because I'm only interested in adding this serial console post-boot, I
don't think I need to configure console=. I'd like to know why this
is wrong if it is.
--
Billy Crook • Network and Security Administrator • RiskAnalytics, LLC
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
u don't trust root, that is the bigger problem, solve you must first.
There are also pam modules you could run on the cifs server that do
non-traditional authentication, for instance using single-use tokens
instead of (reusable) passwords. (Or you could change the password
after each mount).
02. I can echo m > /proc/sysctl-trigger,
and dmesg shows that the sysrq was received when initiated via the
procfs interface. But not over serial, and that's what I need.
--
Billy Crook • Network and Security Administrator • RiskAnalytics, LLC
25 matches
Mail list logo
