On 29/08/2011 15:46, James B. Byrne wrote:
> I am experimenting with KVM and I wish to create a virtual machine
> image in a logical volume. I can create the new lv without problem
> but when I go to format its file system then I get these warnings:
>
> Warning: WARNING: the kernel failed to re-read the partition table
> on /dev/sda (Device or resource busy). As a result, it may not
> reflect all of your changes until after reboot.
> Warning: Unable to open /dev/sr0 read-write (Read-only file system).
> /dev/sr0 has been opened read-only.
>
> When I take a look at things using parted I see this:
>
> # parted -l print
> Model: ATA WDC WD5000AAKS-0 (scsi)
> Disk /dev/sda: 500GB
> Sector size (logical/physical): 512B/512B
> Partition Table: msdos
>
> Number Start End Size Type File system Flags
> 1 1049kB 525MB 524MB primary ext4 boot
> 2 525MB 500GB 500GB primary lvm
>
>
> Model: Linux device-mapper (linear) (dm)
> Disk /dev/mapper/vg_inet02-lv_guest01: 129GB
> Sector size (logical/physical): 512B/512B
> Partition Table: loop
>
> Number Start End Size File system Flags
> 1 0.00B 129GB 129GB ext4
>
>
> Model: Linux device-mapper (linear) (dm)
> Disk /dev/mapper/vg_inet02-lv_log: 1049MB
> Sector size (logical/physical): 512B/512B
> Partition Table: loop
>
> Number Start End Size File system Flags
> 1 0.00B 1049MB 1049MB ext4
>
>
> Model: Linux device-mapper (linear) (dm)
> Disk /dev/mapper/vg_inet02-lv_tmp: 8389MB
> Sector size (logical/physical): 512B/512B
> Partition Table: loop
>
> Number Start End Size File system Flags
> 1 0.00B 8389MB 8389MB ext4
>
>
> Model: Linux device-mapper (linear) (dm)
> Disk /dev/mapper/vg_inet02-lv_home: 4194MB
> Sector size (logical/physical): 512B/512B
> Partition Table: loop
>
> Number Start End Size File system Flags
> 1 0.00B 4194MB 4194MB ext4
>
>
> Model: Linux device-mapper (linear) (dm)
> Disk /dev/mapper/vg_inet02-lv_swap: 8321MB
> Sector size (logical/physical): 512B/512B
> Partition Table: loop
>
> Number Start End Size File system Flags
> 1 0.00B 8321MB 8321MB linux-swap(v1)
>
>
> Model: Linux device-mapper (linear) (dm)
> Disk /dev/mapper/vg_inet02-lv_root: 53.7GB
> Sector size (logical/physical): 512B/512B
> Partition Table: loop
>
> Number Start End Size File system Flags
> 1 0.00B 53.7GB 53.7GB ext4
>
>
> Warning: Unable to open /dev/sr0 read-write (Read-only file system).
> /dev/sr0
> has been opened read-only.
> Error: /dev/sr0: unrecognised disk label
>
> The host system is CentOS-6.0 with updates applied. I did a manual
> disc configuration on initial install but I do not recall
> specifically dealing with /dev/sr0 at any point.
>
> Can anyone explain to me what is happening here and what I should
> do? Am I constrained to reboot the server each time that I make
> changes to an LV? Is there some configuration change I need make to
> the base system?
>
> The favour of a direct copy of any reply to the mailing list is
> requested as I am a digest subscriber.
>
You do not need to reboot every time you adjust a Logical Volume. Do you
also need to format the file system for a KVM guest's Logical Volume?
I'm currently juggling servers to try and get a free machine to test KVM
on Centos 6, but i have recently found, with another RHEL clone I'm
testing, that if you do not set up the LogVol with virsh or i suppose
virt-manager you will have issues getting the guest machines to run.
If you look at chapter 26.1.4.1 & 26.1.4.2 of the Red Hat Visualization
Guide, for RHEL6, it explains how to use fdisk to create an partition
for the Logical Volume, set it to a Linux LVM type and create the
storage pool for the KVM guests (page 217 & 218).
On my current RHEL clone test system, to create the VolGroup / Storage
pool i used the virsh commands on pages 222 & 223 of the Red Hat
Visualization Guide (which were similar to the following):
# virsh pool-define-as guest_images_lvm logical - - /dev/cciss/c0d0p3
libvirt_lvm /dev/libvirt_lvm
# virsh pool-build VolGroupGuests
# virsh pool-start guest_images_lvm
# virsh pool-autostart guest_images_lvm
# virsh pool-list --all
Name State Autostart
-----------------------------------------
guest_images_lvm active yes
To create the actual logical volume for the virtual machine I used the
following command:
# virsh --connect qemu:///system vol-create-as guest_images_lvm volume1 20G
I don't remember formatting a file system prior to installing the KVM
guest, but new i am new to KVM and I'm experimenting as well.
jk
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
