Greetings Dear CentOS List Guys
i have some specific requirement but at this point i only with to know if
the following is possible.
1.) CENTOS Machine Acting as Router
2.) Machine is part of 10 VlANs Using 10 local interfaces
Is it possible that i can identify the source traffic and forward i
ad
>
> Am 07.02.2013 11:51, schrieb Prabhpal S. Mavi:
>> i have come across the problem where CentOS 6.3 x64 has more than 700
>> processes running. i am not sure where to start, what in normal or
>> abnormal.
>>
>> [root@jet]# ps -A
>> PID TTY
Dear List Users Greetings,
i have come across the problem where CentOS 6.3 x64 has more than 700
processes running. i am not sure where to start, what in normal or
abnormal.
[root@jet]# ps -A
PID TTY TIME CMD
1 ?00:00:03 init
2 ?00:00:00 kthreadd
3 ?
> 1. SPF was not designed to be used this way. It is doubtful that anyone
> has written anything that even remotely considered this option in use.
> You will likely have to write it yourself.
>
> 2. SPF is still in RFC testing, so it is not yet a full internet
> standard. And once it is, the stand
> 1. SPF was not designed to be used this way. It is doubtful that anyone
> has written anything that even remotely considered this option in use.
> You will likely have to write it yourself.
>
> 2. SPF is still in RFC testing, so it is not yet a full internet
> standard. And once it is, the stand
> are you sure you want to do this? It will definitely result in lots of
> legitimate mail being blocked, because SPF is by no means ubiquitous.
>
> You can set up your mail server to block mail if the SPF record suggests
> it, but I would never filter mail originating from domains having no SPF
>
Dear Friends,
i have setup SPF alright, postfix is performing check as well (results
below), but even if there is no SPF record exist for a domain, message is
still accepted.
how can i set the reject action, if no SPF available.
May 3 16:11:14 titan postfix/policy-spf[5353]: : SPF none (No appl
Dear All Greetings,
i am seeking help from guys with mysql knowledge. i can see lot of these
files in mysql directory. And they are eventually filling up the space on
the server. what these files are? some exists with very old time stamps.
such as February 2012. can these be deleted?
This Number
> ntpdate should be run just once and then just have ntpd on.. the nptdate
> should bring the server to the proper time and cause dovecot to
> fail..you should only need to run it once (assuming the server is left
> on and not off for long periods).
> I run ntpd as a daemon, but not ntpdate...
> y
>> But when i restarted the server, dovecot failed to start on boot (it is
>> virtual machine). with this error.
>>
>> dovecot: dovecot: Fatal: Time just moved backwards by 537 seconds. This
>> might cause a lot of problems, so I'll just kill myself now.
>>
>> immediately then, i tried to send one
> Hello, Prabh.
>
> Your answer lies in the info you provided:
>
> domainkeys=neutral (no sig); from=digital-infotech.net; dkim=permerror
> (future timestamp)
>
> Yahoo appears to think that your timestamp is off by some amount of time
> in the future.
>
> --
> Mike Burger
Hello Mike,
that actua
> Hello, Prabh.
>
> Your answer lies in the info you provided:
>
> domainkeys=neutral (no sig); from=digital-infotech.net; dkim=permerror
> (future timestamp)
>
> Yahoo appears to think that your timestamp is off by some amount of time
> in the future.
>
> --
> Mike Burger
> http://www.bubbanfrien
> Hello, Prabh.
>
> Your answer lies in the info you provided:
>
> domainkeys=neutral (no sig); from=digital-infotech.net; dkim=permerror
> (future timestamp)
>
> Yahoo appears to think that your timestamp is off by some amount of time
> in the future.
>
> --
> Mike Burger
> http://www.bubbanfrien
Hi Dear Community Friends,
it is few days now, i am trying to figure out why DKIM is working / not
working. Any assistance would be very much appreciable.
Server IP is not blacklisted ever, MX, PTR SPF, DKIM records are available
in DNS. why it is working at Gmail, why failing at Yahoo?
Gmail
dk
Dear Adam Tauno Williams
thanks for your response, i am not sure what did you advice. could you
please explain nit more if there is any other way to do it. as sounds in
your mail.
Thanks
> On Wed, 2012-04-25 at 11:42 +0000, Prabhpal S. Mavi wrote:
>> i think i must tell little back
MTP server is delivering message to my
postfix that has 8MB attachment. message was not fully transferred. lets
say that 4MB was transferred. and i issued "postfix reload". will that
connection drop or continue to deliver the mail?
Thanks / Rega
> On 18/04/12 10:04, Prabhpal S. Mavi wrote:
>> where as this URL (graph_view.php) exist on the server, that is under
>> Cacti folder "/var/www/html/cacti/graph_view.php".
>>
>> But Apache is looking under DocumentRoot that is
>> "/var/www/html/g
oper
> wrote:
>> On Wed, Apr 18, 2012 at 5:04 AM, Prabhpal S. Mavi
>> wrote:
>> [snip]
>>> if i try browsing cacti, i can login without problem. But if i try to
>>> follow other links on the page. For example i have clicked on Graphs
>>> icon.
>
Dear All,
Thank you very much for your assistance. yesterday, i sudden have to go
out from the office. i will try the solution and update you.
Thanks You. Prabhpal
> On 18/04/12 10:04, Prabhpal S. Mavi wrote:
>> where as this URL (graph_view.php) exist on the server, that is under
DocumentRoot actually disturb other front ends setup. i have
Nagios & zabbix installed on same machine. which i use to monitor stuff.
is there anything i can do to maintain DocumentRoot to default that is.
DocumentRoot "/var/www/html"
problem. everything is fine but there are other little problems. poller is
> unable to generate rrd files. etc, anyways.
>
> Thanks for your support.
> Prabhpal
>
>
>> On 14.4.2012 12:09, Prabhpal S. Mavi wrote:
>>
>>> i installed cacti on CentOS 6.2. eve
support.
Prabhpal
> On 14.4.2012 12:09, Prabhpal S. Mavi wrote:
>
>> i installed cacti on CentOS 6.2. every thing went smooth and i can see
>> the
>> login page as well.
>>
>> due to security reason cacti has to change the default password
>> (admin/admin) w
is tring to
look some where else. but so strange no log.
I will update your when resolved.
Thanks / Regards
> On 14.4.2012 12:09, Prabhpal S. Mavi wrote:
>
>> i installed cacti on CentOS 6.2. every thing went smooth and i can see
>> the
>> login page as well.
>>
&
n cacti has to change the default password
> (admin/admin) when i enter the default password i get the following error.
>
> The requested URL /auth_changepassword.php was not found on this server.
>
> Thanks / Regards
> Prabhpal S. Mavi
>
>
>
> ___
was not found on this server.
Thanks / Regards
Prabhpal S. Mavi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
for your response, it is grate information. it is true i missed the
> part of your mails.
>
> Thanks / Regards
>
>
>> On 12.4.2012 14:16, Prabhpal S. Mavi wrote:
>> ...
>>> i know these commands but if you will carefully look into logs, you
>>> will
>>
Dear Markus Falb
Thanks for your response, it is grate information. it is true i missed the
part of your mails.
Thanks / Regards
> On 12.4.2012 14:16, Prabhpal S. Mavi wrote:
> ...
>> i know these commands but if you will carefully look into logs, you will
>> notice that my
>
>
>
>
>
> --
> john r pierceN 37, W 122
> santa cruz ca mid-left coast
>
> _______
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/li
, ADDITIONAL: 0
;; QUESTION SECTION:
;193.25.211.41.in-addr.arpa.IN PTR
;; ANSWER SECTION:
193.25.211.41.in-addr.arpa. 10800 INPTR mail.digital-infotech.net.
;; Query time: 255 msec
;; SERVER: 8.8.8.8#53(8.8.8.8)
;; WHEN: Thu Apr 12 12:08:14 2012
;; MSG SIZE rcvd: 83
Thanks / Regard
Thanks / Regards
> On 12.4.2012 13:29, Prabhpal S. Mavi wrote:
>> Dear All Greetings,
>>
>> i am admin for ISP two years now, relay emails for more than 300
>> companies
>> (CentOS/Postfix). Relaying more than 10,000 messages every hours
>> successfully. no one h
have
problem with. Kindly advice
Thanks / Regards
> Hi,
>
> On Thu, Apr 12, 2012 at 2:29 PM, Prabhpal S. Mavi
> wrote:
>> it is something out of control, because it is not my problem. Our server
>> has all record created (A,MX,PTR,SPF etc). i have three relay
try from his server and see if it is deliverable to
r...@tata-nigeria.com
Thanks / Regards
Prabhpal S. Mavi
Apr 12 11:06:00 titan postfix/qmgr[11860]: C3C142E4012:
from=<@digital-infotech.net>, size=1391, nrcpt=1 (queue active)
Apr 12 11:06:02 titan postfix/smtp[12039]: C3C142E4012: ho
That was the reason i did
not get result from google.
Well Done Guys. !
Thanks / Regards
> Le 04/04/2012 14:27, Prabhpal S. Mavi a écrit :
>> Greetings Dear All,
>>
>> i am having difficulty o understand of the following log on CentOS_6.2
>> x86_64.
>> i tried googl
pidd[2265]: 2012-04-04 10:23:15 notice SSL plugin not
enabled, you must set --ssl-cert-db to enable it.
Thanks / Regards
Prabhpal S. Mavi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Dear Natraj, Thank you very much for your response, this is really greate
solution and I did not know about it.
Very good stuff indeed. I love it.
Thanks Natraj, for your greate advice.
Prabhpal
> On 04/01/2012 09:06 AM, Prabhpal S. Mavi wrote:
>> Dear Friends Greetings,
>>
>
Dear Friends Greetings,
i wish to setup SPF look up f0r Postfix on CentOS 6.2. I could not find
any document on the net describing the procedure. is anyone have
documentation i can follow to setup the SPF please?
Thanks / Regards
Prabhpal S. Mavi
llow
> relaying and authentication from my port 25 smtp server and require all
> of my mail clients to connect on the port that I designate, requiring
> TLS+SASL auth.
>
> Nataraj
>
> ___
> CentOS mailing list
> Cent
egards
> Jitendra Jha
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
Thanks / Regards
Prabhpal S. Mavi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Hi Dear All,
I thanks everyone for their input & explanation on this request. So much
valuable info you guys exchange through emails.
Well done
Thanks / Regards
> Am 31.03.2012 13:36, schrieb Jonathan Vomacka:
>> On 3/31/2012 7:11 AM, Prabhpal S. Mavi wrote:
>
>>> But
.com ESMTP Postfix (2.6.6)
But when i telnet to 465, i do not see 220 in response. is it normal?
[root@jet postfix]# telnet localhost 465
Trying ::1...
Connected to localhost.
Escape character is '^]'.
Thanks / Regards
> On 3/30/2012 12:49 PM, Prabhpal S. Mavi wrote:
>> Hi Dea
=permit_sasl_authenticated,reject
-o milter_macro_daemon_name=ORIGINATING
Thanks / Regards
> From: Prabhpal S. Mavi
>
>> i have Postfix Running On CentOS 6.2 x86_64, TLS/SASL is already
>> configured and working.
>> Can anyone please assist me how to configure Postfix
Greetings Dear Friends !
i have Postfix Running On CentOS 6.2 x86_64, TLS/SASL is already
configured and working.
Can anyone please assist me how to configure Postfix to listen and accept
TLS connections on smtp:465?
Thanks / Regards
Prabhpal S. Mavi
> On 03/30/2012 05:41 AM, Prabhpal S. Mavi wrote:
>> Greetings Friends,
>>
>> is any one knows why i see squirrelmail login interface like below
>> Live Example Can Be Seen Here:
>> https://mail.digital-infotech.com/webmail
>>
>> i have tried to install
oject Team
< bgcolor="#ff" border="0" width="350"><>< bgcolor="#dcdcdc">Digital
Infotech Limited Login <>< bgcolor="#ff"> < bgcolor="#ff"
border="0" width="100%">&
/ regards
> Prabhpal S. Mavi,
>
> Can you provide a URL to use to view what it actually looks like?
> Is it on an external server?
>
> I installed squirrelmail from the tar.bz2 file available from their web
> site at the link.
> http://squirrelmail.org/download.php
>
> Here
Login <>< bgcolor="#ff"> <
bgcolor="#ff" border="0" width="100%"><>< width="30%">Name: <
width="70%"> <>< width="30%">Password: < width="70%"> <><>
Thanks / Regards
Prabhpal S. Mavi
Email: prabh...@digital-infotech.net
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
RROR 22 - "The requested URL returned error: 407"
> Trying other mirror.
> Error: Cannot retrieve repository metadata (repomd.xml) for repository:
> google-chrome. Please verify its path and try again
> [BTIS@WORKSTATION3 ~]$
>
> On Tue, Mar 27, 2012 at 3:39 PM, Prabhpal S. Mavi
y="http://yum-user:qwe...@mycache.mydomain.com:3128";
>>> export http_proxy|
>>>
>>> *Example 5. Profile Settings for a Secured Proxy Server*
>>>
>>> [Note]The |http_proxy| Environment Variable
>&g
, add these to the
> URL. To include the username |yum-user| and the password |qwerty|, add
> these settings:
>
> |# The Web proxy server, with the username and password for this account
> http_proxy="http://yum-user:qwe...@mycache.mydomain.com:3128";
> export http_proxy|
configure system wide proxy variable.
Use lynx to troubleshoot
Please cross check we normally export proxy veritable such as following
http_proxy=
yes i configured the yum.conf
> proxy=http://10.101.16.4:8080
> proxy_username=my_username
> proxy_password=my_password
> but still the same proble
> On 03/26/12 11:05 PM, arun kumar wrote:
>
Where is proxy error? It seems your server has no Internet connectivity.
Are you new admin of this server? If you are expecting someone has
exported proxy veritable then check by typing echo $http_proxy
Thanks : regards
> I have centos 6.0 in my syste
Hi Kaushal,
in addition to the solution provider by Mihamina to monitor the load
average on your server, "htop" on CentOS can be more clear for you to read
the output as well.
install rpmforge repo
yum insall htop, type htop when done. look ay load average figure. then
find out the cause.
Thank
52 matches
Mail list logo
