Thank you Ernesto.
Yes - so I see that all the eno1, eno2, and docker0 interfaces show up with an
MTU of 1500 which is correct, but since these interfaces are not being used at
all, they shouldn’t be flagged as a problem. I’ll just ignore the errors for
now, but would be good to have a way to
Thanks, Kai! We moved the Dashboard tickets to a separate subproject. I
just moved that tracker. It should be easy to remove at least the NICs down.
Kind Regards,
Ernesto
On Fri, Aug 6, 2021 at 9:13 AM Kai Stian Olstad
wrote:
> On 04.08.2021 20:31, Ernesto Puerta wrote:
> > Could you please
On 04.08.2021 20:31, Ernesto Puerta wrote:
Could you please go to the Prometheus UI and share the output of the
following query "node_network_mtu_bytes"? That'd be useful to
understand
the issue. If you can open a tracker issue here:
https://tracker.ceph.com/projects/dashboard/issues/new ?
Actually it’s also complaining about docker0 as well. Not sure how to change
the MTU on that one though. It’s not even up.
-Paul
> On Aug 4, 2021, at 5:24 PM, Paul Giralt wrote:
>
> Yes - you’re right. It’s complaining about eno1 and eno2 which I’m not using.
> I’ll change those and it
Yes - you’re right. It’s complaining about eno1 and eno2 which I’m not using.
I’ll change those and it will probably make the error go away. I’m guessing
something changed between 16.2.4 and 16.2.5 because I didn’t start seeing this
error until after the upgrade.
-Paul
> On Aug 4, 2021, at
On 04.08.2021 22:06, Paul Giralt (pgiralt) wrote:
I did notice that docker0 has an MTU of 1500 as do the eno1 and eno2
interfaces which I’m not using. I’m not sure if that’s related to the
error. I’ve been meaning to try changing the MTU on the eno interfaces
just to see if that makes a
I’m seeing the same issue. I’m not familiar with where to access the
“Prometheus UI”. Can you point me to some instructions on how to do this and
I’ll gladly collect the output of that command.
FWIW, here are the interfaces on my machine:
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group
Hi J-P,
Could you please go to the Prometheus UI and share the output of the
following query "node_network_mtu_bytes"? That'd be useful to understand
the issue. If you can open a tracker issue here:
https://tracker.ceph.com/projects/dashboard/issues/new ?
In the meantime you should be able to
