Since you have taken the disk apart it will now be useless as within the
enclosure there could have been a vacuum or an inert gas.
You will never be able to recover any data on the disk unless you go and pay
for a professional data recovery organisation to read the platters.
The price for a r
Hi Michael,
With SSD's, no matter what storage technology is used, you pay your money
and you take your choice.
The more expensive SSD's have higher I/O rates, higher data bandwidth and
better durability.
I would go for NVMe as this gives a higher data rate with PCIe 3.0 and PCIe
4.0 (twic
The way I start the firewall is as follows:
systemctl enable firewalld
systemctl start firewalld
systemctl status firewalld
Regards,
Mark Woolfson
MW Consultancy Ltd
Leeds
LS18 4LY
United Kingdom
Tel: +44 113 259 1204
Mob: +44 786 065 2778
-Original Message-
From: Jeffrey Walton
Sen
output of "hwinfo --gfxcard"
Some useful info is published here (sorry not CentOS related)
https://wiki.archlinux.org/index.php/Hardware_video_acceleration#Intel
Cheers
Fleur
Il giorno sab 18 gen 2020 alle ore 01:07 John Pierce
ha scritto:
On Fri, Jan 17, 2020 at 8:53 AM Mark (N
Hello,
I have an Intel NUC7PJYH running CentOS 6.8. This is a NUC with standard USB,
1GbE and 2*HDMI.
Installation was no problem providing acpi=off.
The problem is that by default the two displays are mirrored and I can’t seem
to separate them.
I can only see one HDMI port from CentOS.
I ne
Hello,
Is the Intel Celeron J5005 processor supported on CentOS 6.8.
If not, is there a CentOS version which supports this processor.
Regards,
Mark Woolfson
MW Consultancy Ltd
Leeds
LS18 4LY
United Kingdom
Tel: +44 113 259 1204
Mob: +44 786 065 2778
__
Hello,
Please can anyone help with the problem below when trying to install CentOS 7.6
on an IBM x3500 M3 from DVD or USB.
CentOS 7.5 installs perfectly with no errors.
CentOS 7.6 tries to boot, an error is output briefly and the workstation powers
down.
CentOS 7.7 displays the error briefly
Hello,
There was a support issue with the Intel Skylake and CentOS 6.* where the
graphics hardware was not supported.
Intel have now come up with a software solution to support the AST2500 graphics
hardware on the Skylake.
Regards,
Mark Woolfson
MW Consultancy Ltd
Leeds
LS18 4LY
United Kingdom
Try looking at MSI or Acer. MSI have the best range.
Regards,
Mark Woolfson
MW Consultancy Ltd
Leeds
LS18 4LY
United Kingdom
Tel: +44 113 259 1204
Mob: +44 786 065 2778
-Original Message-
From: Jeff Layton
Sent: Thursday, November 9, 2017 7:07 PM
To: CentOS
Subject: [CentOS] Best lapt
CentOS 6.9 has support for the Haswell processor which is a subset of the
Skylake.
All Skylake server ancillary components work perfectly with CentOS 6.9.
The AST2500 used with the Skylake is very good and will process UHD. However
this is not backwards compatible with legacy variants.
To ma
Hello,
I have a pre-production Intel Skylake server using dual 8176 processors (28
core @2.1Ghz)
I have loaded from the DVD distribution CentOS 7.3 and RHEL 7.4 with no
problems.
When I try and load CentOS 6.9 the boot process hangs just as the Anaconda
graphics is started for CentOS configur
Subject: Re: [CentOS] CentOS 6.9 Skylake soft error
Hello Mark,
which kernel you use? Sometimes it is only an „information“.
Sincerely
Andy
Am 31.05.2017 um 10:00 schrieb Mark (Netbook) :
Hello,
I have an Intel NUC6i5 (Skylake i5-6260u processor) running CentOS 6.9 and
there are no real
Hello,
I have an Intel NUC6i5 (Skylake i5-6260u processor) running CentOS 6.9 and
there are no real problems. However during boot an error occurs in dmesg where
a PCH unknown device 0x9d48 is logged. How can I get rid of this error output?
Thank you,
Mark
___
and Intel graphics
Google ?
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
From: "Mark (Netbook)"
To: "CentOS mailing list"
Sent: Wednesday, 12 April, 2017 17:25:12
Subject: Re: [CentOS] Re CentOS and Intel graphics
Borg technology!
Nux!
www.nux.ro
- Original Message -
From: "Mark (Netbook)"
To: "CentOS mailing list"
Sent: Wednesday, 12 April, 2017 17:13:56
Subject: [CentOS] Re CentOS and Intel graphics
Hello,
I have an Intel NUC7i3 with 620 graphics and an Intel NUC7i7 wi
Hello,
I have an Intel NUC7i3 with 620 graphics and an Intel NUC7i7 with 640 graphics.
I have loaded CentOS 6.9 and the graphics is not fully working.
I believe that I need a driver.
Does CentOS support the Intel 620 and 640 graphics and if not, can someone
please point me in the direction of the
16 matches
Mail list logo
