Fedora Server, installed and operational.
Thanks for your help!
On Mon, Sep 5, 2022 at 1:00 PM Leon Fauster via CentOS
wrote:
> Am 05.09.22 um 17:18 schrieb Mike:
> > Thanks very much for the link and your reply.
> > Yes, glibc and other core parts set with specific cpu fla
Thanks very much for the link and your reply.
Yes, glibc and other core parts set with specific cpu flags is precisely
what I feared.
I suppose it's over to debian or prep the old box for recycling.
Best regards.
On Mon, Sep 5, 2022 at 11:07 AM Fabian Arrotin wrote:
> On 05/09/2022 16:
Hello All,
RHEL9 deprecated version 1 x86_64 cpus. My old testbench HP workstation
has such a version 1 cpu. I've tested install of Rocky Linux 9 and
CentOS9Stream but no go upon reboot after install -- kernel panic.
Is there a way to recompile the kernel to handle the legacy cpu after
install -
as denied
would indicate that it is not vulnerable to that type of abuse.
While this is true, denial of those queries doesn't prevent that server
from potentially being flooded with those queries.
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, sav
On 2022-06-20 09:38, Pete Biggs wrote:
On Mon, 2022-06-20 at 09:20 -0400, Mike Burger wrote:
On 2022-06-20 05:03, Pete Biggs wrote:
> On Mon, 2022-06-20 at 09:31 +0100, david allan finch wrote:
> > Is there an rpm of GCC 12 (or at least higher than 9) available to
> > download
GCC 11, as noted above, leave him downlevel?
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1
_
up for the
Centos-Announce list at
https://lists.centos.org/mailman/listinfo/centos-announce.
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
just stops by to say 'hi' anymore." --
tential for the vulnerability existing in
1.2, it may happen.
It would be nice if there was a log4j-2 RPM available for C7, but as of
this point, I've not been been able to locate one.
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet
o far nothing has worked.
thx
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1
___
CentOS m
at's words, "this isn't a sales program, and no sales
> representative will follow up."
>
> Regards
>
> Andrew
>
It seems to be available now. Just log into or create a "Developer
Network" account and they just
I have seen significant improvement when virtual machine disks are on
their own spindle/ssd. I would add an SSD and put the VM's on it.
Mike
On 12/26/2020 3:20 PM, Nicolas Kovacs wrote:
> Hi,
>
> My workstation is currently equipped with a pair of Western Digital Red 1 TB
>
Would love to see this get off the ground:
Gregory Kurtzer says:
I am considering creating another rebuild of RHEL and may even be able
to hire some people for this effort. If you are interested in helping,
please join the HPCng slack (link on the website hpcng.org).
Greg
(original
something LibreOffice should be able to
> do.
>
> Regards,
> Simon
>
I would agree. In my experience, so called "lockups" are usually the
result of the video crashing. If you can ping then try ssh to the box
and do init 3 then init 5 to reset
It appears that it is affecting multiple distributions including Debian
and Ubuntu so it looks like the grub2 team messed up. See
https://www.zdnet.com/article/boothole-fixes-causing-boot-problems-across-multiple-linux-distros/
Mike
On 8/1/2020 6:11 PM, Marc Balmer via CentOS wrote:
>
>
Are there any repos that would have perl-Curses for CentOS 8? It was
always available in epel but not anymore.
Thanks,
Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On Sun, Apr 19, 2020 at 9:45 AM Anand Buddhdev wrote:
>
> Personally though, I find firewalld to be cumbersome, so I remove it
> completely, and installed instead "iptables-services".
>
Ya, i agonized over accepting firewalld.
I'm a smalltime manager who wears many hats and doesn't have alot of
t
Thought it might also be helpful to confirm that firewalld is not
interfering in any way.
what is the output of ~$# systemctl status firewalld
On Sun, Apr 19, 2020 at 9:30 AM Jeffrey Walton wrote:
>
> On Sun, Apr 19, 2020 at 9:26 AM Anand Buddhdev wrote:
> >
> > On 19/04/2020 14:58, Jeffrey Wa
I just read an article (part of which is here
http://www.linuxpromagazine.com/Issues/2020/230/The-sys-admin-s-daily-grind-urlwatch/(language)/eng-US
) about urlwatch.
---
Mike VanHorn
Senior Computer Systems Administrator
College of Engineering and Computer Science
Wright State University
265
your answers.
A quick google search:
https://lmgtfy.com/?qtype=search&q=%2Fetc%2Fsubuid
yielded this as the first link:
http://man7.org/linux/man-pages/man5/subuid.5.html
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No o
would look at a secondary
repository like>EPEL. It doesn't look like anyone has requested them there
yet so I>would open a ticket in bugzilla.redhat.com to see if the
maintainer>would branch and build in EPEL.Stephen, taking the oportunity
here to ask for
On 10/4/19 12:27 PM, Jim Perrin wrote:> Why? I'd like to understand more
about the use case where this is a requirement.I'd say for the sake of
simplicity...Why complicate things with NM when you only need to set an IP ?The
ifconfig files were great.Why is the choice, to use or not to use NM, no
On Thu, Jul 25, 2019 at 11:20 AM Chris Schanzle wrote:
> Hi Mike,
>
> You say (twice) all the dependencies are installed but you didn't say
> specifically what you installed. I suspect you didn't install the
> corresponding -devel packages which provide the files
On Thu, Jul 25, 2019 at 10:45 AM Nux! wrote:
>
> You could try to get this slightly old rpm, save you the build troubles
> (untested):
> http://ftp5.gwdg.de/pub/opensuse/repositories/home:/garloff:/storage/RHEL_7/x86_64/
Thanks I may go back to this repo if I can't get it done with more
current p
cate, I do not find any of these files, so how do I properly
add the packages to the path --
`blkid.pc'
`uuid.pc'
`libsodium.pc'
`libzstd.pc'
Thanks for reading and I appreciate any guidance.
Best,
Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
https://www.asrock.com/nettop/index.asp
Asrock has a series of Intel and/or AMD based mini-pc's called the DeskMini.
Competes in the Intel NUC space.
Plenty of power and up-to-date components, multiple ports for dual
monitor and at least two ssd's, etc.
I don't work for Asrock or sell their equipm
actions to add iptables rules which invoke DROP instead of
REJECT.
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1
__
id you include this line:
postgrey unix - n n - -
/var/spool/postfix/postgrey/socket
in your /etc/postix/master.cf file?
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one
y good job of
weeding out the spambot desktops and such.
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1
___
On 3/6/19 1:28 PM, Johnny Hughes wrote:
> On 3/6/19 6:26 AM, Mike McTernan (wavemobile) wrote:
> > On 3/5/19 5:48 PM, Johnny Hughes wrote:
> > Last question, if I may - Is there any specific reason why an i686 PAE
> > kernel built from the main RHEL sources isn't in
On 3/5/19 5:48 PM, Johnny Hughes wrote:
> On 3/4/19 3:39 PM, Mike McTernan (wavemobile) wrote:
> > Looking around, I found the following repo:
> > https://mirrors.dotsrc.org/centos-altarch/7/kernel/i386/
...
> That directory (kernel/ under altarch) is basically for the arm
on in the 'normal' i386 CentOS 7 builds.
If anyone could help explain this repo and the view on PAE for the AltArch i386
builds of CentOS 7, I would be really grateful as I can't find the info
anywhere else!
Kind Regards,
Mike
--
wavemobile
Warning: The information transmitted
So far I am having smooth and functional experience with Kyocera
multi-function devices.
They connect easily to the main samba active directory domain controller
and there is a decent Android app for wireless or network printing.
PPD driver works in fedora but haven't tried with centOS yet. Scannin
t with the
full RAID array and run the update.
Thanks in advance!
I've been a big fan of Mondo Rescue. http://www.mondorescue.org/
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
just stops by to s
ot compatible with the current kernel. I suggest you
file a request to have the kmod-8188eu rebuilt for EL 7.6 at
http://elrepo.org/bugs/ .
Akeme
Another alternative may be to pull down the SRPM and run it through
rpmbuild to locally create a binary package compatible with the system
as it
rpmbuild to build it, specifically, for your
system.
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1
_
with multiple
DIFFERENT users logged in but the desktops can only deal with one login
and home directory per user.
Mike, W1NR
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
y private you only
need distribute the one public key every where you need secure
identification.
Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
t; CentOS mailing list
> > CentOS@centos.org
> > https://lists.centos.org/mailman/listinfo/centos
>
> Whoops, that is the one for 8 I have been added on. Bug I reported for
> 7.6 (also
> locked):
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1646022
>
> Regards
>
> Phil
>
Those bugs all have restricted access and I cannot see them.
Mike
signature.asc
Description: OpenPGP digital signature
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
A bit embarrassing,I answered my own question almost a year ago on
another forum.
Apologies for the extra mail --
Solution: firewalld-cmd --complete-reload
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
I need to be able to temporarily cut off the source of network slowdowns.
What I used to do:
Router with 2 x NICs running slackware 14.
Execute iptraf-ng, choose IP Network Monitor and sort by Byte Count.
The sorted screen always seemed a bit confusing but I could usually
pluck a couple of IP addr
sers, so I've moved my DNS and
mail server to the cloud.
Between the two of them, they cost me about $50/month...not cheap, but
my IP isn't automatically on blacklists and I control everything,
including inbound spam protection.
--
Mike Burger
http://www.bubbanfriends.org
"It&#
can
handle it, you should be fine.
And if you're looking for major operations running on Power, look no
farther than Google...they're a huge part of the Power consortium and
run a huge farm of Power systems on Tyan boards.
--
Mike Burger
http://www.bubbanfriends.org
"It'
you can only bind one listener for a
port to an interface and not to individual IP addresses on the same
interface. If you use "virtual" interfaces to separate the IP addresses
(eth0:0, eth0:1) then I would expect it to work.
- Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
| grep
syslog
udp 0 0 0.0.0.0:51427 0.0.0.0:* 66655/rsyslogd
Adam,
You might want to try running:
lsof -i -P | grep LISTEN | grep :51427
to determine what process is actually listening to that port.
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this
Your IP address is flagged as spam in Real Time Block Lists. Are you
using a dynamic IP address? You may have a mis-configured server that is
allowing spammers to relay through your server. Another possibility is
your system is compromised with a spambot.
Mike
On 07/24/2018 07:31 AM, TE Dukes
fstab: /dev/mapper/alpha-charlie
/mnt/dataxfsdefaults0 0
[root@localhost ~]# systemctl reboot
copy/move/read/write/to/from /mnt/data --- yes to all.
On Sat, Jul 14, 2018 at 2:25 PM Mike <1100...@gmail.com> wrote:
>
> /dev/lvm_pool/lvol001 and /dev/mapper/lvm_pool-lvol001
/dev/lvm_pool/lvol001 and /dev/mapper/lvm_pool-lvol001 work with kernel 514.
they don't work with kernel 862.
the googling continues . . .
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On Sat, Jul 14, 2018 at 2:15 PM Tony Schreiner wrote:
> I don't have an answer to why kernel 514 is not booting,
> but what I was trying to say is:
>
> /dev/lvm_pool/lvol001
> and
> /dev/mapper/lvm_pool-lvol001
> are both symlinks to the same /dev/dm-X device file.
> You can use either name, but t
On Sat, Jul 14, 2018 at 1:57 PM Tony Schreiner wrote:
>
> >
> > Is that first entry /dev/mapper/lvol001 right?
> I'd expect /dev/mapper/lvm_pool-lvo001
ssm list shows -
/dev/lvm_pool/lvol001
When I place /dev/lvm_pool/lvol001 into /etc/fstab the computer will
boot using kernel 514.
Kernel 862 s
Tried --
umount -t xfs /mnt/data
vgchange -a n lvm_pool
vgexport lvm_pool
vgimport lvm_pool
Rebooted and kernel 862 still panics/hangs.
Can boot into kernel 514.
On Sat, Jul 14, 2018 at 1:35 PM Mike <1100...@gmail.com> wrote:
>
> When I change /etc/fstab from /dev/mapper/lvol0
When I change /etc/fstab from /dev/mapper/lvol001 to
/dev/lvm_pool/lvol001, kernel 3.10.0-514 will boot.
Kernel 3.10.0-862 hangs and will not boot.
On Sat, Jul 14, 2018 at 1:20 PM Mike <1100...@gmail.com> wrote:
>
> Maybe not a good assumption afterall --
>
> I can no longer
policy changes from the
old store structure to the new structure.
Dependency failed for Relabel all filesystems, if necessary.
On Sat, Jul 14, 2018 at 12:55 PM Mike <1100...@gmail.com> wrote:
>
> I did the following test:
>
> ###
>
I did the following test:
###
1.
Computer with Centos 7.5 installed on hard drive /dev/sda.
Added two hard drives to the computer: /dev/sdb and /dev/sdc.
Created a new logical volume in RAID-1 using RedHat System Storage Manager:
ssm create --fstype
I make no promises that it is there, but you could try
system-config-lvm.
If that doesn't work, the lvextend and lvreduce commands should work for
you.
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
just stop
Does this laptop have the Nvidia Quadro graphics option? If so try
booting with NOMODESET. Also, if available in the BIOS turn OFF
switchable graphics.
Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo
> On Feb 17, 2018, at 11:09 AM, hw wrote:
>
> Mike Burger wrote:
>>> On 2018-02-16 9:29 am, hw wrote:
>>> Mike Burger wrote:
>>>>> On 2018-02-16 8:16 am, hw wrote:
>>>>> William Warren wrote:
>>>>>> I would just buy a
On 2018-02-16 9:29 am, hw wrote:
Mike Burger wrote:
On 2018-02-16 8:16 am, hw wrote:
William Warren wrote:
I would just buy a cloudkey and not have to bother installing the
software
onto your machine directly. If you do not have a power over
ethernet
switch you'll need a micro USB cabl
f the maintenance to someone else's hands.
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1
How about kernel-lt and kernel-ml?
Mike
On 01/04/2018 05:41 PM, Warren Young wrote:
> On Jan 4, 2018, at 12:18 PM, Walter H. wrote:
>> will there be updates for these CVEs for CentOS 6?
> Red Hat hasn’t released them all yet. Quoting Christopher Robinson in the
> threa
It turns out kdump.service is already enabled on the server and
/etc/kdump.conf settings would report any kernel crash/error items to
/var/crash.
The /var/crash file/folder is empty.
It leads me to think the kernel is not crashing; however, I could be wrong.
I'll need to perform another test "syste
Thank you for your thoughtful responses.
Very much appreciated.
Good points to follow up with.
Kind regards,
Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On Sat, Oct 14, 2017 at 6:24 PM, Jonathan Billings wrote:
>
> When you say that the monitor is plugged in, and the server is unresponsive,
> does that mean that the monitor doesn’t even come active? That sounds like
> it might have crashed the kernel in a way that the display isn’t showing.
>
>
cat /etc/centos-release:
CentOS Linux release 7.4.1708 (Core)
The bugzilla report does sound similar --- in one of the comments, a
user reports hang-up when trying remote reboot.
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman
On Sat, Oct 14, 2017 at 2:29 PM, Vitalino Victor wrote:
>
> Try:
>
> # shutdown -r now
>
I'll have to try this late one evening.
It's a production Samba Active Directory Domain Controller in
production so it's difficult to do this without warning to users.
directly on the server.
Same problem --- does not start to login prompt.
Manually power down and power up again --- works and all is well.
Anyone have this problem before?
I've checked all the BIOS options and I can't find anything misconfigured.
Th
running updates.
---
Mike VanHorn
Senior Computer Systems Administrator
College of Engineering and Computer Science
Wright State University
265 Russ Engineering Center
937-775-5157
michael.vanh...@wright.edu
On 10/10/17, 9:55 AM, "CentOS on behalf of KM" wrote:
First off - let me say
perience I have seen drives that will work flawlessly under
Windows/NTFS but fail spectacularly under Linux. And EVERY time it
turned out to be a firmware bug.
Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
and is not likely to change any time soon. YMMV.
> ___
I missed some of the responses but have you tried kernel-ml for RHEL 7
yet? See http://elrepo.org/tiki/kernel-ml
Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
7 virtual guest.
If you REALLY need RHEL (CentOS) running on the hardware I would return
the XPS and get a Lattitude or Precision laptop. They have much better
Linux support as they tend to be more stability oriented rather than
latest and greatest hardware.
Mike
On 07/27/2017 01:25 PM, wwp
, at this point, everything that would have been running
from this LV/FS is down, have you considered unmounting the filesystem
and running a filesystem check against it?
If it's EXT2/3/4, you can run fsck against it, if it's XFS, you can run
xfs_repair against it.
--
Mike B
efore it seemed
to think that the boolean was not set), so I guess I’ll what the log and see
what happens.
Thanks!
---
Mike VanHorn
Senior Computer Systems Administrator
College of Engineering and Computer Science
Wright State University
265 Russ Engineering Center
937-775-5157
michael
ort_t:s0 tclass=tcp_socket
Was caused by:
Unknown - would be allowed by active policy
Possible mismatch between this policy and the one under which
the audit message was generated.
Possible mismatch between current in-memory boolean settings
vs.
allow_ypbind 1
---
Mike VanHorn
Senior Computer Systems Administrator
College of Engineering and Computer Science
Wright State University
265 Russ Engineering Center
937-775-5157
michael.vanh...@wright.edu
On 6/6/17, 9:29 AM, "Daniel Walsh" wrote:
If you run this avc though audit2why wh
ind --> on
#
Does anyone with more experience with SELinux than me have any idea why this is
happening?
---
Mike VanHorn
Senior Computer Systems Administrator
College of Engineering and Computer Science
Wright State University
265 Russ Engineering Center
937-775-5157
michael.vanh.
ble?, i hope so. Thanks :D
> ___
> CentOS mailing list
> CentOS@centos.org
> https://lists.centos.org/mailman/listinfo/centos
>
--
---~~.~~---
Mike
// SilverTip257 //
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
ce I’ve never see the
network outperform the system bus.
---
Mike VanHorn
Senior Computer Systems Administrator
College of Engineering and Computer Science
Wright State University
265 Russ Engineering Center
937-775-5157
michael.vanh...@wright.edu
__
han using rsync to copy from one machine to the other over the
network).
---
Mike VanHorn
Senior Computer Systems Administrator
College of Engineering and Computer Science
Wright State University
265 Russ Engineering Center
937-775-5157
michael.vanh...@wright.edu
___
It looks like this may just be a bug upstream:
https://access.redhat.com/solutions/3001891
Still trying the work-arounds.
---
Mike VanHorn
Senior Computer Systems Administrator
College of Engineering and Computer Science
Wright State University
265 Russ Engineering Center
937-775-5157
e else run into this problem, where you can’t create a new printer?
Thanks!
---
Mike VanHorn
Senior Computer Systems Administrator
College of Engineering and Computer Science
Wright State University
265 Russ Engineering Center
937-775-5157
michael.vanh...@
Webmin used to be considered insecure, and people would scream and yell if
you suggested using it. Has that changed?
mark
Ahh, I did not know of this.
Well, I'm back to suggesting OP take a little time and get comfortable with
firewall-cmd in the terminal. If we want our solid redhat clone
yum (CentOS/RedHat/Fedora)
By adding the Webmin repository and Jamie Cameron's key, it is
possible to install & maintain the latest Webmin/Usermin versions.
The following will install the latest Webmin version by adding the
webmin-repo and corresponding GPG key. Yum will resolve all the
necessary
Nice catch, Mr. Schumacher ---> The following modules are included as
standard with release 1.831 of Webmin. FirewallD firewalld.wbm.gz
Configure a Linux firewall using FirewallD, by editing allowed
services and ports.
This is likely the right tool for the job.
On Mon, Mar 27, 2017 at 5:00 PM, M
terminal where you
can get directly logged in and use firewall-cmd. :-)
http://cockpit-project.org/guide/latest/feature-terminal.html
On Mon, Mar 27, 2017 at 4:46 PM, Robert Moskowitz wrote:
>
>
> On 03/27/2017 03:24 PM, Mike wrote:
>>
>> I recently converted my empl
I recently converted my employer's firewall from pure iptabes to
firewalld and looked for something similar, more along the lines of
webmin, etc.
I didn't find anything close to a match.
In the end, it all came down to getting comfortable with
"firewall-cmd" in the shell.
Haven't used suricata, so
assign the adddress static.
3. Ask Linode to assign you a new IPv6
4. Wait for Linode to fix the problem.
Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
sable SElinux and see if that works.
# netstat --inet -l -n
Is the service listening on port 143?
# systemctl stop firewalld
Does it now work?
# setenforce 0
Does it now work?
Once you establish what's biting you then you can fix it. To force a
relabel do
# touch /.autorelabel
# reboot
M
This last update caused numerous services to stop working for me. I
fixed them with a relabel.
touch /.autorelabel
reboot
Try that and see...
Mike
On 01/23/2017 01:57 PM, Tim Smith wrote:
> Hi,
>
> I'm trying to grant dovecot the ability to manage its socket within
> the postfi
The SPF record for your email provider did not match the sending systems
for your domain. Possibly the IP address or DNS record changed recently
at your ISP?
On 01/18/2017 01:33 PM, TE Dukes wrote:
>
> -Original Message-
> From: CentOS [mailto:centos-boun...@centos.org] On Behalf Of Hal W
I've made 3 CentOS 7 installation attempts to configure a simple
firewall/router box with 2 nics.
I got myself into a circular scenario where NetworkManager and
firewalld and /etc/sysconfig/network-scrpts/ifcfg-* were
interfering or overwriting each other.
Needed to perform ifdown enp3s7 on th
# this device map was generated by anaconda
(hd0) /dev/vda
(hd1) /dev/vda
--
---~~.~~---
Mike
// SilverTip257 //
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
codes as keyboard input.
>
The USB barcode scanners I've used were detected as simple HID devices (on
Debian and Fedora).
Nothing but plug-and-play.
And yes, it acts just like keyboard input.
I don't have the model numbers handy, but I do believe one was a
Symbol-brand scanner
e not permission
to view content of this location
The error message is Chinese in my system, I translate it into English.
Thanks
Silly question...what are the permissions on /data?
--
Mike Burger
http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever
I have been buying off-lease used Latitudes and Precision laptops for
years for the sole reason that they are always Linux friendly and
solidly reliable. Most of them can be ordered new with Ubuntu.
Mike
On 11/22/2016 10:23 AM, Tony Molloy wrote:
> Hi,
>
> I'm recently r
If your battery backup can handle 2 hours of runtime then it almost
certainly has a network management interface. Why aren't you using it to
send alerts?
On Oct 30, 2016 12:05 AM, "Hadi Motamedi" wrote:
> Thank you for your reply. You are correct and the ups is present there but
> the battery ch
ment of Astronomy and Astrophysics
> Kavli Institute for Cosmological Physics
> University of Chicago
> Phone: 773-702-4247
>
> ___
> CentOS mailing list
&g
gt;
> Generally seeking new laptop advice. If Lenovo is not good is anyone
> using Toshiba?
>
> Mike
> ___
> CentOS mailing list
> CentOS@centos.org
> https://lists.centos.org/mailman/listinfo/centos
___
CANTLY, especially if you are using the host
system for other things.
Mike
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On Tue, 13 Sep 2016, TE Dukes wrote:
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of John R Pierce
Sent: Sunday, September 11, 2016 10:44 PM
To: centos@centos.org
Subject: Re: [CentOS] Iptables not save rules
On 9/11/2016 8:55 AM, TE
775
Ouch!
Affected Packages State
PlatformPackage State
Red Hat Enterprise Linux 5 bind97 Will not fix
Red Hat Enterprise Linux 6 bindWill not fix
Red Hat Enterprise Linux 5 bindWill not fix
Red Hat Enterprise Linux 7 bindWill not fix
--
Mike Bur
Capturing 10 gigabit traffic with no packet loss at line speed is difficult
at best. Make sure that you've configured the IRQ affinity properly on the
sending and receiving sides to start.
On Aug 14, 2016 11:52 AM, "Gordon Messmer" wrote:
> On 08/14/2016 03:20 AM, Anand Buddhdev wrote:
>
>> The
1 - 100 of 630 matches
Mail list logo
