On 14.4.2019 13.42, H wrote:
I would love to find an old-fashionedoutliner, like the ones that
used to exist prior to the modern GUIs. It would make writing
structured documents, or organizing thoughts in general, so much more
convenient, productive and faster. Ideally it should allow saving
file
On 4.4.2016 22.01, Eero Volotinen wrote:
And openvpn. Avoid ipsec as it's too complex and pptp is unsecure.
This made me google around a little, and I found some good info here.
They, too, kind of recommend openvpn.
http://www.howtogeek.com/211329/which-is-the-best-vpn-protocol-pptp-vs.-open
My partner has been using Openvpn extensively. It looks very reasonable
and has been quite trustworthy.
It is configured via commandline. The server seems to work on Windows,
too ("Vista and later"). There are good tutorials for CentOs, for example
https://www.digitalocean.com/community/tutor
I would try
yum --disablerepo=\* --enablerepo=base --enablerepo=updates install mariadb
That would exclude possible conflicts between the base & update repos
and more exotic software from other repos.
- Jussi
___
CentOS mailing list
CentOS@centos.or
On 7.5.2015 14.24, Mauricio Tavares wrote:
I admit one think it does miss is having a convenient way to look for
a file, specially if you physically rotate drives. If rdiff-backup
will tell when was the last time a file has been backed up/touched
even if drive with said file is not mounted, I wil
I wonder why nobody has yet mentioned rdiff-backup. It combines
browsable directories with multiple versions - the version data is
stored in a separate rdiff-backup-data subdirectory (one per backup task).
One downside is that rdiff-backup causes a lot of network traffic. For
that reason I cur
On 31.3.2015 14.43, donais wrote:
Server is a Lenovo RV-340 E2420 build 70AB001VUX 8go
Support for Sata-3 6gbps and Raid-5
Did someone can tell if it can handle 6tb hard drives?
See this. It depends on the operating system version and filesystem
(ext4, xfs etc.).
http://wiki.centos.org/A
This often helps to avoid broken dependencies:
yum --disablerepo=\* --enablerepo=base --enablerepo=updates update
After that, a regular yum update.
- Jussi
On 22.12.2014 17.39, Tim Dunphy wrote:
Removing that libyaml package allowed me to upgrade!
Thanks for the tip!
___
On 11.9.2014 15.09, Eliezer Croitoru wrote:
I think amavisd-new mailing list is the better place for that.
Ok, I will ask there. Ideas are still welcome via this list, too.
- Jussi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mai
I recently noticed that my email server now delivers spam to final
recipients even though the spam score is more than the
$sa_kill_level_deflt.
A probable reason is that some amavisd update has introduced new
configuration variables, which I have not defined in my configuration,
and the defau
On 23.3.2014 16.29, Darr247 wrote:
> Do you find a temper-poll script in/usr/local/bin/ ?
> (I found that mentioned athttps://github.com/padelt/temper-python )
No. That seems to be a different approach in using the thermometer. The
one I tried was made with perl, temper-poll is python.
I tried
Hopefully someone here could help. I need to debug, but I don't know
much about perl.
I bought a cheap USB thermometer:
http://www.amazon.com/dp/B002VA813U?tag=grepular02-20
And found directions for use (for Linux) here:
https://grepular.com/Using_Linux_to_Monitor_Room_Temperature_Remotely_and
On 3.2.2014 19.58, m.r...@5-cent.us wrote:
> That's a*lot* of apache. Is that really correct? Do you really need that
> many threads? How heavily is the webserver used?
Is this a good measure? At least it's exact. :-)
# du -sh /var/log/httpd
261M/var/log/httpd
Those logs are rotated with def
My web & name server runs out of memory from time to time, to the point
where it's completely unresponsive to anything. At that point reset is
the only alternative. (Or, as this is a virtual guest, I just say "virsh
destroy").
But why this happens - I would like to know.
The host in question i
On 23.12.2013 13.17, Jitse Klomp wrote:
> You should turn SELinux back on and run 'restorecon /etc/amavisd.conf' to
> (re)set the correct SELinux context.
Thanks, maybe I will try that.
I have never learned to use SELinux, and most tutorials on the net - for
example on how to install a mail serv
This was connected with SELinux. I disabled SELinux and rebooted
(naughty me), and things are back to normal.
- Jussi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
This is CentOS 6. Why can it be that when I try to run
/etc/init.d/amavisd start
... I get this error:
Starting Mail Virus Scanner (amavisd): Config file "/etc/amavisd.conf"
is inaccessible: Permission denied, at /usr/sbin/amavisd line 2085.
[FAILED]
But when I use sh:
sh /etc/ini
Check that you have something like this in the Apache conf for that
directory:
AllowOverride All
Override there means that .htpasswd file can override the main Apache conf.
It does not really need to be "AllowOverride All", only some options are
needed. But if you have "AllowOverride Non
I am using CentOS 5, and kvm virtualization.
My VM stack (about 10 v-machines) now often gets painfully slow,
probably because of IO limitations. How could I find out where the load
comes from?
virt-top on the host only shows the processor load. For this situation,
it is not very useful.
It w
I am using CentOS 5, and kvm virtualization.
My VM stack (about 10 v-machines) now often gets painfully slow,
probably because of IO limitations. How could I find out where the load
comes from?
virt-top on the host only shows the processor load. For this situation,
it is not very useful.
It w
On 17.8.2012 15.04, John Doe wrote:
> Maybe it is this:
> http://arstechnica.com/business/2012/03/how-anonymous-plans-to-use-dns-as-a-weapon/
Interesting idea. In that case the ip's in my logs would point to the
targets of the attact. I checked a few of them, and they look more like
hijacked vic
On 17.8.2012 8.18, John R Pierce wrote:
> meh, if its coming from lots of random hosts, then fail2ban style
> techniques won't work. I assume this is an authoritative name server?
> does it have recursive queries disabled so it can only return results
> for the domain(s) its authoritative for ?
Y
Looks like one of my name servers (CentOS 5) gets a lot of malicious
queries. The cpu load is constantly about 3 %. I put on stricter limits
on who is allowed recursive queries, but this does not affect the CPU
load. I also updated bind.
I temporarily turned on querylog (command: rndc querylog)
On 16.5.2012 2.42, Jussi Hirvi wrote:
> Now I just have to fix the sendmail ("rx" instance) config so that it
> really sends the email to localhost (where amavis is listening), instead
> of trying to send directly to the final destination.
Ok, I found it, and it is *so* obviou
On 16.5.2012 1.03, Alexander Dalloz wrote:
>> define(`ESMTP_MAILER_ARGS',`TCP $h 10024')dnl
> Right, here you modify the target port of that Sendmail instance. And I
> bet $1.000 that if you tcpdump on the main mail server you will see the
> sending attempt to come in there at port 10024 and thus
On 16.5.2012 0.37, Frank Cox wrote:
> What's the point of that? (Genuine question.)
>
> One server here, one across town, or even two separate boxes in a single room
> -- sure. But in the same box? If the the box is on fire, now you're out both
> your main and your backup server.
>
> I must be
On 15.5.2012 23.54, Alexander Dalloz wrote:
> So there must be "sm-mta-rx" be defined somewhere.
Just in case, here is my conf for the rx instance. To repeat, this
sendmail instance sends everything to amavisd at port 10024.
- Jussi
divert(-1)dnl
include(`/usr/share/sendmail-cf/m4/cf.m4')dnl
VER
On 16.5.2012 0.24, m.r...@5-cent.us wrote:
> Hmmm... dumb question: is anything out of disk space?
There are no dumb questions here. :-) The culprit has to be something
simple like that. However, df shows that there is still room.
- Jussi
___
CentOS ma
On 16.5.2012 0.18, John Hinton wrote:
> A couple of things to check. I don't know if these servers are in the
> same location or not but it is possible if not, that your provider
> blocks port 25. Here are two configs to check.
Thanks for input. I can make the contact from the backup-mailserver to
On 15.5.2012 23.54, Alexander Dalloz wrote:
> What is the content of the submit.mc? Your previous log snipplet showed
>
>> > May 15 22:21:41 mx2 sm-mta-rx[8674]: q4FIhPij007483: makeconnection
> So there must be "sm-mta-rx" be defined somewhere.
Yes. In a dual sendmail setup there are two instan
On 15.5.2012 23.33, m.r...@5-cent.us wrote:
> Is there any chance that your sendmail is sending an invalid id?
Uh, what do you mean by id? Domain name? I assume that comes from
/etc/sysconfig/network. which correctly says
> HOSTNAME=mx2.greenspot.fi
- Jussi
__
On 15.5.2012 23.22, Alexander Dalloz wrote:
> It is technically impossible that the telnet to target port 25 succeeds
> from the same system on which the Sendmail gets a connection refused,
> unless Sendmail is configured to use a non-standard target port.
That is why I am baffled. :-/
I could us
Some more info. Below is a more complete telnet session from backup mail
server (mx2.greenspot.fi) to primary mail server (mail.greenspot.fi).
It only proves that sending mail works fine from command-line. But my
sendmail setup cannot do the same.
I wrote that MAILER-DAEMON can get mail through
Our backup mail server (which I have just re-configured) tries to
contact the primary mail server, and fails. My log shows repeatedly
"connection refused":
May 15 22:21:41 mx2 sm-mta-rx[8674]: q4FIhPij007483: makeconnection
(mail.greenspot.fi. [83.143.217.182]) failed: Connection refused by
ma
On 14.5.2012 11.13, Alexander Dalloz wrote:
> You are best served if you use a milter. You may find a better suiting
> milter onhttps://www.milter.org/, but I think there is no better
> flexible choice than MIMEDefanghttp://www.mimedefang.org/ (available
> through EPEL). If you speak Perl, you are
I tried to google, but find no directions for configuring this. I would
like to
1) limit greylisting only for messages that come from other countries
2) give higher spam level to these messages (preferably only for certain
receiving email addresses)
I already have installed geoip.x86_64 (1.4.6-
For MySQL backups, I think nobody mentioned doing nightly backups with
mysqldump and then backing them up with rsync or other tools. That is
what I do. No need to stop any services even for a second.
I have a two-tier backup solution, where I first backup things with
rsync to "backup 1" and the
On 22.3.2012 8.35, Woodchuck wrote:
> I believe the sequence of commands would be Gf5r3ZZ
Just a sidenote: what vi/vim command is ZZ? I notice that it saves and
quits, but why? I usually to :wq for that.
- Jussi
___
CentOS mailing list
CentOS@centos.o
On 2.3.2012 15.59, Bernd Bartmann wrote:
> The only problem is that the system hangs after
> entering "reboot". I can see that several services get stopped, but
> after some seconds the screen is just black and nothing happens
> anymore.
Does it hang after the shutdown process is totally complete,
On 24.2.2012 12.22, Markus Falb wrote:
> It was a check for proxy.
> you can try something like this:
>
> $ telnetwww.my_real_domain.com 80
> Trying ...
> Connected towww.my_real_domain.com.
> Escape character is '^]'.
> GEThttp://financeande.com/feed/feed.php HTTP/1.1
> host:www.my_real_domain.c
On 24.2.2012 10.27, John R Pierce wrote:
> On 02/24/12 12:10 AM, Jussi Hirvi wrote:
>> ...when the DNS shows that the domain financeande.com is hosted
>> elsewhere? What kind of query can they have used?
>
> a forged one with a bogus vhost.
I get almost similar entry, if I hi
How is it possible that I get this kind of queries on my webserver
(extract from httpd access log):
58.218.199.250 - - [22/Feb/2012:15:23:06 +0200] "GET
http://financeande.com/feed/feed.php HTTP/1.1" 404 291 "-" "Mozilla/4.0
(compatible; MSIE 6.0; Windows NT 5.1)"
...when the DNS shows that th
On 12.2.2012 11.51, Eero Volotinen wrote:
> Check logs for sshd deamon first. It usually gives explanation about issue.
Damn, that was simple. /var/log/secure tells it in plain language:
> Authentication refused: bad ownership or modes for directory /var/www/railsdev
(that is the home dir for the
I have a problem getting key authentication to work with one remote user
(git), even though it works fine for the remote user "root". The remote
file .ssh/authorized_keys is identical for both users - I cp'ed it from
the root account to the git home dir.
On local machine (OS X, by the way) I ha
$ ssh root@remotehost
I get in without a password. But when I do
$ ssh git@remotehost
I will be asked for a password.
What should I check?
- Jussi
--
Jussi Hirvi * Green Spot
Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland
Tel. +358 9 493 981 * Mobile +358 40 771 2098 (onl
On 31.1.2012 16.25, n...@li.nux.ro wrote:
> webmin
I was thinking about that, as I use webmin myself. I think, however,
that webmin is overkill in this case. At the moment I am testing
DirectoryPass
http://www.DirectoryPass.com/
...and it looks like nearly perfect for me, except it cannot actu
My webhotel client wants to be able to manage password protection of
their website with GUI. They need to create and destroy directories, set
.htaccess authentication, and create usernames and passwords.
There seem to be a number of tools that do this, more or less:
http://www.debianhelp.co.uk/
On 9.11.2011 14.04, Jussi Hirvi wrote:
> Looks like there is no similar "dual" setup for postfix. This postfix
> tutorial does not look bad:
>
> http://www.wowtutorial.org/tutorial/169.html
Uh, now I read some more of this thread and saw some (other) bad
tutorials. This one
On 9.11.2011 13.23, Adam Tauno Williams wrote:
> For CLAMAV you need to have clamd running and a milter. I'm not certain
> what milter's are current - when I set one up they were all had equally
> stale documentation. Does CentOS currently ship a working clamav
> milter?
Hope this is relevant. I
Uh, again I posted on the wrong list - sorry!
- Jussi
Original Message
Subject: L9 - what is true?
Date: Wed, 19 Oct 2011 15:01:59 +0300
From: Jussi Hirvi
To: CentOS mailing list
This code:
boolean(null); ', ';
boolean(string); ', ';
boolean(integer)
This code:
boolean(null); ', ';
boolean(string); ', ';
boolean(integer);', ';
boolean(array); ', ';
boolean(map);', ';
gives:
false, false, false, true, true
This is different from L8. Is this intentional? If so, why?
This has consequences which I think are counterintuitive:
if(
This code:
var('i') = string;
boolean($i); '';
var('i') = array;
boolean($i); '';
gives:
> false
> true
So an empty array gives "true" but an empty string "false".
This is different from L8. Is this intentional? If so, why?
This has consequences which I think are counterintuitive:
var('i') =
Sorry, wrong list! This is Lasso code.
- Jussi
On 17.10.2011 15.04, Jussi Hirvi wrote:
> This code:
>
> var('i') = string;
> boolean($i); '';
> var('i') = array;
> boolean($i); '';
___
Cen
This code:
var('i') = string;
boolean($i); '';
var('i') = array;
boolean($i); '';
gives:
> false
> true
So an empty array gives "true" but an empty string "false".
This is different from L8. Is this intentional? If so, why?
- Jussi
___
CentOS mail
On 23.7.2011 21.58, Ljubomir Ljubojevic wrote:
> I just enabled all repos on my system, to enable me to find
>> a particular package. This is the first time I have noticed
>> all the Centos repos< 5.6 being listed.
>>
>> Is this a new feature, to include all repos pre 5.6 now?
>>
I have these
On 20.7.2011 4.32, Les Mikesell wrote:
> One feature you are likely to miss, though, is a good search for the archives.
> If it is open to the public I suppose you can let google index it for you.
+1
If someone knows a fix, please share.
Mailman 3 will most probably have searchable archives, but
On 7.7.2011 19.46, Giovanni Tirloni wrote:
> There are more details about diskdevstat and netdevstat here:
> http://goo.gl/pA8Yt
>
> Since they depend on SystemTap, check this:
> http://sourceware.org/systemtap/wiki/SystemTapOnCentOS
>
> I couldn't find the tuned-utils package for CentOS 5.x but, i
> Red Hat Enterprise Linux 6 also introduces diskdevstat for monitoring
> disk operations and netdevstat for monitoring network operations.
How could I monitor disk operations under CentOS 5?
The quote is from RHEL 6 release notes
http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/htm
On 1.7.2011 18.49, m.r...@5-cent.us wrote:
> ah, the smell of fresh plastic outgassing, factory
> air from China :(((
Probably more the smell of fire prevention chemicals outgassing. Be
careful! As for me, I am sensitized to that smell.
- Jussi
___
Cen
On 1.7.2011 18.49, m.r...@5-cent.us wrote:
> ah, the smell of fresh plastic outgassing, factory
> air from China :(((
Probably more the smell of fire prevention chemicals outgassing. Be
careful! I am sensitized to that smell.
- Jussi
___
CentOS mailing
>> Is there any mention of a floppy in output of "mount"?
> Hello Jussi.
>
On 29.6.2011 20.51, Keith Roberts wrote:
> None at all using 'mount' or 'df -h'
Here is somebody having the same problem, though on Suse:
http://www.linuxquestions.org/questions/linux-software-2/linux-kernel-end_request-i-
On 29.6.2011 20.37, Keith Roberts wrote:
> Checking my daily logwatch file, I see the following kernel
> error:
>
>- Kernel Begin
>
>WARNING: Kernel Errors Present
> end_request: I/O error, dev fd0, sector ...: 1 Time(s)
>
>--
On 29.6.2011 12.56, John Doe wrote:
> I noticed a difference between it and a simple 'yum':
>
># yum udpate
>Loaded plugins: fastestmirror, priorities
>usage: yum [options] COMMAND
>
>
># yum
>Loaded plugins: fastestmirror, priorities
>You need to give some command
>usag
On 11.6.2011 19.08, Alain Péan wrote:
> I hope not to begin a flame war, but I would recommend Python. It can do
> the same things as Perl (regexp ansd so on), but is easier and faster to
> learn, and the code is also much more readeable...
In practice, any language you know well enough... This is
st cycle is slow (modify
script, quit the realfile, open realfile again with vim -s script).
Verbal error messages would be useful. There is supposed to be
"integrated debugger". I would like to know more.
- Jussi
--
Jussi Hirvi * Green Spot
Suvilahdenkatu 1 B 78 * 00500 Helsinki
/g
- Jussi
--
Jussi Hirvi * Green Spot
Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland
Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms)
jussi.hi...@greenspot.fi * http://www.greenspot.fi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.
On 9.6.2011 18.01, m.r...@5-cent.us wrote:
> Why do vim scripting? That's what sed, or awk, or perl, are for. The
> latter two, of course, are much easier to comprehend the logic, too.
Maybe just because I know vim better than sed, awk or perl, which I
haven't used at all. :-)
The practical purp
I am working on my first vim script. The script is supposed to do some
find/replace on a file, then save the file with a new name and quit vim.
I will save the script in a file and then call it from a bash script
like this:
vim path-to-the-file -s path-to-my-script
Maybe I have not fou
On 7.6.2011 1.19, Timothy Murphy wrote:
> But I'm not sure what "image #2" is? Or where it should be put?
>
images/stage2.img ??
-Jussi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 1.6.2011 19.52, Robert Heller wrote:
> I have a CentOS 5.6 system with a AMD Sempron(tm) Processor LE-1300
> (which does not provide hardware virtualization support, so I can't use
> the --cdrom option) and I am *trying* to install FC15 as a guest O/S
> using a local FC15 DVD-ROM image. Everyth
It has been a long thread, but one point that has been mentioned only in
passing (VMWares "top 5 reasons") is cutting the electricity
consumption. Maybe this is obvious.
I recently consolidated 8 hardware servers to a single 1U Dell, which
runs KVM virtualization. The power bill was cut to a fr
On 21.5.2011 20.43, R P Herrold wrote:
> early in the thread, it was clear from a reply's content that
> a locally installed 'ftpd' and not the CentOS vsftpd was
> being used
I think you are inadvertently confusing the issue. ftpd is mentioned in
this file (see below), but still vsftpd is used:
On 21.5.2011 19.02, Lamar Owen wrote:
> Now, one of my C5.6 boxen is set up with /etc/vsftpd/vsftpd.conf:
> # The name of log file when xferlog_enable=YES and xferlog_std_format=YES
> # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
> #xferlog_file=/var/log/xferlog
> #
> which
On 18.5.2011 16.54, Bowie Bailey wrote:
> You can also do this:
>
> $ vim `ls -1 *.txt`
That one can be accomplished in a simpler way:
vim *.txt
- Jussi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 17.5.2011 19.36, Bowie Bailey wrote:
> Try this:
>
> vim `cat list`
Thanks, this really works! I tried it with all my combinations:
OS X workstation by itself
OS X workstation -> ssh -> CentOS 4
OS X workstation -> ssh -> CentOS 5
BTW, with the xargs command, all of these combinations give so
There are some googlable ways to feed a list of filenames to vim, but I
stumble on weird results.
With my filelist, I try to do
cat list | xargs vim
...to edit the files listed in the file "list". Here's what happens:
[root@lasso2 tempdir]# ls -l
total 8
-rw-r--r-- 1 root root 0 May
On 3.5.2011 22.05, Andy Holt wrote:
> ls -l /dev/disk/by-id
>
> which on my system gives me:
>
> lrwxrwxrwx 1 root root 9 Mar 6 14:34
> scsi-SATA_SAMSUNG_HD154UIS1XWJ1BZ900317 -> ../../sdc
> lrwxrwxrwx 1 root root 9 Mar 6 14:34
> scsi-SATA_SAMSUNG_HD154UIS1XWJ1BZ900318 -> ../../sdb
> lrwxrw
> On Thu, 28 Apr 2011, Jussi Hirvi wrote:
>
>> > BTW, can guests be installed on raw (unformatted or formatted)
>> > partitions (not images)? Can virt-install do that? I tried it and had no
>> > luck.
>> >
>> > - Jussi
> You can instal
On 30.4.2011 12.34, Eero Volotinen wrote:
> take look at serial number using smartctl
>
> http://www.techrepublic.com/blog/opensource/using-smartctl-to-get-smart-status-information-on-your-hard-drives/1389
>
Thanks, I did. I am sure they will help me when it is time to actually
replace the drive.
I am sure this is really simple.
I have a setup of 2 disks (sda, sdb) which are outwardly identical, and
are mirrors of each other. Together they form 3 raid1 devices. Both
disks can boot.
Now sda has bad sectors, and I should replace it. But which one of the
physical disks is sda??
The machi
ckage would have
> obsoleted php-common rather than conflicting with it.
>
> Is there a clean way to replace php with php53? Or should I just wait
> and hope that Centos 6 is released before WP 3.2 :)
>
> Thanks,
>
> Dave...
>
--
Jussi Hirvi * Gree
On 28.4.2011 20.29, Tru Huynh wrote:
> does that mean that you volonteer to add some pages to wiki.centos.org
> (-> centos-docs mailing list for more) ? ;P
>
Maybe I could, How could that be done? Though I should have started to
think about that earlier, now the big install hassle starts to be ov
On 28.4.2011 18.58, Emmanuel Noobadmin wrote:
> like anaconda not seeing the "dvd"
> (mounted ISO specified using --location) that it just booted from.
That's ok, once you know that... But I agree, it is frustrating, because
of lack of documentation. How much time wasted!
I found an interesting
> On 4/28/11, Jussi Hirvi wrote:
>>> Try virt-install without creating the image first.
On 28.4.2011 9.17, Emmanuel Noobadmin wrote:
> I'll give that a spin next, although the disks file I created are RAW
> as well. The problem wth using virt-install to create files is
On 28.4.2011 8.11, Emmanuel Noobadmin wrote:
> So this is where my installation halts. I will get the message unable
> to retrievehttp://12.34.56.78//Centos56/images/stage2.img
>
You could check your httpd log to see if there is anything, like 404
errors. And if problems persist, you could stop ip
>> > Here is one of my install commands that worked:
>> > virt-install --name mail \
>> > --os-variant rhel5.4 --ram 1024 \
>> > --vcpus 2 --accelerate \
>> > --nographics -v \
>> > --location /mnt/centos56/ --network bridge:br0 \
>> > --disk path=/kvmail/mail.img,size=290 \
>> > --extra-
year is going to be victory for VMWare again.
>
> CC to kvm mailing list but I expect, like my previous request for help
> to the list, it will be rejected by mailman or a moderator.
>
>
> Just damn frustrated, even if it's probably just me being too stupid
> to know how t
Thanks for a triple answer. :-) Now I remember - like I said, I solved
this problem once already. Hm, I should document better what I do...
- Jussi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
My brain must be on knots somehow.
I try to install rsync 3.x, which I know is in rpmforge repo for my
architecture:
https://www.centos.org/modules/newbb/viewtopic.php?topic_id=22214
http://packages.sw.be/rsync/
But yum does not find it, however I try.
I have installed yum-priorities. Rpmforg
complain about HFS+ superblock? The fs should be ext3.
- Jussi
--
Jussi Hirvi * Green Spot
Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland
Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms)
jussi.hi...@greenspot.fi * http://www.greenspot.fi
___
On 26.4.2011 0.47, Emmanuel Noobadmin wrote:
> I'm having problems trying to install CentOS as a KVM guest despite
> following the wikis and howtos.
I succeeded with this howto:
http://sysadminman.net/blog/2011/kvm-virtualization-text-centos-guest-install-2098
Except I skipped the lvcreate part,
> On Sun, 24 Apr 2011, Jussi Hirvi wrote:
>> > Does anyone have the .iso image of virt-p2v? It is not available anymore
>> > through that link. The source is available, but building it requires a
>> > *lot* of packages, some of which seem to be hard to find.
Good
> Jussi Hirvi writes:
>
>> > A while ago I got great instructions from Pasi for migrating standalone
>> > systems to*xen*. However, now I have decided to use KVM instead, which
>> > raises a new question:
>> >
>> > How to migrate a standalone
On 23.4.2011 13.31, Kai Schaetzl wrote:
> FYI: there is a list centos-virt.
Thanks for the tip! I am going to cross-post (sorry) my current
questions, but I still welcome answers on this list.
- Jussi
___
CentOS mailing list
CentOS@centos.org
http://li
ach partitions to guests.
- Jussi
--
Jussi Hirvi * Green Spot
Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland
Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms)
jussi.hi...@greenspot.fi * http://www.greenspot.fi
___
CentOS mailing lis
On 6.4.2011 15.44, Michael Zoet wrote:
> I am trying to install CentOS 5.5 as VM on a KVM server running Ubuntu
> 10.04. The Problem: the installer does not find the iso image. (Direct
> copy from website downlod.) I can start CentOS from the iso and can even
> do some disk checks. But when I go fu
uest (and if the guest
> supports it).
Well, in my system there is no scsi disk on the guest (the guest only
sees the img on which it runs), and I don't know how I could get one
there. :-/
- Jussi
--
Jussi Hirvi * Green Spot
Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland
Tel. +358 9 4
oduces this error. I find no google results
with this error text. Can someone tell, what causes the error?
> error: Failed to attach disk error: operation failed: adding scsi
> disk controller failed: type scsi not a hotpluggable PCI device.
> failed to add if=scsi
- Jussi
--
Jussi Hirv
On 21.4.2011 23.17, Jussi Hirvi wrote:
> I wonder if the disk image will be of type
> qcow2. I guess I will soon find out.
Nope. Command "qemu-img info.." tells me that the image type is "raw".
But I don't think I need any of the qcow2 specialties.
- Juss
works! I wonder if the disk image will be of type
qcow2. I guess I will soon find out.
- Jussi
--
Jussi Hirvi * Green Spot
Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland
Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms)
jussi.hi...@greenspot.f
1 - 100 of 249 matches
Mail list logo
