Tony Mountifield wrote:
> Ok, I've now checked up and it was the ML110 where I discovered that
> behaviour.
> The DL360 I worked with was completely different, using a driver called cciss.
>
CCISS is for smartarray cards, which are typically LSI Logic cards that
HP has reprogrammed. these a
In article ,
Tony Mountifield wrote:
> In article <4a700f7a.6070...@krediidipank.ee>,
> Veiko Kukk wrote:
> > Tony Mountifield wrote:
> > > That's probably why. To use AHCI you need to set it to RAID mode.
> > > Having done that, you can still use the drives independently if you
> > > prefer kern
In article <4a700f7a.6070...@krediidipank.ee>,
Veiko Kukk wrote:
> Tony Mountifield wrote:
> > That's probably why. To use AHCI you need to set it to RAID mode.
> > Having done that, you can still use the drives independently if you
> > prefer kernel RAID; you just have to go into the BIOS RAID se
Tony Mountifield wrote:
> That's probably why. To use AHCI you need to set it to RAID mode.
> Having done that, you can still use the drives independently if you
> prefer kernel RAID; you just have to go into the BIOS RAID setup and
> set the drives to JBOD mode (or something like that), by telling
Joshua Baker-LePain wrote:
> On Mon, 27 Jul 2009 at 1:19pm, Veiko Kukk wrote
>
>>> I'm not sure for this particular model server, but normally this is a
>>> *BIOS* setting for the SATA controller.
>> There are no settings in BIOS for AHCI mode, it's only possible to
>> choose between raid and sata
> Sender: centos-boun...@centos.org
> > To: CentOS mailing list
> > ReplyTo: CentOS mailing list
> > Subject: Re: [CentOS] Centos 5.3, no AHCI on HP DL320 G5p?
> > Sent: Jul 27, 2009 5:23 AM
> >
> > Veiko Kukk wrote:
> >> I have one HP Proliant DL320
Joshua Baker-LePain wrote:
> On Mon, 27 Jul 2009 at 1:19pm, Veiko Kukk wrote
>
>>> I'm not sure for this particular model server, but normally this is a
>>> *BIOS* setting for the SATA controller.
>> There are no settings in BIOS for AHCI mode, it's only possible to
>> choose between raid and sata
On Mon, 27 Jul 2009 at 1:19pm, Veiko Kukk wrote
>> I'm not sure for this particular model server, but normally this is a
>> *BIOS* setting for the SATA controller.
>
> There are no settings in BIOS for AHCI mode, it's only possible to
> choose between raid and sata controller mode, i have chosen s
gt; Subject: Re: [CentOS] Centos 5.3, no AHCI on HP DL320 G5p?
> Sent: Jul 27, 2009 5:23 AM
>
> Veiko Kukk wrote:
>> I have one HP Proliant DL320 G5p, where for some reason, the AHCI mode
>> is not enabled. According to server specs, it should have AHCI/NCQ
>> capability,
I had to disable it with ahci=no at boot time, have you tried ahci=yes at boot
time of kernel?
--Original Message--
From: Ned Slider
Sender: centos-boun...@centos.org
To: CentOS mailing list
ReplyTo: CentOS mailing list
Subject: Re: [CentOS] Centos 5.3, no AHCI on HP DL320 G5p?
Sent: Jul
Veiko Kukk wrote:
> I have one HP Proliant DL320 G5p, where for some reason, the AHCI mode
> is not enabled. According to server specs, it should have AHCI/NCQ
> capability, but ata_piix module gets loaded during bootup, not ahci module.
> Any ideas how to enable AHCI mode?
>
I'm not sure for t
I have one HP Proliant DL320 G5p, where for some reason, the AHCI mode
is not enabled. According to server specs, it should have AHCI/NCQ
capability, but ata_piix module gets loaded during bootup, not ahci module.
Any ideas how to enable AHCI mode?
lspci output:
# lspci
00:00.0 Host bridge: Int
12 matches
Mail list logo